View Single Post
      12-16-2019, 07:14 PM   #14
pneumodoc
Lieutenant
pneumodoc's Avatar
232
Rep
422
Posts

Drives: G20, G01
Join Date: Apr 2019
Location: Seattle

iTrader: (0)

Quote:
Originally Posted by RPN View Post
Thanks much for pulling this info together guys. Wanted to add another success to the thread. Just completed install in my M340.

Also wanted to highlight the suggestion to remove the mirror. This is 100% the way to go but watch out for sudden release or you might unnecessarily strain the wire harness you’re trying to use. Put two hands on the mirror base right up against the windshield and apply gentle, progressive force down the plane of the windshield. There is minimal slack to the wires so as soon as the mirror is free it’s pulling on them. Immediately bring one had around and disconnect.
Agree! I did the same thing. I tried messing with the wiring harness from behind the mirror for a few minutes, and then just slid the mirror off and that was much easier. I used one small pin for the red lead, and one large pin for the black ground lead. Worked like a charm and both were nice and secure. Thank you all for your help and the pictures!
Appreciate 1