[Freestylerfalcon]

Hi friends

I am looking at ordering a dream wheel for my 2020 m340i.
Work Meister m13p.

Looking into sizing, has anyone fitted a set of 19 inch meisters to a g20?
I am unsure of which disk i will need.



19 INCH [STEP RIM] - PCD, Width, Disk Type & Offset
PCD:
5H-100 to 130 [A & O disk only]
5H-112 to 120.65 [L & T disk only]

Width: 19 X 8.0 to 19 X 16.0

Disk Type:
・A disk - Standard brake clearance
・O disk - Small brake clearance with deep rim
・L disk - Big caliper brake clearance
・T disk - Big caliper brake clearance

[GA/\/\/\/\A_CT]

Do they make a wheel with the proper offset?

[Turn Signal]

I would do a lot of emailing. Odds are someone has done the measurements already to ensure the best fit. Start with emailing work themselves.

[JvsonNg]

Did you happen to get sizes for the wheels?

[CaleCro]

Hi, i sent an email regarding WORK Zeast ST1 for my m340ix, and get response that at front if i have bigger brakes i need to choose big brake disc, and at rear to go with mid concave disc.

Im still waiting for replay for which offset to go on 20x8.5 and rear 20x9.5.
I was thinking to go for front ET22 rear ET32...

[JvsonNg]

Any updates on this build? I have been researching and found a website that has a set for the A90 supra but the offsets were a little different

[Freestylerfalcon]

Originally Posted by JvsonNg

Any updates on this build? I have been researching and found a website that has a set for the A90 supra but the offsets were a little different

Got my wheels!

did extensive research and settled on these sizes.
should clear brakes easy and have good fitment.

19x9 +18 t disk
19x10 +36 o disk