Bimmerpost
3
/
4 Series
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Technical Topics iDrive, Nav, Phone, Audio, Video, Cameras, Electronics G20 Hardwire dashcam

Post Reply
 
Thread Tools Search this Thread
      09-12-2023, 08:09 PM   #133
xnick101
Captain
675
Rep
834
Posts

Drives: 2021 BMW X3 M
Join Date: Oct 2019
Location: Florida

iTrader: (0)

Garage List
2020 BMW M340i  [0.00]
Thanks for the helpful posts, everyone! Just finished installing my Viofo A139 Pro 2 channel I got from Blackboxmycar. I used the fuses as mentioned on page 2 using the Viofo HK3-C Hardwire kit. Works perfectly including the parking mode! I used the T20 bolt that's holding up the glovebox instead of the airbag which is a few inches to the left of that bolt. Still works and don't need to touch the airbag at all.
__________________
2014 BMW 335i M-Sport - SOLD
2020 BMW M340i - SOLD
2021 BMW X3M
Appreciate 0
      09-12-2023, 08:11 PM   #134
xnick101
Captain
675
Rep
834
Posts

Drives: 2021 BMW X3 M
Join Date: Oct 2019
Location: Florida

iTrader: (0)

Garage List
2020 BMW M340i  [0.00]
Quote:
Originally Posted by BimmerLoyal View Post
We’re u ever able to get the a pillar trim to sit more flush with the headliner than it is in ur video ? I notice there’s a gap created by the wiring.
It's a soft material, you just have to kind of massage it out straight. I had the same issue but with some effort I got it back to where it has zero gap.
__________________
2014 BMW 335i M-Sport - SOLD
2020 BMW M340i - SOLD
2021 BMW X3M
Appreciate 0
      11-18-2023, 05:08 PM   #135
CoachTrippleB
Registered
0
Rep
1
Posts

Drives: BMW 3 Series G20
Join Date: Nov 2023
Location: London

iTrader: (0)

Smile Use fuse 74 & 38 on the G20’s fuse box

Quote:
Originally Posted by TTG View Post
Try F46 (or one of the others) as they are for the cigarette lighters.
Gonna jump in here as I just successfully hard wire my VIOFO A129 Pro dash cam to the fuse box located in drivers footwell (right hand drive U.K model)
I tapped into fuse No:74 which protects the USB socket in the car as my ACC accessory connection (10amp mini fuse) then after lots of false hope connections I stumbled across fuse slot No:38 (5amp mini fuse) which was empty on my car but it had power going to it , this I used for my BAT Battery connection which has constant power therefore allowing me to access the ‘Parking Mode ‘ feature on my camera.
I had to purchase the VIOFO HK-3-c hardwire kit as well as mini fuse taps/fuses from Amazon as VIOFO as well as some other companies DO NOT provide the extra parts that in my opinion ought to come in the box. That way newbies like me can have a much smoother easier experience in installing a plug & play gadget.
The hardwire kit for me was essential as it comes with a car battery protector so the cam doesn’t drain my rather expensive car battery.
Been a week now & everything is working fine for me.
Hope this post helps many others ,
Happy driving , peace! ☮️
Appreciate 0
      12-20-2023, 09:26 AM   #136
Kryten2340
New Member
1
Rep
21
Posts

Drives: BMW 116d ED Plus (2015)
Join Date: Jun 2019
Location: United Kingdom

iTrader: (0)

Is it wise to disconnect the battery when fitting both a front and rear dashcam on the G20? I'm due to be installing a Nextbase 522 bundle in the next few days using power from the ODB port.

I did want to purchase the BMW Advanced Eye 3 pro kit but the local dealer would not supply this saying it had to be fitted by themselves. Not sure if its worth the extra £100 for this either as I got the Nextbase bundle (with memory card) and ODB hard wire kit for £225.
Appreciate 0
      12-20-2023, 02:17 PM   #137
chutoy
Second Lieutenant
chutoy's Avatar
United_States
185
Rep
227
Posts

Drives: BMW M440i
Join Date: Mar 2023
Location: New York

iTrader: (0)

Garage List
Quote:
Originally Posted by Kryten2340 View Post
I did want to purchase the BMW Advanced Eye 3 pro kit but the local dealer would not supply this saying it had to be fitted by themselves.
Paddleshifterz sells the Advanced Car Eye
Advanced Car Eye 3.0
Appreciate 0
      01-22-2024, 05:51 PM   #138
marbab
New Member
3
Rep
24
Posts

Drives: BMW 330i G20 2019
Join Date: Jan 2022
Location: UK

iTrader: (0)

Anyone knows what fuses in the boot are "always on" and "on when ignition is on"?
thanks
Appreciate 0
      02-06-2024, 02:44 PM   #139
Pentland
Colonel
2185
Rep
2,592
Posts

Drives: BMW M240i (G42)
Join Date: Jul 2020
Location: UK

iTrader: (0)

Quote:
Originally Posted by marbab View Post
Anyone knows what fuses in the boot are "always on" and "on when ignition is on"?
thanks
The battery is in the boot. Use that as always on.
Appreciate 1
marbab3.00
      03-12-2024, 03:16 PM   #140
Reachg
Registered
0
Rep
1
Posts

Drives: BMW 330i G20 (2020)
Join Date: Mar 2024
Location: CA

iTrader: (0)

I hardwired my Viofo A129 Pro Duo directly to the car battery and rear fuse box. This requires soldering/crimping to extend the hardwire kit.
I used this wire from Amazon:

20AWG UL2464 Power Cable LED Red & Black & Yellow 3 Conductors tinned Copper (2464-20AWG-3C- 25ft)

Red to battery + terminal
Black to battery - terminal
Yellow to fuse tap to Rear fuse box F214

Thanks to previous posters who shared fuse diagrams. I was following the CarEye instructions which didn’t work for the Viofo A129, but all good now that F214 worked.

Good luck!
Attached Images
  
Appreciate 0
      03-23-2024, 10:12 PM   #141
scotes
Enlisted Member
11
Rep
31
Posts

Drives: 2020 M340i
Join Date: Mar 2009
Location: Los Angeles

iTrader: (0)

Plenty of great helpful info here. Am going to use Fuse 59 as ACC for my dash cam but have a question regarding the fuse tap. Which side of the fuse (in the box) is the power side and which is the device side? Want to make sure I am orienting the fuse tap the correct way as it looks like in some of the photos people have them going both ways - which in some cases is incorrect. Thanks!
Appreciate 0
      08-22-2024, 04:17 PM   #142
aci4
Private First Class
56
Rep
188
Posts

Drives: 2020 BMW M340i RWD
Join Date: Jul 2022
Location: Texas

iTrader: (0)

Quote:
Originally Posted by my3ung View Post
Thanks to Joedeejay for the picture and link. Using this information along with countless hours of research and youtube videos, I believe I found the solution that works for my LHD Canada 330i xDrive.

I purchased fuse taps from Amazon
https://www.amazon.ca/gp/product/B078T7JSFD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

My Fuse Assignments are:

*For BATT - Fuse 38 (Empty) - Assigned to NFC Charging
->Slotted a 5A & 3A fuse to the fuse tap.

*For ACC - Fuse 71 - (Occupied) - Assigned to Ambient Lighting
->Slotted the existing 5A fuse and added the 3A fuse to the fuse tap

*For GROUND - Drilled a small hole the size of a #12 bolt into the metal bracket which holds the Airbag (See image). There is a screw and nut which holds one side of the airbag to the bracket, but I discovered you can't take the screw off or get enough space in between to slip the ground wire in. No other metal screws in the vicinity so drilling was my only option.

*Set the limiter to 12.2v

My reasons for going this route. If you can understand fuse taps and which side is the LOAD and DRAW sides then you will have a better understanding of the direction the fuse taps need to be plugged in and which direction the fuses themselves need to be plugged in to prevent blowing the fuses. Since the fuse box presents some slotting challenges, I worked with what was available.

Fuse 38 was empty and only assigned to one item in the car (NFC Charging).
Fuse 71, although occupied, was only assigned to one item in the car (ambient lighting). It also provided enough distance [...]
hey i followed your instructions to hardwire my viofo dashcam in my m340i. the only thing is for the fuse that goes into 38, i only put a fuse tap on the slot furthest away from the prongs, and i plugged it in the direction you had it in the pictures.
also, does it matter which slot the bat/acc cables go into?
Appreciate 0
      08-22-2024, 07:04 PM   #143
darthry
Private
United_States
93
Rep
115
Posts

Drives: 2024 M340i
Join Date: Apr 2024
Location: Michigan

iTrader: (0)

Quote:
Originally Posted by aci4 View Post
hey i followed your instructions to hardwire my viofo dashcam in my m340i. the only thing is for the fuse that goes into 38, i only put a fuse tap on the slot furthest away from the prongs, and i plugged it in the direction you had it in the pictures.
also, does it matter which slot the bat/acc cables go into?
Went through this and had some issues (turned out defective Viofo softwares which I resolved). But in my testing, I managed to try a few fuses and they all checked out fine.

38 has no fuse, and needs no fuse on the top of the fuse tap (so just need the 5A for the dash cam). 38 is live, all the time. So you need to use BATT there if you want to enable parking mode.

71 provides power when ignition is on. ACC must be connected to a fuse that cuts for when the engine is off (well ~10 mins after in our cars).

You could mess around with other fuses (I ended up with 25 for BATT and 59 for ACC). But you want to avoid any critical fuses (airbags, safety, etc)

If yours is up and running as you’d like, I’d leave it alone.
Appreciate 0
      08-22-2024, 07:17 PM   #144
aci4
Private First Class
56
Rep
188
Posts

Drives: 2020 BMW M340i RWD
Join Date: Jul 2022
Location: Texas

iTrader: (0)

Quote:
Originally Posted by darthry View Post
Went through this and had some issues (turned out defective Viofo softwares which I resolved). But in my testing, I managed to try a few fuses and they all checked out fine.

38 has no fuse, and needs no fuse on the top of the fuse tap (so just need the 5A for the dash cam). 38 is live, all the time. So you need to use BATT there if you want to enable parking mode.

71 provides power when ignition is on. ACC must be connected to a fuse that cuts for when the engine is off (well ~10 mins after in our cars).

You could mess around with other fuses (I ended up with 25 for BATT and 59 for ACC). But you want to avoid any critical fuses (airbags, safety, etc)

If yours is up and running as you’d like, I’d leave it alone.
It's currently up and running now. But this is the second A119 V3 pro dashcam i've gone through. My other one somehow bricked and would not turn on anymore. Not sure if it was due to the wiring potentially shorting the dashcam or what. But I got a replacement and it's currently working well (at least for the 2 drives I've been on so far with it lol). I may just double check to make sure the proper wires (acc/bat) are in the right fuses. Other than that I think it should be good.
Appreciate 0
      10-23-2024, 04:11 PM   #145
G203SBM
New Member
7
Rep
22
Posts

Drives: BMW 3 Series G20
Join Date: Jun 2023
Location: Scotland

iTrader: (0)

Is there any positive answer about using the OBD port to power a dashcam?

Some say it will set off the alarm, other say it wont on later models of bmw, other say coding is required, some say it will only set off the alarm if you transmit anything other than power etc?
Appreciate 0
      10-23-2024, 04:21 PM   #146
Kr-m422
Private
Kr-m422's Avatar
29
Rep
72
Posts

Drives: M340d Touring
Join Date: Mar 2022
Location: UK

iTrader: (0)

I have an M340d with the Garmin constant power OBD adapter/cable running a Garmin Mini 3 (front) and Garmin Mini 2 (rear).

Adapter set to run parking mode for 12 hours after locking car. Been running for 3 weeks now and had no alarms or battery warnings etc.
Appreciate 0
      10-23-2024, 04:25 PM   #147
G203SBM
New Member
7
Rep
22
Posts

Drives: BMW 3 Series G20
Join Date: Jun 2023
Location: Scotland

iTrader: (0)

Thanks for your reply Kr-m422 much appreciated
Appreciate 0
      10-25-2024, 04:29 PM   #148
G203SBM
New Member
7
Rep
22
Posts

Drives: BMW 3 Series G20
Join Date: Jun 2023
Location: Scotland

iTrader: (0)

Quote:
Originally Posted by Kr-m422 View Post
I have an M340d with the Garmin constant power OBD adapter/cable running a Garmin Mini 3 (front) and Garmin Mini 2 (rear).

Adapter set to run parking mode for 12 hours after locking car. Been running for 3 weeks now and had no alarms or battery warnings etc.
Got the OBD cable for dashcam plugged in and all working fine
Appreciate 0
      10-25-2024, 05:31 PM   #149
Kr-m422
Private
Kr-m422's Avatar
29
Rep
72
Posts

Drives: M340d Touring
Join Date: Mar 2022
Location: UK

iTrader: (0)

Quote:
Originally Posted by G203SBM View Post
Got the OBD cable for dashcam plugged in and all working fine
Good stuff!
Appreciate 0
      10-26-2024, 02:21 PM   #150
scotes
Enlisted Member
11
Rep
31
Posts

Drives: 2020 M340i
Join Date: Mar 2009
Location: Los Angeles

iTrader: (0)

Quote:
Originally Posted by G203SBM View Post
Is there any positive answer about using the OBD port to power a dashcam?

Some say it will set off the alarm, other say it wont on later models of bmw, other say coding is required, some say it will only set off the alarm if you transmit anything other than power etc?
I had grabbed a cheapy OBD port power adapter and used it for a while but just didn't feel right about it. Kinda like plugging in a mysterious USB connector not know if it's doing something else... The Garmin noted here is I'm sure decent quality and safer to go with if you're going to run one.

I eneded up connecting into fuse 59 but have an odd situation where if auto start/stop is on and the car turns off the power to that fuse turns off. Car starts, power returns. If I turn off auto s/s, which I always do (damn you Bimmercode for not figuring out the fix! ), then no problems. Anyone else have this problem or did I perhaps tap into the wrong fuse?
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:26 PM.




g20
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST