Quote:
Originally Posted by VipinLJ
Yes you can. We can set custom values there. I’ve taken screenshots of the stock bytes. I’ll post them here from my phone. Way too many screenshots though and I’m sure it’ll piss a few people off 
And when you say change 90, E0, 90 to FF, 00, 00, you mean I have to change all three? So only the white option goes to red? Or is it the bronze and white, orange and white, green and white etc that turns to red?
When I look, it shows bytes 3,4,5, 8,9,10, 13,14,15 as 90,E0,90. I thought that would be easier than attaching 15 screenshots here 
In my car, 360A starts with 00,1A,01,90,E0,90,FF,02,90,E0,90,00,03,90,E0,90,FF ..... |
If you change 90 E0 90 to FF 00 00 then all of your white goes to red.
You need to change all 3 of 90 E0 90 to FF 00 00 , actually 90 E0 90 is very light green, but BMW set it as white.
You can find how it work previous post in this thread.
Quote from previous post,
Original bmw rgb are
- 90,E0,90 - WHITE
- D7,6E,14 - BRONZE
- 93,1A,01 - ORANGE
- 00,20FE - BLUE
- 10,FE,32 - GREEN
- 78,3C,FE - LILAC