05-13-2022, 11:32 AM | #1 |
New Member
8
Rep 21
Posts |
DKOMBI4 flashing failed. Any idea?
Hello,
Please, could you give me an idea what is wrong and how to do successful flash. Ethernet cable. BMW G20 2019, updated all ECUs (flashed). All (23 of 24) went well, except DKOMBI4. DKOMBI4 is not working, but it is still possible to flash it. I tried to repeat it, but getting the same error. Log: <[DKOMBI4 - 60] prepareECUforBLUpdate started [PROGRESS]> <[DKOMBI4 - 60] prepareECUforBLUpdate finished [PROGRESS]> <[DKOMBI4 - 60] authenticateECUforBLUpdate started [PROGRESS]> <[DKOMBI4 - 60] authenticateECUforBLUpdate finished [PROGRESS]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: TA started [TRANSACTION]> <[DKOMBI4 - 60] performECUBLUpdate started with protocol UDS [PROGRESS]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: 0% progress on ECUIdKOMBI4_0x60 [0% of flsl_00005c56-100_003_005] [TRANSACTION]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: 0% progress on ECUIdKOMBI4_0x60 [0% of flsl_00005c56-100_003_005] [TRANSACTION]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: 0% progress on ECUIdKOMBI4_0x60 [0% of flsl_00005c56-100_003_005] [TRANSACTION]> <[] job failed with negative response error: code: repeat job description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: DKOMBI4_60_ETHERNET severity: ERROR [THROWABLE]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: TA finished [TRANSACTION]> <[DKOMBI4 - 60] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: code: repeat job description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: DKOMBI4_60_ETHERNET severity: ERROR [WARN]> <[DKOMBI4 - 60] - [Exception - DKOMBI4 - 60] job failed with negative response error: code: repeat job description: Service TD returned a negative response with response code generalProgrammingFailure; LinkName: DKOMBI4_60_ETHERNET severity: ERROR > <[DKOMBI4 - 60] prepareECUforBLUpdate started [PROGRESS]> <[DKOMBI4 - 60] prepareECUforBLUpdate finished [PROGRESS]> <[DKOMBI4 - 60] authenticateECUforBLUpdate started [PROGRESS]> <[DKOMBI4 - 60] authenticateECUforBLUpdate finished [PROGRESS]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: TA started [TRANSACTION]> <[DKOMBI4 - 60] performECUBLUpdate started with protocol UDS [PROGRESS]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: 0% progress on ECUIdKOMBI4_0x60 [0% of flsl_00005c56-100_003_005] [TRANSACTION]> <MCDDiagService<id=28634, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RD - RequestDownload, description=error: negative response : conditionsNotCorrect, link=DKOMBI4_60_ETHERNET> [DIAGSERVICE]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: 0% progress on ECUIdKOMBI4_0x60 [0% of flsl_00005c56-100_003_005] [TRANSACTION]> <[] job failed with negative response error: code: repeat job description: Service RD returned a negative response with response code conditionsNotCorrect; LinkName: DKOMBI4_60_ETHERNET severity: ERROR [THROWABLE]> <[DKOMBI4 - 60 - flsl_00005c56-100_003_005] Transaction type: blFlash; Message: TA finished [TRANSACTION]> <[DKOMBI4 - 60] There was an error during TAL execution, please check the log files. [WARN]> <[DKOMBI4 - 60] - [Exception - DKOMBI4 - 60] job failed with negative response error: code: repeat job description: Service RD returned a negative response with response code conditionsNotCorrect; LinkName: DKOMBI4_60_ETHERNET severity: ERROR > <[DKOMBI4 - 60] installECUBL started [PROGRESS]> <[DKOMBI4 - 60] installECUBL finished [PROGRESS]> <[DKOMBI4 - 60] finalizeECUBLUpdate started [PROGRESS]> <[DKOMBI4 - 60] finalizeECUBLUpdate finished [PROGRESS]> <[] There was an error, please check the log files. [WARN]> <[] - [Exception - DKOMBI4 - 60] job failed with negative response error: code: repeat job description: Service RD returned a negative response with response code conditionsNotCorrect; LinkName: DKOMBI4_60_ETHERNET severity: ERROR > |
05-26-2022, 02:23 PM | #8 |
New Member
8
Rep 21
Posts |
Looks like bootloader was incorrectly flashed (mistake in 2022.03 data?)
KOMBI didn't want to reply on several important requests. 1. Tried to flash in the car, didn't work well 2. Removed 3. Disassembled, made sure everything is OK and the part is original from this car. Confirmed that. 4. Attached to their harness on the table, flashed after several tries. 5. Works fine, no errors in ISTA. I checked again with esys, TAL calculating. All 24 modules are visible and fine. 23 of them are black (no changes) after SVT calculation. Kombi HW is black, everything else is RED / BLUE, which makes me think it may be some mistake in this psdzdata... and I won't update this module using this psdzdata... |
Appreciate
1
larrylam646370.50 |
05-27-2022, 07:16 AM | #9 | |
Private
7
Rep 74
Posts
Drives: BMW 330i G20 2019 Sportline
Join Date: Mar 2017
Location: Buenos Aires, Argentina
|
Quote:
|
|
Appreciate
0
|
07-05-2022, 06:57 AM | #13 |
Private
7
Rep 74
Posts
Drives: BMW 330i G20 2019 Sportline
Join Date: Mar 2017
Location: Buenos Aires, Argentina
|
|
Appreciate
0
|
07-05-2022, 02:28 PM | #14 |
Private
27
Rep 83
Posts |
Not possible to solve, i used 22-07-521
Sent it to someone who tried to repair it on the bench, but did not get it work. He said PT Can Wakeup Line defect. I dont know what this is and who can repair.I have bought now a virginized used one.Will see if it works |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
coding, dkombi4, flashing, g20, programming |
|
|