Thread: M340i ZTK spare
View Single Post
      05-09-2019, 10:37 AM   #4
OldOne
Enlisted Member
49
Rep
44
Posts

Drives: '20 M340i
Join Date: Jan 2016
Location: NY

iTrader: (0)

These are the spacers I got:

https://www.ebay.com/itm/Pair-Of-15m...53.m2749.l2649

Hubcentric, comes with the correct length bolts, everything seems to be of decent quality.

Yes looks like square 255 setup is possible. I actually tried test fitting one rear wheel up front, and it touches the strut as is. With the same 15mm spacer, it bots on fine, with around 9mm of strut clearance measured at the closest point with the car jacked up. With the car dropped to the ground, I'd say it sticks out a little bit too much. Doesn't appear to be rubbing anywhere at full lock. I didn't drive around like this though. This is a 19x8.5 ET40 wheel, so a 15mm spacer effectively makes it ET25. I think ET30 (or a 10mm spacer) would be ideal. But you never know till you try...
Attached Images
   
Ilyam5480.50