After almost 3 years, I figured this out!!!!
Couple of plans got cancelled tonight and I found myself messing with the car and I got everything to work via Bimmer Code thanks to all who contributed to this thread.
Here is what I have done based on all the data that I have gathered through this thread. Full disclosure: Do this at your own risk!!!!
This is what worked for me.
Make sure that you have the latest version of Bimmer Code installed on your device.
Body Domain Control Menu, Expert mode change everything below as stated previously.
LIC_FEATURE_14 enable -> disable
LIC_NIVEAU_OVVERRIDE_INDEX G20_US_code2 -> G22_ECE_code2
LIC_NIVEAU_OVVERRIDE_DATA_0 G20_US_code2 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_INDEX G20_US_code1 -> G20_ECE_code1
LIC_LOG_LAMP_2_PHYS_LAMP_DATA G20_US_code1 -> G20_ECE_code1
LIC_EDGE_CUTTER_RULE_ASSIGNMENT G20_US_code -> G20_ECE_code
And then go ahead and execute the coding.
Now this is the step that we all have been missing.
Once you are done with above coding, do not touch anything and go back to the expert mode and pull up
LICVERSIONDATA
Bimmer code has different values
added to this list after you code above which were not present before or if you do all the coding at once. Based on the actual codes that
larrylam646 &
moproblems provided, I scrolled through the entire list and found values that matched their data around 98%. Following values were provided for by Larry and Moproblems:
71,14,09,02,08,44,06,4F,00,0A,14,02,B4,C8,02,F0,0F ,3E,D4,2C,27,32,03,03,07,02,28,78,3F,EF,16,0C,04,0 A,27,0F,77
I studied the entire list carefully and what I ended up choosing was the only set of data that started with
71, 14 and 09 which is identified as UNKNOWN_28 in my case (based on your vehicle's options your UNKNOWN number might be different) (Pay attention to the values!). The rest of the data on Bimmer code under any of the other UNKNOWNS were not even a close match and there was only one set of data that started with 71 in my case.
See below pic for UNKNOWN_28 for the values I selected.
Go ahead and execute coding again and then you are DONE!
Full set of Turn Signals that are separated from brake lights just as BMW designed!
I tested everything that I can while in the garage and everything works just as it would on a Rest of the Word (ROW) spec cars.
I will have to double check emergency braking feature and some other stuff when I drive the car tomorrow but brake lights, back up lights, turn signals, DRLs, parking lights (all), parking lights left & right & etc work perfectly with no hyper flashing on turn signals!!!!
Time to order some beautiful AMBER tail lights now
Let me know if you have any questions and thanks to all who contributed to this thread. I might create a separate thread to document this whole thing so that other folks don't have to read through this whole thing.
Let me know if you have any questions.
PS: My car's options are listed in my signature per the option codes BMW offered at the time of ordering. I do have Laser Lights which I don't know makes any difference as far as coding is concerned.
