[mediadoctor]

Hello everyone,
I have a BMW G20 CLI and cannot find the SAS3 module, in E-Sys not present.
Can anybody help me?

[den110]

Originally Posted by SimR

These steps should resolve your issue (keep us posted):

- Please make sure vehicle is outside with a great cellular reception before performing the steps below.

- Hold the power button down for 70 seconds exactly. The volume knob is the iDrive power button. It will reboot twice.

- After 70 seconds, release the power button and wait for iDrive to boot up.

- On the iDrive, click "Apps" and then press the “Option” button near the iDrive controller in the center console.

- Choose “Update apps and services”. The vehicle will then undergo a short update.

- Finally, remove the My BMW App from your phone and then reinstall the app.

- Once the update completes, shut the vehicle off and allow a few minutes before restarting the vehicle to check all your apps are there.

Hi

Unfortunately this did not work😒

Might have to code the feature back in. Didn't think the Climate Control Rule should be part of the pay for yearly connected drive features. It is listed in the user manual and never identified as a pay for app.

[palumbo77]

Hello, I have a 2022 bmw G21. Can I turn on the fog lights as welcome lights?

[Tud]

Hey guys,

Quick question: for the g21s that have the base led headlights, can we code the fog lights as cornering lights?


Thank you in advance

[LifeSteaLeR]

Hello, I installed the LCI steering wheel on my 2021 model G22 pre-LCI vehicle. My old steering wheel had heating, this steering wheel has it too, but there are no physical buttons on the new type of steering wheels.

When I researched through ChatGPT, I saw that this could be turned on via the screen or with the voice assistant, and I applied it. But I cannot select the checkbox that appears on the screen, it cannot be activated, is there a way to do this?

[Tommo3]

I have a 2022 G21 with a front radar for driving assist and lots of cameras that seem to do stuff too. It also has a self parking and self reversing function.
I have seen somewhere that the centre part of the instrument cluster can be coded with Bimmercode, using expert mode, to show cars around rather than a map. It seems this does not change the HUD nor the screen in the centre of the dash.
I have found in the idrive that there is a menu, under screens, to show the map which is rubbish but no option for the surrounding vehicle views.
Could someone point me to a guide to do this please?

[Cpatel]

Originally Posted by SimR

It's part of M_VEHICLE stuffs.

To deactivate, code :
HU_MGU -> M_VEHICLE_SP2018_RUEKO -> inaktiv (01)


To activate all M_VEHICLE stuffs, you can code :
DKOMBI4 :
ALPINA_ENABLE -> nicht_aktiv
GLOBAL_LAYOUT_VARIANTE -> m_gmbh
LOGO_SCHRIFTZUG -> m_logo
DZM_ANZ_Y -> benzin_bmw_alpina
DZM_EFF_X -> benzin_bmw_alpina
GESCHWINDIGKEIT_ANZ_Y -> mpa
GESCHWINDIGKEIT_EFF_X -> einsatzfahrzeug
CB_HUD_MVIEW_NAVI -> aktiv
CB_HUD_MVIEW_SLI -> aktiv
CB_HUD_MVIEW_SPORT -> aktiv
CB_HUD_PRESELECT_MVIEW -> aktiv
HMI_MVIEW_ENABLE -> aktiv
HMI_MVIEW_FAHRSTUFE_ENABLE -> gang_1_9
HMI_MVIEW_NAVI_ENABLE -> aktiv
PIA_HUD_MVIEW_NAVIGATION -> aktiv
PIA_HUD_MVIEW_NAVIGATION_PORTIERUNG -> aktiv
PIA_HUD_MVIEW_SLI_NPI -> aktiv
PIA_HUD_MVIEW_SLI_NPI_PORTIERUNG -> aktiv
PIA_HUD_MVIEW_TRACK_NAVI -> aktiv
PIA_HUD_MVIEW_TRACK_NAVI_PORTIERUNG -> aktiv

HU_MGU :
STARTUP_EMBLEM -> bmw_m
MDRIVE -> aktiv
M_VEHICLE -> aktiv
HUD_M -> aktiv
M_DIGITAL_TACHO_EINH -> aktiv
M_SHIFTLIGHTS -> aktiv
M_KOMBI_LINK -> aktiv
M_HUD_LINK -> aktiv
M_EPS -> 2_werte
M_MOTOR -> 2_werte
M_Modus -> 2_werte
M_VEHICLE_SP2018_RUEKO -> aktiv
M_GETRIEBE -> 2_werte
M_BRAKE -> 2_werte

Will this give me the M HUD?
I tried something similar to this before and the HUD doesn’t show the RPM and doesn’t look like the HUD you would see in an M car. It’s the same as before but it doesn’t show RPM.
I’ve gone into the iDrive menu and selected M HUD. Still doesn’t do anything but I don’t think I’ve tried all these settings.

[SleeperBMW69]

My G30 I bought I found out was previously a rental. In that case I was told there are several options that the rental company had turned off and one is the ambient lighting. I s there a way to code it back on I did notice they had even removed a few of the fuses for the ambient lighting. Just trying to get them on not a single one comes on. Thanks

[SimR]

Originally Posted by Cpatel

Will this give me the M HUD?
I tried something similar to this before and the HUD doesn’t show the RPM and doesn’t look like the HUD you would see in an M car. It’s the same as before but it doesn’t show RPM.
I’ve gone into the iDrive menu and selected M HUD. Still doesn’t do anything but I don’t think I’ve tried all these settings.

In my iDrive I have the HUD menu:
Apps menu -> "Vehicle" -> "Displays" -> "Head-up display"

If I select "Automatic" I have the RPM in SPORT mode only. If I select "SPORT" I have the RPM at all times.

Also, if I put the transmission in "Manual" mode, I have a light indicator in the HUD that tells me when to shift...

Do you have this as standard?

HUD Menu in SPORT mode :



If MANUAL shift selected :

[SimR]

Originally Posted by SleeperBMW69

My G30 I bought I found out was previously a rental. In that case I was told there are several options that the rental company had turned off and one is the ambient lighting. I s there a way to code it back on I did notice they had even removed a few of the fuses for the ambient lighting. Just trying to get them on not a single one comes on. Thanks

In HU_MGU, activate this line :
BENENNUNG_DEAKTIVIERUNGSMOEGLICHKEIT_AMBILIGHT -> innenraumbeleuchtung (01)

[SamJunior]

Originally Posted by cyam

Good question. I'd love to replace the water temp with oil temp. I've tried but the best I could do was change the dash to the M version. I love that dash version but the ONE thing that dash doesn't display, which makes it a deal breaker for me, is that it does not display the DEC mode (driving mode) and as I am always switching between Sport and Sport+, I can never tell which mode I am in.

Otherwise that is one solution.

I'd love to find a way to display the driving mode in the M version, that'd make it awesome.

Hi mate,
How can we code the G30 normal cluster to M version?

[cyam]

Originally Posted by SamJunior

Hi mate,
How can we code the G30 normal cluster to M version?

Bimmercode. In the display section you can choose from several.

[SamJunior]

below is what I am looking for my G30 540iX, at least the oil temperature. My assumption is if F90 got it on the same cluster, G30 also can.

[cyam]

Originally Posted by SamJunior

below is what I am looking for my G30 540iX, at least the oil temperature. My assumption is if F90 got it on the same cluster, G30 also can.

This is a G20 forum.

[SamJunior]

SimR has a experience on this topic, therefore I written it here