[PARTS@STBMW]

Congratulations!

[BlackShadowKiwi]

Originally Posted by zachart

- go into Expert Mode in KOMBI ECU
- search for each parameter (there is a search box)
- change
- Code
CB_FZG_UMGEBUNG_FAS: aktiv (01)
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
PIA_FZG_UMGEBUNG_FAS: aktiv (01)
SICHT_ABSICHT_ENABLE: aktiv (01)

This is the guide I followed - I didn't have a PIA_FZG parameter so I only changed the three things and it still works for me.

I tried this, and found the PIA_ one, but it bombed out and I had to restore. Any suggestions?

Thanks in advance

[murderedg20]

Originally Posted by BlackShadowKiwi

I tried this, and found the PIA_ one, but it bombed out and I had to restore. Any suggestions?

Thanks in advance

I would just not use the PIA. It worked for me without it. I don't really know what I'm doing when it comes to coding though that's just what worked for me.

[BlackShadowKiwi]

Originally Posted by zachart

I would just not use the PIA. It worked for me without it. I don't really know what I'm doing when it comes to coding though that's just what worked for me.

Thanks, ended up doing it again without the PIA and worked fine