03-28-2024, 11:17 AM | #1 |
New Member
0
Rep 5
Posts |
Alloy wheels - lacquer peeling?
Hi all,
Looking for opinions on the following: Bought a 2020 330e recently, and have noticed that the lacquer on the alloys are peeling off - at least I think it's the lacquer. Where it is not peeling, it is smooth to the touch, and where it is peeling, it is slightly rough. Causing quite a bit of discolouration where the peeling is occurring as well (it is not surface dirt, tried wiping it away). Anyone have experience dealing with this, or how much it would cost, roughly, to repair? Is it a big job or can it be done DIY? |
03-28-2024, 11:33 AM | #2 |
Private First Class
58
Rep 160
Posts |
You can try and DIY it. I followed the guide at https://f30.bimmerpost.com/forums/sh....php?t=1348407 to repair some minor scuffs on mine. It's not 100% perfect but it's also much cheaper than getting them diamond cut which would be about £100 per wheel.
|
Appreciate
0
|
03-28-2024, 12:36 PM | #3 |
Captain
283
Rep 797
Posts |
Looks like a previous owner has done a DIY repair on some damage to the rim. These wheels are very susceptible to this type of damage, and it is possible to sand it out and relacquer - but clearly the new coat of lacquer has a limited life span, and dirt is getting under it.
__________________
Current: 21 G21 330e | Portimao Blue | 791 M | M Sport Pro | Vis/Tech/Comfort Plus packs
Previously: 19 F20 M140i Shadow Edition | EB II || 16 F31 340i | EB II || 13 F31 330d Luxury | MG |
Appreciate
0
|
03-29-2024, 02:18 AM | #4 |
Private
28
Rep 98
Posts |
I 've had a couple,e of wheels on others BMWs replaced under warranty due to lacquer issues. But this was areas that went a pearly white colour and bubbled slightly. The dealer though did use a paint thickness measurement device to check the wheels hadn't been refinished.
I think I agree with above, looks like a previous repair failing. |
Appreciate
0
|
04-01-2024, 12:20 PM | #7 |
Captain
206
Rep 624
Posts |
This was the place
https://maps.app.goo.gl/VyBAjMcxUaxQsgXq8 It's probably worth mentioning they used paint instead of recutting the wheel but they came out well and in some ways paint seems like a more maintainable setup. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|