Quote:
Originally Posted by drdino
So having done a bit of comparison of the CAFD without and with heated steering wheel (248) and it looks like its the following modules and parameters that are affected:
BDC_BODY3
• LIN_VARIANTE_LRE: lre_tlc (03) -> lre_tlc_lhz_taster (05)
• LRE_LHZ_VERBAUT: nicht_aktiv (00) -> aktiv (01)
• CODDT_BYTE_00_LRE_LIN: nicht_aktiv (00) -> LHZ_LRE_mit_TASTER (03)
• CTRL_HOD_CODG_STWH_LIN: nicht_verbaut (02) -> verbaut (01)
HU_MGU
• SVS_CONTROL_LENKRADHEIZUNG: nicht_aktiv (00) -> aktiv (01)
I wonder what the CTRL_HOD_COFG_STWH_LIN actually does. HOD is the Hands-On-Detection bit for the Driver Assistant Pro, unless it's a parameter for configuring the BDC for both HOD and STWH=Steering Wheel Heater?
|
Hey
drdino Did you manage to get the heating activated? You are right about the STWH=Steering Wheel Heating-> it then says the value should be 02 for "Not built in" or 01 for "built-in".
I am just bought an m340d, and the previous owner specced almost everything on the car apart from the STH