[BennyDunks]

I was hoping to stop some of the dirt that my side skirts appear to pick up!

[BennyDunks]

Anyones else's instructions says they are for an E38 7 series :

[BennyDunks]

Never fear, they fit really nice!

[Charlie (Wessex)]

Hmmm. Not sure the splash guards really stop that much

[BennyDunks]

Originally Posted by Charlie (Wessex)

Hmmm. Not sure the splash guards really stop that much

Jesus you been off-roading 😂

[Charlie (Wessex)]

BennyDunks that was a 330 miler - probably the M6 responsible for all that sh*t and boy was it stuck on.

[HeebieJeebies]

Just had a service done and they’ve apparently did the recall re the new type pins, even with my flaps on......

[a.summers86]

For anyone interested attached is the old rivet vs the new rivet for the recall on the wheel arch lining.

New rivet is a lot bigger and requires a rivet gun to fix in position. Old one is the simple push type. Part number on the bag if anyone needs any in the future. I've now got 10 spare at least if I ever need to take the mud guards off.

[thescouselander]

Just got a set of these off ebay and was thinking about installing them. I was wondering if they might rub against the paintwork and damage it. How securely held are these thing when they're on - could they move at all when in use? I was thinking maybe a but of protection film might be needed where the edges touch the paintwork.

[a.summers86]

Originally Posted by thescouselander

Just got a set of these off ebay and was thinking about installing them. I was wondering if they might rub against the paintwork and damage it. How securely held are these thing when they're on - could they move at all when in use? I was thinking maybe a but of protection film might be needed where the edges touch the paintwork.

No movement on mine whatsoever.

You would be hard pressed to not assume they were oem.

[LimavadyG21]

Hi folks

Is anyone able to confirm if the mud flaps will fit the LCI G21 ?

I wouldn't have thought there would be any difference in bodyshape at the point of contact , but then again 🤷*♂️

[Bianchi Dave]

Thread resurrection to ask a query about these, which was already mentioned by thescouselander.

I recall my OEM F31 mudflaps had a double sided foam tape (with red backing so likely 3M or similar) around the trailing vertical edge of the flap, presumably to stop them moving once fitted and rubbing on the paintwork.

Do these ebay or Amazon flaps have this? I'm sure Toolstation do a similar narrow foam tape so I'd probably use that if they come with nothing fitted

[a.summers86]

Originally Posted by Bianchi Dave

Thread resurrection to ask a query about these, which was already mentioned by thescouselander.

I recall my OEM F31 mudflaps had a double sided foam tape (with red backing so likely 3M or similar) around the trailing vertical edge of the flap, presumably to stop them moving once fitted and rubbing on the paintwork.

Do these ebay or Amazon flaps have this? I'm sure Toolstation do a similar narrow foam tape so I'd probably use that if they come with nothing fitted

They don’t have any tape etc fitted to them. Would be easy enough to retrofit thought.

[Bianchi Dave]

Originally Posted by a.summers86

They don’t have any tape etc fitted to them. Would be easy enough to retrofit thought.

Thanks for confirming 👍