[cowymo]

Just wondering if the North American style tail light has the same hardware as Euro style for 2021 G22. Is it possible to code the signal to be the tiny line instead of blinking the braking light itself.

[Fast400]

The hardware ie Tail lights are not the same. Coding alone doesn't work.

[larrylam646]

Originally Posted by cowymo

Is it possible to code the signal to be the tiny line instead of blinking the braking light itself.

If the G22 design philosophy is the same as that of the G20, it may be possible.

I was able to code the EU taillight behaviour (separate the brake from turn signal) in my NA M340iX tail lights before installing the EU tail lights.

https://g20.bimmerpost.com/forums/sh...3&postcount=70

[UnknownBeing]

Originally Posted by larrylam646

If the G22 design philosophy is the same as that of the G20, it may be possible.

I was able to code the EU taillight behaviour (separate the brake from turn signal) in my NA M340iX tail lights before installing the EU tail lights.

https://g20.bimmerpost.com/forums/sh...3&postcount=70

What values needed to be changed?

[maximking]

yes can be coded , only the small red ones for turn signals without the brake lights .

[larrylam646]

Originally Posted by UnknownBeing

What values needed to be changed?

For your M340i?

Please read through the thread I linked to in my previous post.

FYI, I used Tokenmaster 3.7Launcher/Esys when I uncovered and coded the EU tail light functionality for my vehicle.

The actual parameter names and values may differ depending on which Launcher/version (TM, EsysX, EsysPlus...) is used, as I discovered from reading other member's posts in this thread.

[UnknownBeing]

Originally Posted by larrylam646

For your M340i?

Please read through the thread I linked to in my previous post.

FYI, I used Tokenmaster 3.7Launcher/Esys when I uncovered and coded the EU tail light functionality for my vehicle.

The actual parameter names and values may differ depending on which Launcher/version (TM, EsysX, EsysPlus...) is used, as I discovered from reading other member's posts in this thread.

It linked to a single post so I didn’t see the thread. I see them now! Thanks!

[greekcs]

Also, to get the rear fog working will require additional wiring and a new headlight switch.

[cowymo]

Originally Posted by maximking

yes can be coded , only the small red ones for turn signals without the brake lights .

Are you able to provide the parameters for the coding?? Thx

[Hyura]

Unfortunely the hardware is different for 4 series. For the G22/82/83 tail lights, the red section is always on and we are missing a seperate thin red section that is present for 3 series. You would need new hardware and wiring to seperate the brake lights.

[cowymo]

Originally Posted by Hyura

Unfortunely the hardware is different for 4 series. For the G22/82/83 tail lights, the red section is always on and we are missing a seperate thin red section that is present for 3 series. You would need new hardware and wiring to seperate the brake lights.

What a bummer. Its so sad to know that BMW actually made different tail lights for N.A. models..

[Calvindubois]

Originally Posted by cowymo

What a bummer. Its so sad to know that BMW actually made different tail lights for N.A. models..

Only thing missing is rear fog, and amber turn signals. If you VO code the rear taillights to be ECE, then they will work very similar. Small red line on bottom of taillights work as blinkers now without using the brake lights.

[cowymo]

Originally Posted by Calvindubois

Only thing missing is rear fog, and amber turn signals. If you VO code the rear taillights to be ECE, then they will work very similar. Small red line on bottom of taillights work as blinkers now without using the brake lights.

That is what i am trying to achieve. But looks like the light housing is missing the physical signal strip.

[GOLDPHO3NIX]

Originally Posted by cowymo

That is what i am trying to achieve. But looks like the light housing is missing the physical signal strip.

Sad. I wasn’t able to get it to work on m440i tails