[18BMWX5M]

Has anyone figured out how to code the lane change assistant to change lanes on regular roads and not just the highways like the OP said?

[siegester]

Mine works on any multi-lane road IIRC

[larrylam646]

Originally Posted by 18BMWX5M

Has anyone figured out how to code the lane change assistant to change lanes on regular roads and not just the highways like the OP said?

I found this parameter but have not yet tested:
SAS3--> C_NHA_Spurwechsel_Strassentyp--> Nr001_Alle_Strassen

Larry

[RSnic]

Mine works on not only highways, but also on regular multi-level roads-- no problem

[ifr]

Originally Posted by larrylam646

I found this parameter but have not yet tested:
SAS3--> C_NHA_Spurwechsel_Strassentyp--> Nr001_Alle_Strassen

Larry

That only allows the emergency stop assistant (not halt assistant) to work on any road, not LCA

[BlueOnBlue]

Hi folks

Just finished coding via bimmercode, to enable the dash display.

Works just fine, even have the option turned on for 'lane change assist' in the settings now, but obviously it doesn't work because of the SAS module being uncoded to allow it

Again I used bimmercode in expert mode to enable all the dash functions, and now my question;

I also have the coding cable and Esys software , and when I tried to do that route for coding discovered because I don't have the 3.0 launcher (my understanding is the author has stopped responding to people trying to buy the software) , so all I get when I load the existing 'free' launcher is a load of nonsense I can't understand

From my reading the 'launcher' is what makes the config of the car legible by normal people so they can code it properly.

Do anyone have a way to find certain coding ; specifically to make this change

SAS2 > CAFD_42C1 > C_SWA_VORHANDEN
Default: Nr000_nicht_vorhanden
Change to: NR001_VORHANDEN

Without the 3.0 launcher (basically reading it verbatim from the car)

Cheers

[ifr]

Originally Posted by BlueOnBlue

Hi folks

Just finished coding via bimmercode, to enable the dash display.

Works just fine, even have the option turned on for 'lane change assist' in the settings now, but obviously it doesn't work because of the SAS module being uncoded to allow it

Again I used bimmercode in expert mode to enable all the dash functions, and now my question;

I also have the coding cable and Esys software , and when I tried to do that route for coding discovered because I don't have the 3.0 launcher (my understanding is the author has stopped responding to people trying to buy the software) , so all I get when I load the existing 'free' launcher is a load of nonsense I can't understand

From my reading the 'launcher' is what makes the config of the car legible by normal people so they can code it properly.

Do anyone have a way to find certain coding ; specifically to make this change

SAS2 > CAFD_42C1 > C_SWA_VORHANDEN
Default: Nr000_nicht_vorhanden
Change to: NR001_VORHANDEN

Without the 3.0 launcher (basically reading it verbatim from the car)

Cheers

Easy - buy esysx. Job done

[ifr]

Originally Posted by RSnic

Mine works on not only highways, but also on regular multi-level roads-- no problem

It doesn't work on all 2+ road types in the UK.

Seems a bit random as to which work and which don't, but all motorways work. Dual-carriageways are hit and miss. Some auto lane change, some disengage the Assisted Driving.

[BlueOnBlue]

Originally Posted by ifr

Easy - buy esysx. Job done

that's it eh, so the launcher pro i have is useless?

happy to buy esysx, but which version do i need? there are like 50 options

[ifr]

Originally Posted by BlueOnBlue

that's it eh, so the launcher pro i have is useless?

happy to buy esysx, but which version do i need? there are like 50 options

Yeah Launcherpro doesnt have current mappings so pot luck if you can find the coding you need. I personally wouldn't touch it these days.

Go for standard 32/64-bit licence. Expert isn't needed unless you plan on doing coding discovery.

Dongle version allows it work in a VM and transfer to another PC, but is often out of stock and can take time for postal delivery.

Non-dongle is much cheaper but is tied to the physical PC its installed on.

[BlueOnBlue]

Originally Posted by ifr

Yeah Launcherpro doesnt have current mappings so pot luck if you can find the coding you need. I personally wouldn't touch it these days.

Go for standard 32/64-bit licence. Expert isn't needed unless you plan on doing coding discovery.

Dongle version allows it work in a VM and transfer to another PC, but is often out of stock and can take time for postal delivery.

Non-dongle is much cheaper but is tied to the physical PC its installed on.

thanks... i already ordered just waiting for my key now

non dongle is fine, as i have the enet cable and a dedicated laptop anyways

cheers !

[Turisto]

Hello,

I just recently received my G20 which has software 2020.11 installed.
I tried to code lane assistant but it doesn't work with the message:

CAFD_00007083_023_060_113 Fehler:
File for "cafd_00007083-023_060_113" not found! [C012]

As far as I understood the psdzdata i used (PSdZData Lite v4.26.22) is outdated.
Do you know where can i get the latest data please?


Update: Found new data. it works now!

[Ynorecex]

Originally Posted by Turisto

Hello,

I just recently received my G20 which has software 2020.11 installed.
I tried to code lane assistant but it doesn't work with the message:

CAFD_00007083_023_060_113 Fehler:
File for "cafd_00007083-023_060_113" not found! [C012]

As far as I understood the psdzdata i used (PSdZData Lite v4.26.22) is outdated.
Do you know where can i get the latest data please?


Update: Found new data. it works now!

Same problem here, I had enabled it before ... But now the car has updated and receives the same error. Where can I get the updated PSdZData?

[ifr]

Originally Posted by Ynorecex

Same problem here, I had enabled it before ... But now the car has updated and receives the same error. Where can I get the updated PSdZData?

Car tech forum or ask Shawn on one of the threads on here

[srbs73]

Originally Posted by Ynorecex

Same problem here, I had enabled it before ... But now the car has updated and receives the same error. Where can I get the updated PSdZData?

Have a look at this thread: https://g20.bimmerpost.com/forums/sh...673049&page=28

[Fpgiuliano]

In my ota 11/2020.50 there is lca enabled for these country
France. Portugal and Spain

[psyffe]

So I'm not sure where I went wrong (screencap included) but when I tried to open up DKOMBI4 for coding this is what showed up instead of what was expected. Any help is appreciated!

[srbs73]

Originally Posted by psyffe

So I'm not sure where I went wrong (screencap included) but when I tried to open up DKOMBI4 for coding this is what showed up instead of what was expected. Any help is appreciated!

That looks right and similar to the video guide on the first page of this thread? Did the search not find anything?

I believe you have the latest psdzdata. I used Esys 3.32.1 with an updated version of EsysX which I downloaded this month.

[Fpgiuliano]

You need esysx
Launcher is not compatible with new car

[ifr]

Originally Posted by psyffe

So I'm not sure where I went wrong (screencap included) but when I tried to open up DKOMBI4 for coding this is what showed up instead of what was expected. Any help is appreciated!

Launcherpro 2.8.2 isnt going to cut it with later istep and psdzdata.

There is sometimes mappings for older i-step and older psdzdata but based on your screenshot, 2.8.2 is missing the mappings.

You need to buy esysx

[psyffe]

Nope, the search yielded no results, for any of the items he searched for

[psyffe]

Originally Posted by ifr

Launcherpro 2.8.2 isnt going to cut it with later istep and psdzdata.

There is sometimes mappings for older i-step and older psdzdata but based on your screenshot, 2.8.2 is missing the mappings.

You need to buy esysx

Damn, was trying to avoid paying anything more but thanks for the help!