[Bianchi Dave]

Probably a long shot, but does anyone have a set of Motech MW 20" wheels in any design, in their G20/G21 fitment (more aggressive offset than OEM) but NOT fitted lowering springs?
Just exploring options and can't find any pics online....

[P-ToK72]

Originally Posted by Bianchi Dave

Probably a long shot, but does anyone have a set of Motech MW 20" wheels in any design, in their G20/G21 fitment (more aggressive offset than OEM) but NOT fitted lowering springs?
Just exploring options and can't find any pics online....

Bianchi Dave i think you might struggle to be honest as i don't recall seeing any without having been lowered on ACS or Eibach Springs.

Have you thought of getting in touch with Motech and asking if they have any images themselves either from finished cars or during development?

[Bianchi Dave]

Originally Posted by P-ToK72

Bianchi Dave i think you might struggle to be honest as i don't recall seeing any without having been lowered on ACS or Eibach Springs.

Have you thought of getting in touch with Motech and asking if they have any images themselves either from finished cars or during development?

Yeah, that's my next port of call. Not too keen on springs as the 'extra' ride height comes in handy with what I do for a living. I'm just concerned the extra poke of the Motechs may look a bit monster truck without springs also, so if I did go 20's might hold out for OEM 795m instead. Will see

[P-ToK72]

Originally Posted by Bianchi Dave

Yeah, that's my next port of call. Not too keen on springs as the 'extra' ride height comes in handy with what I do for a living. I'm just concerned the extra poke of the Motechs may look a bit monster truck without springs also, so if I did go 20's might hold out for OEM 795m instead. Will see

If they have any on the ramps being fitted any time soon maybe they can drop it down so it sits about right the standard height. It's only a couple of minutes while they take a few pics.

[Bianchi Dave]

I've asked the question - they'll probably think I'm weird!

[P-ToK72]

Originally Posted by Bianchi Dave

I've asked the question - they'll probably think I'm weird!

What does this crazy man mean, he doesn't want lowering springs ?

To be fair, they're a good bunch and i'm sure they'll be accommodating.

[Bianchi Dave]

Originally Posted by P-ToK72

What does this crazy man mean, he doesn't want lowering springs ?

To be fair, they're a good bunch and i'm sure they'll be accommodating.

Mike managed to find a photo! LCI G21 but gives a good idea, doesn't look ridiculous so something to think about.

[P-ToK72]

Originally Posted by Bianchi Dave

Mike managed to find a photo! LCI G21 but gives a good idea, doesn't look ridiculous so something to think about.

If you decide to go with it and come down to Motech, rather than having them posted, let me know and i'll shoot across and catch up with you.

I'm not that far from there and it'll be a chance to see the almost twin car of mine. I had pics of yours from Tony while mine was on the boat.

[Bianchi Dave]

Originally Posted by P-ToK72

If you decide to go with it and come down to Motech, rather than having them posted, let me know and i'll shoot across and catch up with you.

I'm not that far from there and it'll be a chance to see the almost twin car of mine. I had pics of yours from Tony while mine was on the boat.

Unfortunately I'm up north of Dundee, so it would be courier job. I'm very much undecided at present and Mrs BD is not exactly impressed

Do you mean Tony as in TRL? If so, I didn't buy new from him. Mine was a used purchase in Dec 22, from Williams Bolton. FWIW they were good to deal with!

[P-ToK72]

Originally Posted by Bianchi Dave

Unfortunately I'm up north of Dundee, so it would be courier job. I'm very much undecided at present and Mrs BD is not exactly impressed

Do you mean Tony as in TRL? If so, I didn't buy new from him. Mine was a used purchase in Dec 22, from Williams Bolton. FWIW they were good to deal with!

My apologies, i had it in my nogin that you were the same Dave that collected a near identically specced M340i Touring from TRL a week or two before i did. Tony (TRL) had sent me pics of that car during it's preparation to show me how that looked as a teaser for what was to come.

I can see why you won't be making the journey to Wellingborough, that would be a trek for you. I know another M340i Touring owner that had Motech wheels posted to the South Coast without any issues so rest assured there.

If you are considering the 795M wheels worth getting in touch with Cotswold BMW. They did me a very competitive price when i was looking but i was put off by the fact that they come with 20 inch RF tyres as opposed to PS4s on the MW-3.

Let us know which way you decide to go. Buy the other half some Flowers and a Bottle of Wine, hopefully that'll sweeten her up

[Bianchi Dave]

Going to take a lot more than flowers and wine, she's really not amused. Tbf 3k is a lot to spend on wheels I don't need. Still loads of tread on my stock 19 GY tyres, plus the wheels were refinished in black just last summer.

The tread won't wear that quickly either, with having winters on 4-5 months of the year.

That's where the 795s make more sense, as I could sell my current wheels to offset cost - would need to keep them if I bought Motechs to put back on car when selling (although that will be a while I suspect).

There are a few used Motech sets on ebay around the 2k mark though, but she's made her feelings clear on that too! Think I'll trade her in for a more understanding wife 🤔

Re Cotswolds, I've bought a few parts from them, always very competitive.

In no rush but if a set comes up at a price I (OK she) can't refuse I'll be all over them

[mattaland]

Bianchi Dave - Do you still have that photo of the MW-3's without the lowering springs? Could you share it here? Interested to see this too.

[Bianchi Dave]

Originally Posted by mattaland

Bianchi Dave - Do you still have that photo of the MW-3's without the lowering springs? Could you share it here? Interested to see this too.

Sure

[Bianchi Dave]

Originally Posted by mattaland

Bianchi Dave - Do you still have that photo of the MW-3's without the lowering springs? Could you share it here? Interested to see this too.

This video is worth a watch too-

[mattaland]

Thank you, that's perfect.

Interesting that the MW-3's raise it by 10mm, and then the lowering springs would probably counteract the new height.

I really love the look of the MW-3's but concerned about ruining the handling / ride height for daily driving on pothole filled roads.

Food for thought, if I'm going to do it I may do it in two phases to see what it's like.

[HeebieJeebies]

There has been a fair number of 795's on here for sale and a few MW3's. I,m sure you're watching the classifieds on here closely

[Bianchi Dave]

Originally Posted by HeebieJeebies

There has been a fair number of 795's on here for sale and a few MW3's. I,m sure you're watching the classifieds on here closely

Not sure if that's aimed at me or mattaland

I've been deliberating for a year, so probably won't do it

[HeebieJeebies]

Originally Posted by Bianchi Dave

Not sure if that's aimed at me or mattaland

I've been deliberating for a year, so probably won't do it

You buddy, but just a reminder to all really that there are some real steals in the forum classifieds

[ahmedb]

Originally Posted by Bianchi Dave

Going to take a lot more than flowers and wine, she's really not amused. Tbf 3k is a lot to spend on wheels I don't need. Still loads of tread on my stock 19 GY tyres, plus the wheels were refinished in black just last summer.

The tread won't wear that quickly either, with having winters on 4-5 months of the year.

That's where the 795s make more sense, as I could sell my current wheels to offset cost - would need to keep them if I bought Motechs to put back on car when selling (although that will be a while I suspect).

There are a few used Motech sets on ebay around the 2k mark though, but she's made her feelings clear on that too! Think I'll trade her in for a more understanding wife 🤔

Re Cotswolds, I've bought a few parts from them, always very competitive.

In no rush but if a set comes up at a price I (OK she) can't refuse I'll be all over them

Did you find some wheels Dave? I have a brand new set of 20" 795M inbound later this week which will be for sale, cheaper than other new sets I believe

[Bianchi Dave]

Originally Posted by ahmedb

Did you find some wheels Dave? I have a brand new set of 20" 795M inbound later this week which will be for sale, cheaper than other new sets I believe

Thanks for the offer, but sticking with 19s

[cramsnik]

Those 795's are nice looking wheels for sure, I know people have fitted them but it's worth having a read through this thread if you're considering for the G21 - https://g20.bimmerpost.com/forums/sh....php?t=1820690

[Bianchi Dave]

Originally Posted by cramsnik

Those 795's are nice looking wheels for sure, I know people have fitted them but it's worth having a read through this thread if you're considering for the G21 - https://g20.bimmerpost.com/forums/showthread.php?t=1820690

Yes, was aware of that issue, which led to me ditching the idea. Plenty folk have fitted them and in all likelihood there would never be a problem, but BMW obviously don't spec them for the G21 for a reason.