[Mr.G20 M340]

Hello,

I have had the car for a month and I'm very new to the AWD world and don't want to ruin the car and got an opportunity to team up with an awesome company for wheels, I can't wait to show you guys. But anywho, I'm going with 20" wheels and wanted to know what dimensions I can run on the wheels and tires? Is 8.5/9.5 okay? I wish I could run 9.5 all around. Also what tire sizes can I go with?

[Preciseyyc]

You can run anything you want. As long as diameter front to back is the same.
I'll be running 20 x8.5 with 255/30/20 and 20x10.5 with 295/25/20

[Asterix]

Originally Posted by Preciseyyc

You can run anything you want. As long as diameter front to back is the same.
I'll be running 20 x8.5 with 255/30/20 and 20x10.5 with 295/25/20

That's beefy , what ET do you have for the rims ? No rubbing

[Preciseyyc]

Originally Posted by Asterix

That's beefy , what ET do you have for the rims ? No rubbing

I honestly can't remember the specs. They're on order currently. But we spent about 2 weeks going over specs and doing measurements so it'll be perfect fitment with around 1mm of wheel metal poking out but with the tire size they'll be within the wheel wells

[Asterix]

Originally Posted by Preciseyyc

I honestly can't remember the specs. They're on order currently. But we spent about 2 weeks going over specs and doing measurements so it'll be perfect fitment with around 1mm of wheel metal poking out but with the tire size they'll be within the wheel wells

Would appreciate if you can share when you have the wheels .
In the front 255 ? no limitation of turning angle ?

[Preciseyyc]

Originally Posted by Asterix

Would appreciate if you can share when you have the wheels .
In the front 255 ? no limitation of turning angle ?

No with test fitting that we did with spacers and such there's none.
From memory we did 12ish mm more aggressive than the stock 437m front and back. Doing work vsxx so our specs also allowed for the extra bit of lip work uses on their wheels versus cheap wheels.