[srbs73]

Originally Posted by Fpgiuliano

what mean "CatC"?

i wanted to test the codes provided by ifr to srbs73 (to adapt the route without navi) but even looking on google i could not understand what "catc" means

thanks

I think it was the value for C_SWA_Auspraegung. Mine was already set to USA so didn’t change it.

[Fpgiuliano]

Originally Posted by srbs73

I think it was the value for C_SWA_Auspraegung. Mine was already set to USA so didn’t change it.

Thanks for reply srbs73
I imagine that I will found catc living in Italy
I will try in the weekend

Do u found significant changes with this parameters?

[srbs73]

Originally Posted by Fpgiuliano

Thanks for reply srbs73
I imagine that I will found catc living in Italy
I will try in the weekend

Do u found significant changes with this parameters?

I haven’t really had chance to look at it with lockdown. IFR said it made the lane change performance worse so didn’t see it as a priority.

When I’ve tested lane change previously, I’ve found it to be about right, positive but not too aggressive.

[ifr]

Originally Posted by Fpgiuliano

Thanks for reply srbs73
I imagine that I will found catc living in Italy
I will try in the weekend

Do u found significant changes with this parameters?

If yours is set to category_c then change to USA, otherwise leave it as is

[Fpgiuliano]

Originally Posted by ifr

If yours is set to category_c then change to USA, otherwise leave it as is

Ok I will do this, thanks
For curiosity, does it work better by setting usa or only works with usa?

[ifr]

Originally Posted by Fpgiuliano

Ok I will do this, thanks
For curiosity, does it work better by setting usa or only works with usa?

Works way better set to USA

[Fpgiuliano]

Originally Posted by ifr

Try the following codes. Allows auto adapt to route without nav running (acknowledges then slows for bends, slows if you indicate to turn off etc) and improves the lane change assistant if you are using cat_C


HU_MGU:
ADAS_2DH_HORIZON_EXTENSION aktiv [01]
ADAS_OUTPUT_LANE_POS aktiv [01]

SAS3:
EM_AdasIntegration_AdasExtendedPdu enabled [01]
EM_ElectronicHorizon_MostProbablePathBending kParameterSet01 [01]
C_SWA_Auspraegung Nr001_Variante_USA

DSC_VIP:
EM_ElectronicHorizon_MostProbablePathBending kParameterSet01
EM_AdasIntegration_AdasExtendedPdu ENABLED

hi, i don't have in my dsc_vip this parameter EM_AdasIntegration_AdasExtendedPdu (on firmware 03.2021.30)

is normal?

[srbs73]

Originally Posted by Fpgiuliano

hi, i don't have in my dsc_vip this parameter EM_AdasIntegration_AdasExtendedPdu (on firmware 03.2021.30)

is normal?

I’m still on 11/2020 and it was there for me under CAFD_3D78.

[Fpgiuliano]

Originally Posted by srbs73

I’m still on 11/2020 and it was there for me under CAFD_3D78.

I verified again and in cafd_3D78 is not present em_adasintegration_adasextendedPdu

[KRS72UK]

I noticed yesterday that my recent oil and filter change data in the i drive is missing. My app states this was carried out and the next service is due in x thousand miles. Just been to the dealer and they say it is on their system but not in the car! Advised it may be a “glitch” and the data may resolve it self! I updated some weeks ago and have just found this issue as i was looking for some other data.

Has anyone else had this happen/notice service data missing?

[Blackers]

Is 11/2020.50 the latest version?

[xenon]

Originally Posted by Blackers

Is 11/2020.50 the latest version?

No. The latest OTA is 11/2020.57 but there are later versions from dealer updates which haven’t gone out as OTA yet.

[Blackers]

Originally Posted by xenon

No. The latest OTA is 11/2020.57 but there are later versions from dealer updates which haven't gone out as OTA yet.

Thanks Zenon, having gone from 2019 to 07/2020.54 on Saturday to 11/2020.50 today I was keen to see if I was suddenly up to date

[falbi]

I received the update a few days ago and noticed non existent burbles in sport + and issues with auto start and start ventilation from app...anyone else

[Talisman77]

Originally Posted by falbi

I received the update a few days ago and noticed non existent burbles in sport + and issues with auto start and start ventilation from app...anyone else

Try factory reset now you have the OTA. Fwiw I still have what I consider pops/burbles on mine (updated to 11/2020.50).

[Rikvdb]

Received a notice on the my bmw app today, downloaded & pushed it to the car and went without any issues. After 20min up and running. Great experience

[falbi]

Talisman77 how do I do a factory reset.

Thanks

[Talisman77]

Originally Posted by falbi

Talisman77 how do I do a factory reset.

Thanks

Car -> General Settings -> Factory reset (or similar verbiage, it's one of the options at the bottom). It'll give you the usual warnings about all your configuration etc being erased as it will be as if it had just rolled off the line again, but it is known to fix things after doing an OTA. For example I had one where suddenly the settings for auto steering wheel heat just disappeared completely, which factory reset fixed.

Naturally you'll need the patience to setup everything else

[falbi]

Originally Posted by Talisman77

Car -> General Settings -> Factory reset (or similar verbiage, it's one of the options at the bottom). It'll give you the usual warnings about all your configuration etc being erased as it will be as if it had just rolled off the line again, but it is known to fix things after doing an OTA. For example I had one where suddenly the settings for auto steering wheel heat just disappeared completely, which factory reset fixed.

Naturally you'll need the patience to setup everything else

Thanks 77 appreciate it.

[Froggie401]

Update to 11/2020.57 and all my journey data has been reset to today including my individual and ex-works MPG etc.

Any way to get this info back???

[sharepointalex]

Took my car into the dealers the other day for some warranty work and managed to get them to update it.

Now on 03/2021 and I’m sad to report…the HUD sport display bug is still there!! So frustrating 😢

I haven’t noticed anything new with the update so maybe just some other bug fixes.

There is some talk over another German BMW forum about 03/2021 changing the cold start on the M340i so it sounds quieter. I think this might be true, mine sounds like it may be but it might just be a placebo effect. If it has changed, it hasn’t changed much.

[Fpgiuliano]

Originally Posted by sharepointalex

Took my car into the dealers the other day for some warranty work and managed to get them to update it.

Now on 03/2021 and I’m sad to report…the HUD sport display bug is still there!! So frustrating 😢

Ad suggested by ifr (the magician of
Bmw) you need to change this parameters to have new HUD of My21

CB_HUD_FAS: nicht_aktiv [00]
CB_HUD_LIST_AUS: aktiv [01]
CB_HUD_LIST_AUTOMATISCH: aktiv [01]
CB_HUD_LIST_FAS_PERMANENT: aktiv [01]
CB_HUD_LIST_SPORT_AUS: nicht_aktiv [00]
CB_HUD_LIST_SPORT_FES: nicht_aktiv [00]