Yeah I'm using the power magic Pro. I wired the power supply through the front drivers headlining down the drivers side A pillar. I didn't actually take the A pillar lining, however to feed it down to the fuse box in the drivers footwell I had to take the side trim by the door (one in the photo). It's held in by 4 metal clips, I'm not sure if you could just yeah the trim off but as I have the extended storage I could take the drivers side storage cubby off and gain access to release the clips a bit before yanking.
For the fuses I used fuse 29 for the constant live (I believe it's the tilt sensor) it seems to work (or fuse 39 for the lights)
Then for the ignition power I used fuse 46 which is for the 12v sockets.
|