06-02-2020, 04:17 PM | #23 |
New Member
9
Rep 14
Posts |
I am also wondering what the option "traffic light recognition" actually means (basti)? The appearance of a traffic light (same what I have) or the color with appropriate action, what I am actually looking for? I do not have this menu in the MGU.
Sd_dracula, I just have the "basic" or "passive" functionality which only detects the red traffic light and warns in case of fast approaching it. As the car doesn't give a warning for "green", I am almost sure that are some few parameters to change to upgrade that feature to "active" - autonomous start. I have an older version (came OTA 2019/11-70) |
Appreciate
0
|
08-31-2020, 06:00 AM | #25 |
New Member
5
Rep 23
Posts |
Pulling this up again - after sucessfulling enabling the lane change assistant in my 07/20 g20 I also gave the traffic light assistant a try.
I changed the 4 options in the screenshot on page 1 and also found some more codings in HU_MGU (see attachment) However, it still tries to run through every red light (altough still showing the warning when youre about to run over, but not stopping). I could imagine that there's also a setting in SAS2/3 which we'd have to enable, as it was the same for lane change assistant |
Appreciate
0
|
10-19-2020, 09:34 AM | #26 | |
New Member
7
Rep 10
Posts |
Quote:
|
|
Appreciate
1
mnavis295.50 |
10-19-2020, 01:57 PM | #27 |
First Lieutenant
141
Rep 395
Posts |
Tried enabling these after getting the 03/2020 update from the dealer but still not showing in my menus (traffic light related)
It may be disabled for Ireland or maybe I need 07/2020 update. |
Appreciate
0
|
10-19-2020, 03:49 PM | #28 |
Lieutenant Colonel
1202
Rep 1,587
Posts |
|
Appreciate
0
|
11-17-2020, 09:13 AM | #30 | |
Private
25
Rep 63
Posts |
Quote:
|
|
Appreciate
0
|
11-17-2020, 04:23 PM | #31 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
Was it JTR who remotely coded your car? |
|
Appreciate
0
|
11-18-2020, 06:45 PM | #32 |
Captain
346
Rep 751
Posts |
Oooh, very nice. I can't wait to try out TLR and highway departure next week, thanks for sharing!
|
Appreciate
0
|
12-11-2020, 11:14 PM | #33 | |
New Member
3
Rep 13
Posts |
Quote:
I am driving between Germany and Austria every day. But in Austria, the traffic light assistent doesn't work and even worse, every time i pass the border, I get a warning message I have to dismiss. Remote 3D View also doesn't work if the car is in Austria. I already searched through many modules with e-sys but don't find anything related to "country specific". Does anyone have any idea how to solve this issue? |
|
Appreciate
0
|
12-12-2020, 12:54 AM | #34 | ||
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
https://www.bimmerpost.com/forums/sh...php?p=26990977 |
||
Appreciate
1
Bluebrain3.00 |
12-12-2020, 08:48 PM | #35 | |
New Member
3
Rep 13
Posts |
Great! Thanks a lot.
Quote:
If my car is in Austria and I try to request a Remote 3D view, I get the error message below. See screenshot. Translation: The vehicle is currently in a country where this function is not permitted. Please try again if the vehicle is in a country in which this function is permitted. Please contact customer service for more information. |
|
Appreciate
0
|
12-13-2020, 02:53 AM | #36 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
I'm not saying it's not geolocked, what I'm saying is that the CD features can't be unlocked in coding by changing the land masks. I unlocked aSLA, TLA and RGA by 'cracking' the land masks for those features. They are locally coded on the car and have bitmasks (converted from hex to binary) that determine what features and the extent of those feature, that are allowed for a car based on its geolocation. It's my position that the CD services that rely on geolocation, cannot be unlocked using local car coding, because the decision is made in cloud. That said, I haven't looked for this particular feature, so you're welcome to try, but I suspect you will be out of luck. The R360 feature looks to be activated in 8081\C_XV3D_AVAILABLE_R360 Looks to be a binary on/off with no corresponding land masks that would provide granular enablement across multiple countries. Incidentally, C_XV3D_WATCHDOG_ACTIVE looks interesting... future feature....? Last edited by ifr; 12-13-2020 at 03:17 AM.. Reason: some coding |
|
Appreciate
0
|
12-15-2020, 10:12 PM | #37 |
New Member
3
Rep 13
Posts |
My guess is, such areas are wirelessly transmitted to the car, like the map updates.
There might be many more areas where functions like the cameras are automatically deactivated. A friend with a G20 told me that he was at a Mercedes Test center and as soon as he drove in, a warning popped up that all cameras are deactivated. As the Remote 3D function is routed over the BMW connected drive servers, the blocking might be made there, as the GPS position of the car is requested anyway. Even though Drive Recorder is not available in Austria, it works. I am very happy it does. This is much more important for me. The Remote 3D if more of a gimmick. |
Appreciate
0
|
12-19-2020, 11:58 AM | #38 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
IFR,
I have a '20 M340, currently on software version 07/2020.54 here in US. I saw the spreadsheet you linked above and thought I'd code aSLA & TLA in my car, as well as the other '21 new features. While most of the items appear on the iDrive, none of them work, probably because I ran into several snags: * First off, my car has CAFD 3D78 for DSC_VIP, instead of 3D14; while I was able to find and successfully code C_SLA_ANZEIGE_ZUSATZTEXTE, C_SLA_aSLA_VORHANDEN and C_SLA_aSLA_LAND_AKTIV, I could not find in the CAFD in my car the other three functions. * In coding TLA in the SAS3 ECU, when attempting to code C_SLA_UCC_LAND_AKTIV and C_SLA_aUCC_LAND_AKTIV, I was unable to code the FF:FF:FF:FF value because the SAS3 CAFD had these functions associated with menu values and couldn't change the value * For some of the other '21 features, I encountered the same problem as above when I went to code C_SLA_QMAN_LAND_AKTIV, C_RGA_LAND_AKTIV and C_RGA_SEITENWAHL_LINKS_LANS_AKTIV So, it seems that these functions can't be added to M340 with software 07/2020.54 -- of course, I may have not something properly, but I did double check my work and have been coding for a while Thoughts?
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
0
|
12-19-2020, 04:01 PM | #39 | |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Quote:
2. Don't worry about VIP. Code it if you can 3. You really should be on I-step 11/2020 for this coding |
|
Appreciate
0
|
12-21-2020, 05:44 PM | #40 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
IFR,
Well, I went back and checked my work as well as to code the functions in SAS3 ECU that I had trouble previously. Additionally, I managed to code DSC_VIP functions except one which is not in the CAFD version my car has. All the options show up in iDrive, but neither TLA nor aSLA, nor the other '21 features work. So, either my '20 M340 or US or some other ECU (KAFAS?) is the cause?? Thoughts?
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
0
|
12-21-2020, 05:57 PM | #41 |
Lieutenant Colonel
1202
Rep 1,587
Posts |
Lots of peeps have aSLA working in the US and on the G20 so the good news is it's probably possible, so I'd focus on that first.
I assume you already have 5AU drive assist pro, and have speed limit assistant working manually (have to press set to accept speed limit change) and are just trying to code the auto accept capability? If so then I'd post pics of what you have for the SAS3 land masks in esys |
Appreciate
0
|
12-22-2020, 11:34 AM | #42 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
IFR,
Sorry for the delay, but had a few "honey-dos". Yes, I do have 5AU in my car. Attached are screenshots of all of the affected functions open in SAS3 so you can see their values -- think they are correct
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
0
|
12-22-2020, 01:48 PM | #43 |
Major
659
Rep 1,480
Posts
Drives: 2020 M340Xi (G20)
Join Date: Sep 2013
Location: Virginia
|
IFR,
Also in DSC_VIP (CAFD 3D78, rather than 3D14), I couldn't find C_SLA_VORAUSSCHAU_LAND_AKTIV, but did find C_SLA_VORAUSSCHAU_LAND_AKTIV_ERWEITERT
__________________
Al
2020 M340Xi| ZDA| ZDY| ZPP| ZPX| 1CR| 1PL| 688| 6NW| 2VFH| Retired: 2014 328i BMW CCA |
Appreciate
0
|
12-22-2020, 02:33 PM | #44 |
Lieutenant Colonel
1202
Rep 1,587
Posts |
They look correct to me , I'd need to double check the full list.
When you go into idrive speed assist menu, can you now select automatic for the speed acceptance? Probably easier to back out all other TLA, etc coding for now and focus on just aSLA. Crack that and TLA should follow. Should look like the attached. Last edited by ifr; 12-22-2020 at 02:58 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|