Quote:
Originally Posted by VipinLJ
Nope. You don’t need to change the hex code for white (90, E0, 90). Let that be as is in 360A. Instead, change the value for bronze (D7, 6E, 14) which are bytes 18, 19, 20, 23, 24, 25, 28, 29, 30 to red (FF, 00, 00). Then go to 360D and change byte 3 to 03 (it is originally 00 for white; 03 makes it blue and 01 changes from bronze to red since we changed it in 360A).
With that coding, you get blue where it was originally white (ONLY when you choose bronze and white; it remains white in the other options such as orange and white, green and white, blue and white etc) and red where it was originally bronze. When you choose only bronze, all the lights turn red. Basically, the photo I posted of my car in my previous post.
Hope that helps.
|
Amazing! Could you provide to us step by step what you do via bimmercode expert. I think it will be much easier for us and other colleagues on our forum to understand and add this position to coding directory. As I noticed , did you add custom value, because on iOS I couldn’t edit profiles like g05g20 etc via bimmercode