03-01-2022, 09:55 PM | #23 |
Enlisted Member
47
Rep 44
Posts |
|
Appreciate
0
|
03-02-2022, 09:24 AM | #25 |
Private
42
Rep 50
Posts |
They provided round exhaust clamps, but as you know, we have oval pipes. I used plumbing clamps until I can get to an exhaust shop for assistance. I got these tips off eBay, but they are not powder-coated with brackets as shown in their pictures. They arrived as steel, burnished black with round clamps. I did not pay the full asking price (wow, $300+ now!). Even so, I don't think they are worth much more than $200, excluding shipping. With the proper fit (these are pretty good) and volume production, these should easily go for under $200, then add a choice for finish (gloss black, powder-coating, etc). These are fine for a daily driver. They stick out a little further than I like, but I'd have to cut off some of the slant tip from the stock pipe otherwise. I'm not cutting anything at this time. For show cars, look elsewhere, or get the Dinan axle-back.
Seller shipped out of China and package sat in HK for several days. https://www.ebay.com/itm/363495653022
__________________
Last edited by FastXTC; 04-02-2022 at 08:06 PM.. |
Appreciate
2
Insane435480.50 TheCrespiEffect4.50 |
03-02-2022, 11:32 AM | #26 |
Private
101
Rep 84
Posts
Drives: G35, Tahoe, 22 M340 xdrive
Join Date: Feb 2022
Location: SC
|
Will they fit an M Performance exhaust tips?
|
Appreciate
0
|
03-31-2022, 12:02 PM | #27 |
New Member
4
Rep 25
Posts
Drives: 2020 BMW M340i XDrive
Join Date: Jun 2020
Location: New York
|
wondering the same, currently have an mpe and looking for a diffuser but almost every diffuser requires quad tips. someone mentioned these: https://bimmerplug.com/products/m-pe...42216519794939 but also said they won’t fit on g20 mpe so i’m not sure anymore.
|
Appreciate
1
G35TOG20100.50 |
03-31-2022, 02:17 PM | #28 |
Major
481
Rep 1,468
Posts |
There is another thread about this in the B58 engine section.
I bought these tips: https://www.aliexpress.com/item/1005...21ef1802DOWtQb I have received them and they fit over the factory pipes but the bolts they provide are not long enough. I am trying source bolts that will work. I am not a huge fan of the attachment method but I think it will be ok with the right bolts. It comes with that oval shape. the top and bottom us pretty snug but the sides are quite a bit larger than factory hence the need for longer bolts than supplied. stay tuned. EDIT: I have returned these tips as they are no where close to fitting properly. The oval is way too big and the bolts do not make good contact with the factory pipe. Even with longer ones, they just dont seat flat.
__________________
2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18
2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85 Last edited by Insane435; 04-04-2022 at 07:50 AM.. |
Appreciate
0
|
03-31-2022, 02:19 PM | #29 | |
Major
481
Rep 1,468
Posts |
Quote:
__________________
2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18
2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85 |
|
Appreciate
0
|
07-05-2022, 02:43 PM | #31 |
New Member
5
Rep 11
Posts
Drives: 2022 BMW M340 Xdrive
Join Date: Apr 2022
Location: Allen, TX
|
Where did you find those? I'm at the point where I'm almost willing to just go to an exhaust shop and have them weld on some generic quads to make them fight right and not worry about finding "compatible" ones.
|
Appreciate
1
HeatJoey1222.50 |
07-05-2022, 03:50 PM | #32 |
Enlisted Member
47
Rep 44
Posts |
compatible tips have been found, see this thread:
M340 quad exhaust https://g20.bimmerpost.com/forums/sh....php?t=1659619 I have these on my car now. |
Appreciate
0
|
11-18-2023, 09:45 PM | #33 |
New Member
0
Rep 13
Posts
Drives: 2017 x5 2019 x3 2020 m340
Join Date: Oct 2023
Location: Nj
|
The top pic looks better
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|