M340 quad exhaust

Insane435 · 03-09-2022, 09:53 AM

did anyone receive their Aliexpress quad tips yet to check fitment?

Bboys1982 · 03-09-2022, 10:20 PM

Yes!!! I finally got mine yesterday and installed them

Bboys1982 · 03-09-2022, 10:50 PM

Here is the picture

Rednose_M340i · 03-09-2022, 10:56 PM

Looking good.

What dimensions did u give to the seller?

squareforce · 03-10-2022, 12:00 AM

Quote:

Originally Posted by Bboys1982

Here is the picture

Looks really good. Were you able to keep the active part of the exhaust? Are the tips centered?

When I tried getting quads welded the tech said it would take a lot of custom fab to make it center and I'd lose the active exhaust

Bboys1982 · 03-10-2022, 06:21 AM

Quote:

Originally Posted by Rednose_M340i

Looking good.

What dimensions did u give to the seller?

Seller has added M340i as custom option for order. Simply picked that one

Bboys1982 · 03-10-2022, 06:25 AM

Quote:

Originally Posted by squareforce

Looks really good. Were you able to keep the active part of the exhaust? Are the tips centered?

When I tried getting quads welded the tech said it would take a lot of custom fab to make it center and I'd lose the active exhaust

Absolutely no custom fab or anything. It Simply goes over car’s exhaust pipe and then with 4 screws you can tighten it up in its place. Mine took less than 45min in my garage to install

No change to anything from car’s exhaust features

Bboys1982 · 03-10-2022, 06:28 AM

It requires no fab work. Although I ended up changing these scrws with more regular ones, so I can adjust them easier and tighten them with regular socket

CATBB1 · 03-10-2022, 08:33 AM

Looks really nice...

Insane435 · 03-10-2022, 10:11 AM

I have just ordered mine! I will now search for a more aggressive diffuser. Ill post pictures once I receive and install them.

G35TOG20 · 03-10-2022, 10:21 AM

Will it fit an MPE exhaust?

RichieDirts · 03-10-2022, 11:47 PM

Quote:

Originally Posted by Bboys1982

It requires no fab work. Although I ended up changing these scrws with more regular ones, so I can adjust them easier and tighten them with regular socket

Great find!!! Quick question. What bolts did you replace originals with to make it easier?? Thanks in advance

Bboys1982 · 03-12-2022, 07:38 AM

Quote:

Originally Posted by RichieDirts

Great find!!! Quick question. What bolts did you replace originals with to make it easier?? Thanks in advance

Original ones are a bit hard to work with. I changes them with these regular ones. For side ones, I went with 2” tall bolts to make sure they properly contact side of exhaust pipe. 1” bolts were used for bottom. It was tightened enough that I didn’t need anything for top bolt

Rednose_M340i · 03-13-2022, 02:01 PM

Quote:

Originally Posted by Bboys1982

Quote:

Originally Posted by Rednose_M340i

Looking good.

What dimensions did u give to the seller?

Seller has added M340i as custom option for order. Simply picked that one

I just ordered the exhaust tips modified for the M340i.

Thanks man

Will post some pictures too the moment I receive them.

RawDog · 03-13-2022, 02:15 PM

Quote:

Originally Posted by Insane435

I have just ordered mine! I will now search for a more aggressive diffuser. Ill post pictures once I receive and install them.

Where’s everyone buying their diffusers from? And are they perfect fitment? Been trying to find one.. most websites selling these alibaba ones for like 800$… criminal to say the least.

Insane435 · 03-13-2022, 04:24 PM

Quote:

Originally Posted by AlaskanAlien

Where’s everyone buying their diffusers from? And are they perfect fitment? Been trying to find one.. most websites selling these alibaba ones for like 800$… criminal to say the least.

I bought the carbon akasaka diffuser on aliexpress for $200 shipped. The tips are also on ali for about $230 shipped.

RawDog · 03-13-2022, 04:32 PM

Quote:

Originally Posted by Insane435

I bought the carbon akasaka diffuser on aliexpress for $200 shipped. The tips are also on ali for about $230 shipped.

Have any pics?

BayM340 · 03-16-2022, 04:56 PM

Quote:

Originally Posted by G35TOG20

Will it fit an MPE exhaust?

I sent them a message to see if they have any for the MPE, or if they can custom make some.

xnick101 · 03-16-2022, 06:33 PM

Bboys1982 Is it possible to install the tips further onto the exhaust so they are more flush with the diffuser? Or is there a limit of how far they go back?

TruthOne · 03-16-2022, 06:41 PM

These still stick out too far like the Dinan tips. I really do not like that. They should be flush with the bumper and not pultrude like that IMO. I may just order the Black version of the stock tips and call it a day.

G35TOG20 · 03-16-2022, 06:50 PM

Quote:

Originally Posted by G35TOG20

Will it fit an MPE exhaust?

I sent them a message to see if they have any for the MPE, or if they can custom make some.

Thank you.

totalone · 03-16-2022, 08:27 PM

Quote:

Originally Posted by Bboys1982

Here is the picture

Looking really sharp.
Do you think this will fit m440 g26?

I am new to bmw all together have no idea is anything is compatible

03-09-2022, 09:53 AM	#111
Insane435 Major 481 Rep 1,468 Posts Drives: 435ix M Sport EWG Join Date: Jul 2016 Location: Michigan iTrader: (1)	did anyone receive their Aliexpress quad tips yet to check fitment? __________________ 2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18 2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85
	Appreciate 0 Quote

03-09-2022, 10:20 PM	#112
Bboys1982 New Member 48 Rep 18 Posts Drives: 2020 BWM M340i Join Date: Jan 2022 Location: Ottawa iTrader: (0)	Yes!!! I finally got mine yesterday and installed them
	Appreciate 0 Quote

03-09-2022, 10:50 PM	#113
Bboys1982 New Member 48 Rep 18 Posts Drives: 2020 BWM M340i Join Date: Jan 2022 Location: Ottawa iTrader: (0)	Here is the picture Attached Images
	Appreciate 7 Punkwrock118.50 M340iLaurent25.50 csctiscalia16.50 xnick101651.50 squareforce234.00 Rocket455493.50 fuxxo139.50 Quote

03-09-2022, 10:56 PM	#114
Rednose_M340i Private 67 Rep 55 Posts Drives: BMW M340i Join Date: Jan 2020 Location: Belgium iTrader: (0)	Looking good. What dimensions did u give to the seller?
	Appreciate 0 Quote

03-10-2022, 06:28 AM	#118
Bboys1982 New Member 48 Rep 18 Posts Drives: 2020 BWM M340i Join Date: Jan 2022 Location: Ottawa iTrader: (0)	It requires no fab work. Although I ended up changing these scrws with more regular ones, so I can adjust them easier and tighten them with regular socket Attached Images
	Appreciate 6 Insane435480.50 jpowers36218.00 csctiscalia16.50 Charlie (Wessex)290.50 Rocket455493.50 fuxxo139.50 Quote

03-10-2022, 08:33 AM	#119
CATBB1 Private First Class 48 Rep 107 Posts Drives: BMW M340i Join Date: Jan 2022 Location: Monroeville, Pa iTrader: (0)	Looks really nice...
	Appreciate 0 Quote

03-10-2022, 10:11 AM	#120
Insane435 Major 481 Rep 1,468 Posts Drives: 435ix M Sport EWG Join Date: Jul 2016 Location: Michigan iTrader: (1)	I have just ordered mine! I will now search for a more aggressive diffuser. Ill post pictures once I receive and install them. __________________ 2014 EBII 435ix - Stage 2+ Dragy: 0-60 3.61; 60-130 10.18 2020 MG M340ix - Dragy: 0-60 3.48 2018 LBB X4M40i - Stock Dragy: 0-60 4.85
	Appreciate 0 Quote

03-10-2022, 10:21 AM	#121
G35TOG20 Private 101 Rep 84 Posts Drives: G35, Tahoe, 22 M340 xdrive Join Date: Feb 2022 Location: SC iTrader: (0) Garage List 06 Infiniti G35 ... [0.00]	Will it fit an MPE exhaust?
	Appreciate 0 Quote

03-16-2022, 06:33 PM	#129
xnick101 Captain 652 Rep 820 Posts Drives: 2021 BMW X3 M Join Date: Oct 2019 Location: Florida iTrader: (0) Garage List 2020 BMW M340i [0.00]	Bboys1982 Is it possible to install the tips further onto the exhaust so they are more flush with the diffuser? Or is there a limit of how far they go back? __________________ 2014 BMW 335i M-Sport - SOLD 2020 BMW M340i - SOLD 2021 BMW X3M
	Appreciate 0 Quote

03-16-2022, 06:41 PM	#130
TruthOne Major 1081 Rep 1,086 Posts Drives: 2021 M340i Join Date: Oct 2020 Location: Oakland, CA iTrader: (0)	These still stick out too far like the Dinan tips. I really do not like that. They should be flush with the bumper and not pultrude like that IMO. I may just order the Black version of the stock tips and call it a day.
	Appreciate 0 Quote