Quote:
Originally Posted by soi3847
My G20 was not Gesture Control. (Now Can Gesture Control)
Can Retrofit Gesture Control.
Need 2 Wiring and FZD Module. (with Esys Coding)
-Parts Number-
FZD Module with Gesture Control
61319483615
61319460012
61319893141
61316986144
61319875363
61317910960
61315A0F616
61315A25179 - One of These
FZD Pin
61139230107 - NanoMQS 0.22-0.35mm
BDC Pin
61131383776 - MQS 0.2-0.35mm
-Need Tools-
Trim Remover
IWISS Press Tool
Star Wrench T15
Star Wrench T20
*Torque Tools (preferbly to have)
-Main DIY-
1. Removal FZD Module
2. Make Wire
3. Change FZD Module
4. VO Coding
-Wiring-
Check Image
Go DIY (watch my video or repair guide)
(I'm so sorry... video is not Eng sub. only Korean)
Check PDF File or Video
1. Remove FZD Module
2. Remove A Pillar Trim & BDC Cover
3. Make Wire FZD to BDC
4. Assemble New FZD Module
5. Add VO 6U8
5. BDC, MGU, FZD Code or Flashing
(Maybe no need BDC Code) |
Great write up where do you get your circuit diagrams from? I am trying to retrofit Harman Kardon Surround speakers located in the D pillar of my 2019 Australian spec G05 X5 The cables for the speakers go into the RAM ECU and would like to know which are the correct pins to use.