ESYS G20 coding - getting started

ring0r · 05-11-2021, 12:26 AM

Hey shawn

Can i get the last files?

thx in advance

shawnsheridan · 05-11-2021, 06:10 AM

Quote:

Originally Posted by Andy3661

Hi Shawn

Please can you send me v.4.29.11?

Thanks

It's 4.29.22 now. PM sent.

shawnsheridan · 05-11-2021, 06:16 AM

Quote:

Originally Posted by 35MGR

I have 2021 bmw g20 320i and I want to code launch control and sport transmission bimmercode don't show this options. I don't know how to set up and use esys can anyone help me ?

Quote:

Originally Posted by zazzau

Hi Sawn — do you mind sharing ESYS & Token & Launcher & PSDZDATA? If possible I'll need instructions/getting started to get this working with the latest update.

2021 M340i.

Appreciate

Quote:

Originally Posted by ring0r

Hey shawn

Can i get the last files?

thx in advance

PM's sent.

up2up · 05-11-2021, 06:17 PM

Hi Shawn

could you please share the latest cheats file, psdzdata and esys . i have esysx as launcher.

Thank you

shawnsheridan · 05-11-2021, 07:18 PM

Quote:

Originally Posted by up2up

Hi Shawn

could you please share the latest cheats file, psdzdata and esys . i have esysx as launcher.

Thank you

PM sent.

zazzau · 05-12-2021, 12:58 AM

Thanks for sharing Shawn. Got your PM!

It is worth mentioning here that others have reported sucess coding all the modules for anti-dazzle with bimmercode in expert mode. I was getting this primarily to code this feature but I'm going to try bimmercode first before I spend a lot of money on Esysx.

MM2 · 05-15-2021, 07:40 AM

Hi Shawn — do you mind sharing ESYS & Token & Launcher & PSDZDATA cheat sheets etc If possible
Much appreciated

shawnsheridan · 05-15-2021, 10:46 AM

Quote:

Originally Posted by zazzau

Thanks for sharing Shawn. Got your PM!

It is worth mentioning here that others have reported sucess coding all the modules for anti-dazzle with bimmercode in expert mode. I was getting this primarily to code this feature but I'm going to try bimmercode first before I spend a lot of money on Esysx.

Depending on car, free Launcher PRO 2.8.2 may work so E-SysX would not be needed.

shawnsheridan · 05-15-2021, 10:47 AM

Quote:

Originally Posted by Abarth695

Hi Shawn — do you mind sharing ESYS & Token & Launcher & PSDZDATA cheat sheets etc If possible
Much appreciated

PM sent.

MM2 · 05-15-2021, 10:44 PM

Thanks Shawn
A question if I may.
Is my understanding correct that I only need launcher pro for loading and using the cheat sheets? If I only want to and become more skilled at changing a code directly, I don’t need Launcher Pro?
Kind regards
Angelo��

shawnsheridan · 05-15-2021, 11:17 PM

Quote:

Originally Posted by Abarth695

Thanks Shawn
A question if I may.
Is my understanding correct that I only need launcher pro for loading and using the cheat sheets? If I only want to and become more skilled at changing a code directly, I don’t need Launcher Pro?
Kind regards
Angelo��

Launcher PRO needed for all FDL Coding, which is via Cheat Sheet or direct. It is not needed for VO Coding or Flashing.

MMnut · 05-16-2021, 05:10 PM

Hi Shawn , would mind sharing latest esys & Token & Launcher & PSDZDATA cheat sheets etc if possible. I have older version and now no longer working.

Many thanks

rico25 · 05-16-2021, 05:21 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by rickkap

Hi Shawn

Please can you please send me the current psdzdata lite.

Thank you for all your help

Rick

PM sent.

Hey Shawn, can send me the latest psdzdata please, got my car back from the dealership but they updated it. thanks

shawnsheridan · 05-16-2021, 07:11 PM

Quote:

Originally Posted by MMnut

Hi Shawn , would mind sharing latest esys & Token & Launcher & PSDZDATA cheat sheets etc if possible. I have older version and now no longer working.

Many thanks

Quote:

Originally Posted by rico25

Hey Shawn, can send me the latest psdzdata please, got my car back from the dealership but they updated it. thanks

PM's sent.

senjian.zhou · 05-16-2021, 10:52 PM

Thank you for sharing.

Keyse611 · 05-19-2021, 09:55 AM

Hi shawn,

Can you send me the latest files?
Thanks in advance!

shawnsheridan · 05-19-2021, 10:03 AM

Quote:

Originally Posted by Keyse611

Hi shawn,

Can you send me the latest files?
Thanks in advance!

Your Receive PM function is disabled. PM me when working.

mierzwin · 05-23-2021, 01:31 PM

Hey. Can you share latest files, please?

shawnsheridan · 05-23-2021, 01:50 PM

Quote:

Originally Posted by mierzwin

Hey. Can you share latest files, please?

PM sent.

Andy3661 · 05-23-2021, 02:29 PM

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Hi Shawn

Please can you send me v.4.29.11?

Thanks

LP 2.8.2, or even 3.7 Pro for that matter, does not have recent mappings for psdzdata 4.29.x, which is needed for i-step 03/2021.x

You will need to buy esysx or bimmercode for ADV

Thanks.

I have Bimmercode with expert mode, will that work to code lane change assist and assisted driving view?

It won't work for lane change assistant but you can vo code that with esys alone, no need for a launcher.
Just remove 8TR from fa, then vo code hu_mgu, sas and bdc (7083).

I know a little about adv coding

but don't use bc. That said, I believe bc can be used to modify dkombi which is the only ECU that adv is configured from.

Lane change assistant is way better than adv.

Thank for the info.

I'm new to coding and struggling if I'm honest.

I'm only looking to code lane change assist and you previously mentioned I can do this with esys and without launcher.

Before I spend a fortune on esysx which I have been advised to do I wondered if you could detail the steps for esys alone?

Any help is much appreciated.

ifr · 05-23-2021, 03:23 PM

Quote:

Originally Posted by Andy3661

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Hi Shawn

Please can you send me v.4.29.11?

Thanks

LP 2.8.2, or even 3.7 Pro for that matter, does not have recent mappings for psdzdata 4.29.x, which is needed for i-step 03/2021.x

You will need to buy esysx or bimmercode for ADV

Thanks.

I have Bimmercode with expert mode, will that work to code lane change assist and assisted driving view?

It won't work for lane change assistant but you can vo code that with esys alone, no need for a launcher.
Just remove 8TR from fa, then vo code hu_mgu, sas and bdc (7083).

I know a little about adv coding

but don't use bc. That said, I believe bc can be used to modify dkombi which is the only ECU that adv is configured from.

Lane change assistant is way better than adv.

Thank for the info.

I'm new to coding and struggling if I'm honest.

I'm only looking to code lane change assist and you previously mentioned I can do this with esys and without launcher.

Before I spend a fortune on esysx which I have been advised to do I wondered if you could detail the steps for esys alone?

Any help is much appreciated.

Yeah you don't need esysx for that. Just use esys alone- don't start launcher pro at all.

I must have done some instructions for this before at some point. At a high level you remove 8TR from your FA, then VO code hu_mgu, sas and bdc (7083).

I'll put something together tomorrow unless someone wants to jump in

zazzau · 05-23-2021, 06:07 PM

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Andy3661

Hi Shawn

Please can you send me v.4.29.11?

Thanks

LP 2.8.2, or even 3.7 Pro for that matter, does not have recent mappings for psdzdata 4.29.x, which is needed for i-step 03/2021.x

You will need to buy esysx or bimmercode for ADV

Thanks.

I have Bimmercode with expert mode, will that work to code lane change assist and assisted driving view?

It won't work for lane change assistant but you can vo code that with esys alone, no need for a launcher.
Just remove 8TR from fa, then vo code hu_mgu, sas and bdc (7083).

I know a little about adv coding

but don't use bc. That said, I believe bc can be used to modify dkombi which is the only ECU that adv is configured from.

Lane change assistant is way better than adv.

Thank for the info.

I'm new to coding and struggling if I'm honest.

I'm only looking to code lane change assist and you previously mentioned I can do this with esys and without launcher.

Before I spend a fortune on esysx which I have been advised to do I wondered if you could detail the steps for esys alone?

Any help is much appreciated.

Yeah you don't need esysx for that. Just use esys alone- don't start launcher pro at all.

I must have done some instructions for this before at some point. At a high level you remove 8TR from your FA, then VO code hu_mgu, sas and bdc (7083).

I'll put something together tomorrow unless someone wasn't to jump in

You probably don't want to write VCM

05-11-2021, 12:26 AM	#705
ring0r Private 101 Rep 72 Posts Drives: G20 330i Join Date: Oct 2016 Location: Frankfurt am Main iTrader: (0)	Hey shawn Can i get the last files? thx in advance
	Appreciate 0 Quote

05-11-2021, 06:17 PM	#708
up2up New Member 5 Rep 29 Posts Drives: X5M 2019 Join Date: May 2020 Location: RUH iTrader: (0)	Hi Shawn could you please share the latest cheats file, psdzdata and esys . i have esysx as launcher. Thank you __________________ Abdol (X5m, 2019)
	Appreciate 0 Quote

05-12-2021, 12:58 AM	#710
zazzau Lieutenant Colonel 755 Rep 1,777 Posts Drives: 2021 M340i XDrive Join Date: Mar 2021 Location: Earth iTrader: (0)	Thanks for sharing Shawn. Got your PM! It is worth mentioning here that others have reported sucess coding all the modules for anti-dazzle with bimmercode in expert mode. I was getting this primarily to code this feature but I'm going to try bimmercode first before I spend a lot of money on Esysx.
	Appreciate 0 Quote

05-15-2021, 07:40 AM	#711
MM2 Private 0 Rep 51 Posts Drives: M2 G87 Join Date: Mar 2021 Location: Gold Coast iTrader: (0) Garage List 2024 M2 [0.00]	Hi Shawn — do you mind sharing ESYS & Token & Launcher & PSDZDATA cheat sheets etc If possible Much appreciated
	Appreciate 0 Quote

05-15-2021, 10:44 PM	#714
MM2 Private 0 Rep 51 Posts Drives: M2 G87 Join Date: Mar 2021 Location: Gold Coast iTrader: (0) Garage List 2024 M2 [0.00]	Thanks Shawn A question if I may. Is my understanding correct that I only need launcher pro for loading and using the cheat sheets? If I only want to and become more skilled at changing a code directly, I don’t need Launcher Pro? Kind regards Angelo��
	Appreciate 0 Quote

05-16-2021, 05:10 PM	#716
MMnut First Lieutenant 470 Rep 338 Posts Drives: M4 Join Date: May 2021 Location: AU iTrader: (0)	Hi Shawn , would mind sharing latest esys & Token & Launcher & PSDZDATA cheat sheets etc if possible. I have older version and now no longer working. Many thanks
	Appreciate 0 Quote

05-16-2021, 10:52 PM	#719
senjian.zhou New Member 2 Rep 7 Posts Drives: g20 Join Date: May 2021 Location: Hong Kong iTrader: (0)	Thank you for sharing.
	Appreciate 0 Quote

05-19-2021, 09:55 AM	#720
Keyse611 New Member 2 Rep 5 Posts Drives: 430i Join Date: May 2021 Location: Spain iTrader: (0)	Hi shawn, Can you send me the latest files? Thanks in advance!
	Appreciate 0 Quote

05-23-2021, 01:31 PM	#722
mierzwin Private 16 Rep 65 Posts Drives: E90 330i Join Date: Dec 2011 Location: London iTrader: (1)	Hey. Can you share latest files, please?
	Appreciate 0 Quote