[GD1981]

So just got my car back from autocouture and loving the subtle mods.
-Dinan Springs
-Wheel Spacers
-Trunk spoiler
-Front spoiler

[njfoses]

What mm spacers?

[chenry]

Looking good! Congrats

[GD1981]

front 10mm
rear 12.5mm

If I had to do it again, I’d go with 12.5mm all around. But as is, makes a difference - for the better of course.

[GD1981]

Here’s a 360 vid:

[LVm340i]

did you use the handling kit from
dinan as well?

[GD1981]

Originally Posted by LVm340i

did you use the handling kit from
dinan as well?

Yes I did

[DG20]

I ordered the Dinan springs based on your pics. Your car looks way lower than others that I've seen with these springs. Do you have adaptive suspension?

[GD1981]

Originally Posted by DG20

I ordered the Dinan springs based on your pics. Your car looks way lower than others that I've seen with these springs. Do you have adaptive suspension?

You know, I was thinking the same thing - that my car looks a bit lower than what others have posted. That said, I absolutely love the drop, its just right IMO.

No I have the static suspension.

Edit: If you go with wheel spacers, as a suggestion, for the fronts, go with 12-13mm. I went with a 10mm originally, and they’re still not quite flush and a bit tucked in. I have since ordered 12.5mm to go along with the existing 12.5mm in the rear.

[Rodan]

where did you get the front lip?

[GD1981]

Originally Posted by Rodan

where did you get the front lip?

https://www.amazon.com/dp/B083FCVZ7H...ing=UTF8&psc=1

[Rodan]

Thanks! Looks good. Should have asked about the spoiler too - looks like they match well

[GD1981]

Yea man - I’ve gotten a lot of compliments on the whole setup, subtle yet very effective.

Here is the link to the spoiler:

https://www.ebay.com/itm/Fits-19-21-...-/283658424520

[purplehearttags]

Originally Posted by GD1981

front 10mm
rear 12.5mm

If I had to do it again, I’d go with 12.5mm all around. But as is, makes a difference - for the better of course.

What are your thoughts on 15mm in front and in rear I'm on h&r lowering springs

[R12ax7]

Did you need extended bolts with the spacers or were the stock ones long enough?

[GD1981]

Originally Posted by purplehearttags

What are your thoughts on 15mm in front and in rear I'm on h&r lowering springs

Are you running stock staggered? 15mm in the rear will probably poke out a bit, 15mm in the front shouldnt. Im running 12.5mm all around and the rears are pretty much flush and the front is still not quite flush, close though. I guess it all depends what look you’re going for.

Personally, I love my setup as it is now - I maybe couldve gone 13mm in the front, but thats me being really picky. The rear is perfect for me.

[GD1981]

Originally Posted by R12ax7

Did you need extended bolts with the spacers or were the stock ones long enough?

Yes, I went with ECS tuning - they came with extended bolts. That said, whatever spacers you go with, anything 5-6mm + its highly advisable to go with extended bolts.

[Rodan]

Originally Posted by GD1981

Yes, I went with ECS tuning - they came with extended bolts. That said, whatever spacers you go with, anything 5-6mm + its highly advisable to go with extended bolts.

Sorry for all the questions - but I've always wondered this for the people who use spacers. What do you do if you need longer bolts but you still want to have wheel locks? Can you get wheel locks with the correct length and specs?

[GD1981]

Originally Posted by Rodan

Sorry for all the questions - but I've always wondered this for the people who use spacers. What do you do if you need longer bolts but you still want to have wheel locks? Can you get wheel locks with the correct length and specs?

Yea, not sure about the wheel lock concern. But all I can say is, I would never drive around with 10+mm spacers and stock lug bolts.