Hi,
When I coded Video in Motion, it worked for videos, BUT it didn't seem to work for the on-board owner's Manual. I did some digging in the HG_MGU module of my M340 and found the following functions which I changed from Aktiv to NichtAktiv to allow use of the on-board owner's manual:
- SL06_IBA1
- SpeedLock_IBA_Access_CCM
- SpeedLock_IBA_Short
- SpeedLock_IBA_Index
- SL20_Contacts_Note
While the last function is not part of the manual, I found it useful to also make it available while in motion