[Technic]

Originally Posted by slim25073

Hi,

I have a mid ram system with a matchup 7up amp and the match 1.7 ram harness. I bought an external ASD module. Is there a harness that I can use to connect to the RAM and ASD module? Or do I need to create my own? My car doesn’t have ASD enabled in the RAM, hence the external module to set it up independently and transfer sound to the RAM and then to the amp.

Look forward to any feedback or anyone who attempted this setup?

There is no ASD module in a RAM system - it cannot be retrofitted.

[slim25073]

Thank you, where can I get the pin assignment for a RAM-MID version? Also the pin assignment for a ASD module part number: 65125A3FCF7?

[slim25073]

Hi All, I have successfully retrofitted ASD external module to a RAM system, took lots of research and managed to succeed. PM me you need assistance to get this setup enabled.

Btw it sounds AMAZING

[mrpingu]

Originally Posted by Encanto

The UP channel assignments are fixed to the harness pin assignments:

-Channel A/B = Front speakers
-Channel C/D = Rear speakers
-Channel F/G = Woofers
-Channel E = Center

The UP 7BMW and the UP 7DSP are the same units, the difference is the 7BMW has its 12+ and ground connections in the same Molex 20-pin connector as its inputs and outputs, the 7DSP has its 12V and ground in a separate connector and not in the Molex. The 7BMW can also be powered by the 12V and ground in the separate connector.

If you got a 7BMW for your F30 HiFi and now you get a G20 HiFi then you can install the 7BMW in the G20 HiFi as long as you use the new G20 RAM harness and the 2ch add-on module.

Input sensitivity is also different on both units.

[DRD_G20]

Originally Posted by karmacore

Hello guys, what is the difference between 8dsp standard and 8dsp MEC ?
I mean, is the standard version enough for a gG21 HiFi system ?

https://www.audiotec-fischer.de/en/m...ifiers/up-8dsp

The standard one is just fine, it has enough inputs to cover the hifi system