[pdxdbo]

Here's the AFE filter compared to a Mahle

[pdxdbo]

Added a JB+ tuner while I was under the hood, looking forward to getting some seat time in with it.

[pdxdbo]

Window tint and a wash made for a good Saturday

[1WickedE90]

Originally Posted by pdxdbo

Window tint and a wash made for a good Saturday

Looks good, what percentage & brand/model of tint?

[pdxdbo]

Originally Posted by 1WickedE90

Looks good, what percentage & brand/model of tint?

Kavaca 20% carbon film

[pdxdbo]

Added the euro spec emergency triangle, courtesy the fine folks at getbmwparts.com

Before & after:

[pdxdbo]

Swapped out the front reflectors for the paint matched counterparts thanks to the team at IND Distribution

Before & after:

[pdxdbo]

The tint shop sent me a couple before & after photos

[pdxdbo]

Converted to Motorsport Hardware studs and racing lug nuts to accommodate VAC Motorsports 12mm spacers, all from the guys over at Kies Motorsports. Really happy with the stud conversion and the way the wheels are flush with the fenders now.

[pdxdbo]

Before & after

[Bmoney2K4]

Very nice and tasteful, the 330i is very underrated performance-wise in my opinion.

[pdxdbo]

Put together a lil addition to the HK system. The install was pretty straightforward thanks to the TechnicsPNP harness and LOC. Sundown 1k amp and 12in subs in a vented enclosure tuned to 32hz courtesy Down4Sound.

[pdxdbo]

Quick test fit of the OEM G80 black spoiler that just landed

[pdxdbo]

Disassembled the Sundown remote gain knob enclosure and flush mounted the inner components in the blank center console panel.

[pdxdbo]

Pretty happy with the result

Edit: If I was to do it over again, I'd align the indicator lights North/South instead of East/West so the clip light was easier to see. I may purchase a new blank panel and go with this alignment at some point.

[pdxdbo]

Added some Lumin-X film to the fog lights but butchered the headlight film so I'll have it installed by the pros

[pdxdbo]

Excited to see my roundels in production, this is actually the final run of roundels by NRW as they've ceased production to focus on other work.

[pdxdbo]

The longest part of installing this takeoff G80 spoiler was removing the prior adhesive. Once that was out of the way the rest was easy.

[pdxdbo]

Really dig this look

[pdxdbo]

The profile is aggressive but not too much

[VipinLJ]

Originally Posted by pdxdbo

Added some Lumin-X film to the fog lights but butchered the headlight film so I'll have it installed by the pros

Love the yellow fog lamps. Wish my car had fog lamps so I could do the same!

[pdxdbo]

Originally Posted by VipinLJ

Love the yellow fog lamps. Wish my car had fog lamps so I could do the same!

Thanks, I really wish I could've found the more highlighter yellow color that the M8 GTE has for it's headlight & fog lights.