[Mikeowen03]

I have just purchased another bmw g20 from an insurance company which has front end damage, it doesn't have heads up display altho I have the hud dashboard and hud unit already, also it has led headlights as standard theses are damaged but I have a set of laser headlight I would like to put in, can somebody help with coding for both hud and laser headlight any help would be appreciated

Thanks in advance

[Mikeowen03]

does anybody know on how i code theses used pair of laser headlights instead of led lights

[Rastlein]

Originally Posted by Mikeowen03

does anybody know on how i code theses used pair of laser headlights instead of led lights

I'm interested. I plan to replace my led standard headlights with lasers in the future. Where did you buy the laser headlights?

[Mikeowen03]

Already had a set of laser lights I fitted them last week and had them coded in already

[Rastlein]

Can you explain the installation and coding process and put some photos of the car before and after?
Thank you!

[Mikeowen03]

Instalation direct replacement no wireing need as led headlights and laser headlight share the same plug and pin locations for wires, you will also need to place the squib to 1 that has both BC button and auto high beem assist button on the lfleft indicator stalk, I did not code the laser headlights in I had somebody remotely code this from Lithuania for £50,

Have also fitted HUD and wireless phone charging,

2019 bmw 330e, M340i carbon M Performance conversion

[NFB]

What was needed for the HUD to be fitted and coded?

[purpl3ish]

we can swap for my painted ones when my lease is over!

[vsterian]

Mikeowen03
I'm curious about one thing, I assume that your G20 came without HBA, right?
How did you manage this topic in regards with the Laser Retrofit?
I have also a 320xd G20 with standard led and no HBA ( no splited BC/HBA handle on the left side of the steering wheel).

Can Laser lights can be coded without that handle and be fully functional?

Thanks,
Vlad

[Eyeball]

Originally Posted by Rastlein

Can you explain the installation and coding process and put some photos of the car before and after?
Thank you!

Hi there I am considering swapping my led lights to laser. Can I just swap the lights and use electrics from my leds or do I need modules etc ?

[kamer7]

Originally Posted by Mikeowen03

Instalation direct replacement no wireing need as led headlights and laser headlight share the same plug and pin locations for wires, you will also need to place the squib to 1 that has both BC button and auto high beem assist button on the lfleft indicator stalk, I did not code the laser headlights in I had somebody remotely code this from Lithuania for £50,
n

What about upgrading basic LED headlights? There are 3 versions: base, extended and Laser lights, is going to Lasers from the bottom version without High Beam Assist any more difficult than from middle one?