View Single Post
      08-18-2019, 05:19 PM   #4
hubbahubba
Captain
hubbahubba's Avatar
8710
Rep
859
Posts

Drives: M3CX
Join Date: Jul 2019
Location: Az

iTrader: (0)

Quote:
Originally Posted by joepimentel View Post
Thanks. Yes, I did it all myself. The mirror caps and front intake accent was harder than I expected to remove. It’s more than just popping off the mirror and unclipping the mirror caps (as with the F30). With the G20, the signal lights are screwed to the cap. To get to one of the screws you need to unscrew and disassemble some in the internal components — pulling out an internal cover was tricky. vicfalc09 has a good write up here that I used as a rough guide:

https://g20.bimmerpost.com/forums/sh....php?t=1623725

If you do it just make sure to tape off the bottom edge of the mirror housing so you don’t scratch it with a plastic trim tool.
Thank you for the heads up, will save that for when my car shows up. Really does look nice. Much appreciated!
Appreciate 0