I think you have standard M sport brakes.
The 2 piston placement circles are too close together. (Purple)
If you look at the 3 dots above each piston ciclenon the outer edge you will see INDENT - HOLE - INDENT is the M sport and the M performance have the holes on the outside of each set of indentations. (Orange)
The opening above the ///M logo looks smaller in the comparison photo you posted, but this is due to the slightly different angle in that shot.
The M performance calipers would extend further above and below the standard sized rotor you have (green)
Last edited by siegester; 12-07-2020 at 10:42 AM..
|