Quote:
Originally Posted by siegester
So I had this working on 07.2019 with @larrylam646's values, but I get hyper flashing with those values after being updated to 07.2020. Attached is the new diff of 5665 that I generated between ECE (5U71) and US (5U73). Yellow are unchanged differences from 07.2019, green are new value differences, and red are values that are still different, but have changed. There were a few previously different values that are now the same, and thus are not listed in my sheet. After making these new changes the rear turn signals function independently without hyper-flashing. Maybe these values will help others with the hyper-flashing issues too.
For a more copy/paste friendly version, view the PR I have up for Esys cheats here - https://github.com/packetpilot/bmw-f...0783afcf8f2eb0
|
Successfully coded de-coupling the brake lights from the turn signals using the values above! There were a few UNK-PARAMs that weren't available - changed those to "G20, G21...ECE Code 1/2" as stated by jk1112 in a previous post (page 4 I believe)
Am running on 07.2020 software and used EsysX and Esys 3.27.1. Unfortunately, some of the parameters were not available via Bimmercode, but since I had experience with Esys on my previous F30, it wasn't too difficult to FDL code the changes between NA and ECE parameters!