Mirror memory

vicfalc09 · 06-16-2019, 12:16 PM

Has anyone had any issues with the passenger side mirror not going back into the memory position. My driver side seems to remember the setting but the passenger side does not.

vicfalc09 · 06-16-2019, 12:41 PM

Quote:

Originally Posted by vicfalc09

Has anyone had any issues with the passenger side mirror not going back into the memory position. My driver side seems to remember the setting but the passenger side does not.

Can someone check and report back. Want to see if I broke something when I swapped my mirror caps.

xraymd · 06-16-2019, 03:27 PM

No issues with mirror memory. I have tilt down on reverse activated.

vicfalc09 · 06-16-2019, 03:29 PM

Quote:

Originally Posted by xraymd

No issues with mirror memory. I have tilt down on reverse activated.

So if you move around the passenger mirror then hit your number 1 setting it goes back to your adjusted setting...

xraymd · 06-16-2019, 11:04 PM

Oh, not that.

The mirror dips down when I reverse. It returns to correct position in drive. This feature is activated with the same switch you use to select which mirror you want to adjust. I’m can’t remember if I have it pushed left or right.

I haven’t tried moving between 1 and 2. I put the mirror where I wanted it at delivery and haven’t moved it. I’ll try tomorrow.

dpod25 · 06-17-2019, 09:35 PM

Quote:

Originally Posted by vicfalc09

Has anyone had any issues with the passenger side mirror not going back into the memory position. My driver side seems to remember the setting but the passenger side does not.

No issue here, it works fine for me. Does your passenger mirror tilt-down when you put the car in reverse? If not, then might be a problem with your motor.

vicfalc09 · 06-18-2019, 07:02 AM

Quote:

Originally Posted by dpod25

Quote:

Originally Posted by vicfalc09

Has anyone had any issues with the passenger side mirror not going back into the memory position. My driver side seems to remember the setting but the passenger side does not.

No issue here, it works fine for me. Does your passenger mirror tilt-down when you put the car in reverse? If not, then might be a problem with your motor.

Yes tilt for reverse works fine. What is not working is pressing the number 1 position and only the passenger side mirror going back into its preset position. Works on driver side but for some reason passenger will not go back.

vicfalc09 · 06-23-2019, 11:32 AM

I replaced the mirror motor with a previous gen 3 series and all functionality is back. I broke the motor when I did the mirror cap install.

Here is the part that work in my G20:

https://rover.ebay.com/rover/0/0/0?m...2F183251745757

Rimefe · 02-25-2020, 07:11 AM

Memory function for both mirrors does not work in my car. Do you think there is a solution that I can do myself?

NoTanks52 · 02-25-2020, 02:03 PM

how do you set the reverse position of the mirror? Just change the setting while in reverse, or is there another way?

Tam the Bam · 02-25-2020, 02:12 PM

Quote:

Originally Posted by NoTanks52

how do you set the reverse position of the mirror? Just change the setting while in reverse, or is there another way?

Is this what you are after? This is for a RHD car it’s the opposite position for LHD.

The switch it refers to is tho switch you use for selecting which mirror you want to adjust.

Name: D39BC30C-48B8-4097-86E5-41DD39F3A31B.jpeg
Views: 1569
Size: 411.7 KB

Name: D39BC30C-48B8-4097-86E5-41DD39F3A31B.jpeg
Views: 1569
Size: 411.7 KB

Name: 9281B856-DB73-4CB4-894D-A28E86062503.jpeg
Views: 1452
Size: 419.3 KB

Cosmico72 · 05-28-2020, 01:52 AM

Hi All,
it seems it is not possible to adjust the tilt for the passenger side mirror in reverse gear, but it goes down at much possible... making the function simply useless (unless for me).

Could someone confirm or better... explain how to set a different position (not with 3rd party software).

I have an X3 G01, I think is the same with other recent model.

Thanks a lot.

Tam the Bam · 05-28-2020, 04:49 AM

Quote:

Originally Posted by Cosmico72

Hi All,
it seems it is not possible to adjust the tilt for the passenger side mirror in reverse gear, but it goes down at much possible... making the function simply useless (unless for me).

Could someone confirm or better... explain how to set a different position (not with 3rd party software).

I have an X3 G01, I think is the same with other recent model.

Thanks a lot.

It can be set using https://bimmercode.app/cars/g20/

There is nothing in iDrive to change this.

hottroc · 06-04-2020, 10:23 AM

I don't have mirror memory, but I seem to be having a similar issue....when I put the car in reverse the passenger mirror view drops as it should but when it reverts to normal driving position it doesn't go back to the same position, its too low, and I have to readjust using the control. Not sure if coding can fix this?

06-16-2019, 12:16 PM	#1
vicfalc09 Second Lieutenant 220 Rep 274 Posts Drives: M340i xDrive Join Date: Feb 2019 Location: New Jersey iTrader: (0)	Mirror memory Has anyone had any issues with the passenger side mirror not going back into the memory position. My driver side seems to remember the setting but the passenger side does not.
	Appreciate 0 Tweet Quote

06-16-2019, 03:27 PM	#3
xraymd Lieutenant 314 Rep 573 Posts Drives: 23 M2, 22 Lincoln Navigator Join Date: Apr 2007 Location: Toledo, OH iTrader: (0)	No issues with mirror memory. I have tilt down on reverse activated.
	Appreciate 0 Quote

06-16-2019, 11:04 PM	#5
xraymd Lieutenant 314 Rep 573 Posts Drives: 23 M2, 22 Lincoln Navigator Join Date: Apr 2007 Location: Toledo, OH iTrader: (0)	Oh, not that. The mirror dips down when I reverse. It returns to correct position in drive. This feature is activated with the same switch you use to select which mirror you want to adjust. I’m can’t remember if I have it pushed left or right. I haven’t tried moving between 1 and 2. I put the mirror where I wanted it at delivery and haven’t moved it. I’ll try tomorrow.
	Appreciate 0 Quote

06-23-2019, 11:32 AM	#8
vicfalc09 Second Lieutenant 220 Rep 274 Posts Drives: M340i xDrive Join Date: Feb 2019 Location: New Jersey iTrader: (0)	I replaced the mirror motor with a previous gen 3 series and all functionality is back. I broke the motor when I did the mirror cap install. Here is the part that work in my G20: https://rover.ebay.com/rover/0/0/0?m...2F183251745757
	Appreciate 2 xraymd314.00 VipinLJ1969.00 Quote

02-25-2020, 07:11 AM	#9
Rimefe Registered 0 Rep 1 Posts Drives: BMW 3.20i 2019 Join Date: Feb 2020 Location: Antalya iTrader: (0)	Memory function for both mirrors does not work in my car. Do you think there is a solution that I can do myself?
	Appreciate 0 Quote

02-25-2020, 02:03 PM	#10
NoTanks52 Private First Class 120 Rep 195 Posts Drives: M340i Join Date: Dec 2019 Location: Los Angeles, CA iTrader: (0)	how do you set the reverse position of the mirror? Just change the setting while in reverse, or is there another way?
	Appreciate 0 Quote

05-28-2020, 01:52 AM	#12
Cosmico72 Registered 0 Rep 1 Posts Drives: X3M Performance Join Date: May 2020 Location: Switzerland iTrader: (0)	Hi All, it seems it is not possible to adjust the tilt for the passenger side mirror in reverse gear, but it goes down at much possible... making the function simply useless (unless for me). Could someone confirm or better... explain how to set a different position (not with 3rd party software). I have an X3 G01, I think is the same with other recent model. Thanks a lot.
	Appreciate 0 Quote

06-04-2020, 10:23 AM	#14
hottroc Second Lieutenant 49 Rep 243 Posts Drives: BMW 330e Join Date: Mar 2020 Location: UK iTrader: (0)	I don't have mirror memory, but I seem to be having a similar issue....when I put the car in reverse the passenger mirror view drops as it should but when it reverts to normal driving position it doesn't go back to the same position, its too low, and I have to readjust using the control. Not sure if coding can fix this?
	Appreciate 0 Quote