[sheddz_]

Originally Posted by peether

Okay thats cleannnnnnn

Thanks. Here’s an updated picture with Eibach Pro Kit lowering springs installed.

MMR 12mm spacers all around.

[peether]

Originally Posted by sheddz_

Thanks. Here’s an updated picture with Eibach Pro Kit lowering springs installed.

MMR 12mm spacers all around.

So sick! I’ve just got my coils installed, getting my wheels put on today with my 10mm spacers in the front! Let’s hope it clears my front coils!

[sheddz_]

Originally Posted by peether

So sick! I’ve just got my coils installed, getting my wheels put on today with my 10mm spacers in the front! Let’s hope it clears my front coils!

Such a nice color! Looks great!

[BandwidthBandanna]

I am looking at 13MM (front) and 15MM (rear) from CTS Turbo. I see I get longer bolts but what if I have wheel locks? Will I lose the wheel lock as it won't be long enough?

[peether]

Originally Posted by BandwidthBandanna

I am looking at 13MM (front) and 15MM (rear) from CTS Turbo. I see I get longer bolts but what if I have wheel locks? Will I lose the wheel lock as it won't be long enough?

Yes. Unless you can find a key lug with the same length bolt.

[peether]

Originally Posted by sheddz_

Such a nice color! Looks great!

Thanks! So far so happy with the new set up!

[BandwidthBandanna]

Originally Posted by peether

Yes. Unless you can find a key lug with the same length bolt.

I was really hoping to have the wheel lock as well. I'll see if I can find longer wheel locks

[sunnyDEE]

2022 M340i xDrive
792M squared
Stock Suspension
15mm spacers front and rear

Took these photos directly after lowering the jack so I'm not sure if the suspension needed to settle or something, but my wheel gap currently isn't as bad as it looks in these photos. Also, the wheels seemed to have tucked in ever so slightly since driving it around.

[Vinra]

Any advice what spacers I will need for this wheels? Also any recommendation on what brand to get? (2021 M340i xDrive). Thank you all in advance.

[Vinra]

[QUOTE=MichaelNRW;29614371]Eibach ProKit (30/25mm)
Eibach Pro-Spacers (15mm)
BMW 898M

Is the spacers all 15mm All around?

[Cayo71]

Originally Posted by sheddz_

MMR 12mm spacers F&R on staggered 791M’s and stock suspension.

Beautiful !!! I have the same car in white. Could you share more pictures at different angles? Also where did you get the front lip?

[Royalte99]

Originally Posted by peelerec

Forgot to share when I had spacers installed 3 weeks ago. Macht Schnell 15mm rear and 12mm in the front.

Looks good! Is your setup 225 squared?

[Royalte99]

Originally Posted by Portimao Blues

I currently have the stock 19" 792M rims on my M340 with the stock Pirelli 225/40/19 tires with 15mm spacers all around, and I agree, it looks perfect!

If you are keeping the same rims and just upgrading to the wider 245/35/19 tires, you shouldn't need any spacers to achieve the same look as your prior set-up. The reason I say this is the 245 tires are .7 inches wider than the 225 tires. A 15mm spacer is .59 inches wide. So you are still wider by .11 inches with the 245 tires and no spacers. Again, this scenario is assuming you are keeping the same rims and just going with the wider 245 tires.

My advice is to install them first without the spacers and see how it looks. You can always add them later. Now if your are changing rims, that's another story due to the offsets.

Do you have any pictures of your setup? I also have 225’s all around and was debating whether to get 15mm spacers all around or a 15mm rear + 12mm front setup

[peelerec]

Originally Posted by Royalte99

Looks good! Is your setup 225 squared?

At that time, yes. It was the factory equipped 225/40/19 Pirelli’s run flats. I also upsized to 235/40/19 PS4S with these same spacers and had no rubbing.

[Royalte99]

Originally Posted by peelerec

At that time, yes. It was the factory equipped 225/40/19 Pirelli’s run flats. I also upsized to 235/40/19 PS4S with these same spacers and had no rubbing.

Interesting, I was thinking about doing the same (going to 235’s). Have you noticed any difference in handling or ride quality with the 235’s on the 8” rims?

[peelerec]

Originally Posted by Royalte99

Interesting, I was thinking about doing the same (going to 235’s). Have you noticed any difference in handling or ride quality with the 235’s on the 8” rims?

Yes, I absolutely recommend upsizing to 235/40/19 on 791M wheels. It is safe and improved handling and comfort.
Previously I had upsized to 245 but felt too much tire flex and was soft steering.

[Mikywosz]

Originally Posted by franky818

H&r springs


Future classic 12mm front 15mm back

Looka awesome!

[edeltoro]

Please help!

Supra wheels 245/35 19x9 +32 285/35 19x10 +40 on nittos, heard some screeching noise was wondering what size spacers would fix it. Rwd with stock adaptive suspension planning on going h&r soon

[Firestorm_BMW]

Just installed some MMR 12mm spacers on my 2021 330i. Wheels are squared stock 19” with 225/40 tires. Really happy with the spacer quality and the results look flush. 12mm is very flush on the fronts. 12mm on the rear sticks out by maybe 1-2mm, but its good.

[SnowBob]

After installing spacers, have you guys noticed rock chips on the body panels?

[Firestorm_BMW]

Originally Posted by SnowBob

After installing spacers, have you guys noticed rock chips on the body panels?

Not yet, but was planning to buy small splash guards. Interested in what others have done as well.

[AM340iMiami]

Only rock chips I got are on my front number. A lot of them.

I have 12mm spacers.