You should have a look at ICEDRIVER on AliExpress, because thatīs the manufacturer of these modules and you donīt pay a markup.
https://de.aliexpress.com/item/1005001329013245.html
And the installation isnīt as easy as for the G80 series!
The LED boards are glued to the heatsinks and you need to switch them.
And you need to remove the headlights and loosen the front bumper to get to the last screw for the outer DRL/turn signal module.
I wanted to have the original modules untouched so i bought a second set of modules.
You can use the modules of the adaptive LED instead of the Laser headlights, because the heatsinks are identical and the modules are cheaper.
2 x inner DRL: 63118496134 / 63119477985 (X5 EPX-BM-092)
Left outer DRL/turn signal: 63118737143
Right outer DRL/turn signal: 63118737144
You can also use the inner modules of the X5 series, the heatsink is identical.
With the new modules you get a small portion of thermal glue.
To remove the old boards you can use a heat gun and then carefully remove the old boards.
Use a thin layer of the new thermal glue and spread it over the new board.
For the inner DRL boards you need to align them properly because the boards have bigger sized holes.