[shawnsheridan]

Originally Posted by maximking

I would recommend Esys Plus 3.9 much better then cracked launchers of TM ,sold on internet

It's Chinese though. Is the English translation / interface good?

[zazzau]

Originally Posted by maximking

I would recommend Esys Plus 3.9 much better then cracked launchers of TM ,sold on internet

What's much better about it? I got the same Launcher Pro from davyg and it works great. As long as it gets the job done really shouldn't matter - unless there's something about the Chinese version you are referring to that is exceptional.

[pt0x]

shawnsheridan sigh... so sorry to bother you with this, you must be going mad... Can I also grab a copy of the latest data files? very much appreciated

[shawnsheridan]

Originally Posted by pt0x

shawnsheridan sigh... so sorry to bother you with this, you must be going mad... Can I also grab a copy of the latest data files? very much appreciated

PM sent.

[maximking]

Works perfect , english transalation is correct

[maximking]

Originally Posted by zazzau

What's much better about it? I got the same Launcher Pro from davyg and it works great. As long as it gets the job done really shouldn't matter - unless there's something about the Chinese version you are referring to that is exceptional.

Ncd comparison tool inside , reboot ecu inside with 1 click ,read DTC s and much more that even EsysX copied their features

[BlueOnBlue]

Originally Posted by zazzau

Sounds like you'll have to recode. Never seen this kind of problem before. Typically an update does clear your FDL coding. But seeing that you have issues with Esysx I'll wait to fix that and then check the CAFD values for each of those ECUs

So i went through and did it all again today

Once I plugged in and read the ECU , it did indeed show the CAFD values were back to original, not sure why the 1st time I read it they showed the changed values.

Either way, took me about 30 minutes of changing the coding and using the cheat codes where available, and managed to code both the anti-dazzle and tesla mode back in

does anyone happen to remember where to go to set the 'mode' on start up? similar setting to ASS where I want it in sport individual on start up each time, not comfort

[BlaSTiWi]

Try...

Change startup mode to Adaptive 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >0A<
Change startup mode to Sport 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >01<
Change startup mode to Sport Individual 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >03<
Change startup mode to Comfort (default) 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >04<
Change startup mode to Eco Pro 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >07<
Change startup mode to Eco Pro Individual 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >09<

Originally Posted by BlueOnBlue

So i went through and did it all again today

Once I plugged in and read the ECU , it did indeed show the CAFD values were back to original, not sure why the 1st time I read it they showed the changed values.

Either way, took me about 30 minutes of changing the coding and using the cheat codes where available, and managed to code both the anti-dazzle and tesla mode back in

does anyone happen to remember where to go to set the 'mode' on start up? similar setting to ASS where I want it in sport individual on start up each time, not comfort

[MM2]

hi Shawn
Sorry to bother you but am confused.
I downloaded latest files and the full files are in RAR and about 37 individual files.
I cannot see where in esys x that i put these files as they look nothing like what is stored in the pszd file there. Is the RAR download correct or is the file to be downloaded in a different manner and then replace the pszd file there?
Thankyou

[shawnsheridan]

Originally Posted by Abarth695

hi Shawn
Sorry to bother you but am confused.
I downloaded latest files and the full files are in RAR and about 37 individual files.
I cannot see where in esys x that i put these files as they look nothing like what is stored in the pszd file there. Is the RAR download correct or is the file to be downloaded in a different manner and then replace the pszd file there?
Thankyou

Put all 37 .rar parts in same folder. Open only part1.rar using latest WinRAR or 7-Zip and Extract psdzdata folder from the archive. Replace psdzdata folder in c:\data with new extracted one.

[BlaSTiWi]

Is it possible to enable Assisted Driver View and/or Automatic Lane Change Assistant on a car w/o Active Driver Assistant Pro option?

Tkx!

[zazzau]

Originally Posted by BlaSTiWi

Is it possible to enable Assisted Driver View and/or Automatic Lane Change Assistant on a car w/o Active Driver Assistant Pro option?

Tkx!

Depending on the packages you have, you'll need the hardware for those features to work.

[BlueOnBlue]

Originally Posted by BlaSTiWi

Try...

Change startup mode to Adaptive 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >0A<
Change startup mode to Sport 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >01<
Change startup mode to Sport Individual 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >03<
Change startup mode to Comfort (default) 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >04<
Change startup mode to Eco Pro 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >07<
Change startup mode to Eco Pro Individual 00007083 BDC_BODY3 3221 FesPiaDefaultLastUserMode 11111111b >09<

Thanks my friend

I found the correct entries, but the only options that show up when editing the CAFD file are EcoPro, Comfort, and 2 Hybrid options

I believe last time I did this I had to find the part that details what options show up in that menu, but i wasn't able to do it this time

Any idea where that is? Otherwise I'm not able to select sportindividual in that menu

Thanks!

--

Specifically these are the choices, but I only see 2 listed here, and 2 not listed Not sure how to pick 03 (Sport Individual) without it appearing in the list under DefaultLastUserMode



ECU: BDC_BODY3/00007083
​​FDL: FesPiaDefaultLastUserMode to value 02 for Sport Pro/Plus mode

​​Complete set of FesPiaDefaultLastUserMode codes are listed here. The mode needs to be enabled on the car for these to work:
​​01 - Sport
​​02 - Sport Pro/Plus
​​03 - Sport Individual
​​04 - Comfort
​​05 - Comfort Plus
​​06 - Comfort Individual
​​07 - Eco
​​08 - Eco Plus
​​09 - Eco Individual
​​0A - Adaptive

[BlaSTiWi]

Strange mine listed all, I adjusted to Sport Individual yesterday after on Adaptive for a few days from the deafult Comfort... but your SI option shows up in iDrive?

PS: ... wait maybe edit the Werte value instead of the drop down selection?

Originally Posted by BlueOnBlue

Thanks my friend

I found the correct entries, but the only options that show up when editing the CAFD file are EcoPro, Comfort, and 2 Hybrid options

I believe last time I did this I had to find the part that details what options show up in that menu, but i wasn't able to do it this time

Any idea where that is? Otherwise I'm not able to select sportindividual in that menu

Thanks!

[BlueOnBlue]

Originally Posted by BlaSTiWi

Strange mine listed all, I adjusted to Sport Individual yesterday after on Adaptive for a few days from the deafult Comfort... but your SI option shows up in iDrive?

PS: ... wait maybe edit the Werte value instead of the drop down selection?

i tried that, how do you edit the werte value?

i input 03, but when i clicked away it wouldn't save it, I must be missing something obvious there!

[BlaSTiWi]

At the bottom box where you input "03" there's little save icon on the far right side on the bar of that box.

Originally Posted by BlueOnBlue

i tried that, how do you edit the werte value?

i input 03, but when i clicked away it wouldn't save it, I must be missing something obvious there!

[BlueOnBlue]

Originally Posted by BlaSTiWi

At the bottom box where you input "03" there's little save icon on the far right side on the bar of that box.

that was it thank you, sometimes the interface is a little hard to see/remember where everything is unless you use it day in day out

that's great i managed to code everything I wanted to from last time

until the next software update! lol

[aidbar2]

Hello,

How I can contact with dayvg?
I want to buy from him latest Launcher Pro

https://www.bimmerfest.com/members/dayvg.437094/

Thank you very much!

[shawnsheridan]

Originally Posted by aidbar2

Hello,

How I can contact with dayvg?
I want to buy from him latest Launcher Pro

https://www.bimmerfest.com/members/dayvg.437094/

Thank you very much!

PM sent.

[calllka]

Originally Posted by shawnsheridan

Should work just fine.

I don't get any errors, but the settings just don't transfer to the car. After I edit the setting, save, and press Code, everything goes fine, no alerts. But if I read data and look at it again, the settings are back to default.

I'm using E-Sys 3.27.1 and v.4.31.41_PSdZData with TokenMaster's Laundher Pro 3.7.0.315

Anything you can think of I can try?

[shawnsheridan]

Originally Posted by calllka

I don't get any errors, but the settings just don't transfer to the car. After I edit the setting, save, and press Code, everything goes fine, no alerts. But if I read data and look at it again, the settings are back to default.

I'm using E-Sys 3.27.1 and v.4.31.41_PSdZData with TokenMaster's Laundher Pro 3.7.0.315

Anything you can think of I can try?

Press Code FDL, not Code.

[calllka]

Originally Posted by shawnsheridan

Press Code FDL, not Code.

Thank you so much, that did the trick