[Carbon dude]

Hi,

I have used 3m vhd tape and it looks like it bonded well. However the edges are ever so slightly not flush, about 1-2 mm out. Me being the perfectionist I want it flush.

I was thinking of masking off the car around the edges and applying a small amount of beta link to make it flush. I would apply I very sparingly with a thin enough object just to dab it under the gap, such as a sowing needle.

Question is, is there any other recommendations other than beta link?

Thanks

[blaz]

Meanwhile have you made any corresponding difference to the front aero?

Mr M Performance expains in one video how important that is but there is no science in the description of the parts - just optimising downforce or complementing the sporty appearance....

Anyway - hope you get sorted. Looking forward to pictures.

[Mattyk]

Mine moves on the tape and has lifted slightly at one end, it’s not designed for taping down, I just can’t bring myself to take off and either retape or betalink

[OM3RTA]

Originally Posted by Gary1985

Hi,

I have used 3m vhd tape and it looks like it bonded well. However the edges are ever so slightly not flush, about 1-2 mm out. Me being the perfectionist I want it flush.

I was thinking of masking off the car around the edges and applying a small amount of beta link to make it flush. I would apply I very sparingly with a thin enough object just to dab it under the gap, such as a sowing needle.

Question is, is there any other recommendations other than beta link?

Thanks

Betalink is your best bet imo I have some for my still-to-be-installed spoiler and are going down the same route as you, ie VHB for the inner and Betalink for the outer edges.

[Carbon dude]

Thanks for the replies folks. May go with betalink or tigerseal for the edges.

Already given the spoiler a shake (still has masking tape on in place) and it's solid.