-Two-bucket wash with Carpro Reset
-Full Clay of the entire surface.
-Light polish with Meguiars D302 MF finishing polish to remove some light water spots and get the paint really jeweled.
-Wiped down with Carpro Eraser to get off any oils or residues from the polishing etc.
-one coat of Gtechniq Crystal Serum Light
-two coats of EXO V4
Cleaning, decontamination, and polishing took about 2.5-3 hours at a leisurely pace. This is a new car so there wasn't much paint correction needed.
Applying the CSL took about an hour or so give or take. You should wait at least an hour before applying the EXO. I decided to give it the full 12 hours suggested for best results.
The next morning I put on one coat of EXO which took about an hour, waited 2 hours then applied the 2nd coat. All told it took about a day and a half.
I got the kit from Autogeek.
https://www.autogeek.net/gtechniq-exo-csl-kit.html