View Single Post
      06-11-2019, 07:58 PM   #1
vicfalc09
Second Lieutenant
vicfalc09's Avatar
211
Rep
274
Posts

Drives: M340i xDrive
Join Date: Feb 2019
Location: New Jersey

iTrader: (0)

vicfalc09 | BMW M Performance Carbon Fiber Mirror Cap Installation

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.



Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.





Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.





Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.



BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg
Appreciate 6