After a couple tries, I finally found a power source that switches off (after around 6-10 minutes).
Disclaimer: I am not responsible for any damage you might cause to your vehicle.
Parts used:
RJ11 Mirror Wire Tap - I used the smaller tap inserts.
BlendMount BMX-2018 (for Escort Max 360)
Instructions:
Step 1 - Remove the plastic mirror housing. This can be done by using a plastic trim removal tool. I started from the top and slowly separated the trim.
Step 2 - Remove the bottom plug. This can be difficult to remove. I had to use the plastic trim removal tool to keep one side of the plug down while pulling on the other side. Be careful while removing it.
Step 3 - Insert the wire taps. The red tap (12v) inserts into the red/blue wire plug socket. The black (ground) inserts into the brown/black wire plug socket.
Step 4 - Reinstall the bottom plug and hide the wires. I ran the cable out by the mirror stem.
Step 5 - Reinstall the plastic mirror housing trim
Step 6 - Install BlendMount
__________________
M340i: Arctic White, 790M wheels, Cognac interior, Aluminum Tetragon trim - Totaled
|