[jpaulo]

Great thread!
Looking forward to try on a 320i and report back my results.

[Donia330i]

has anyone done this after the 07/202 OTA update? I've tried with my eternal adapter and it doesn't seem to connect. Worked fine on the prior software.

[JTYAMSHAYIN]

Originally Posted by Donia330i

has anyone done this after the 07/202 OTA update? I've tried with my eternal adapter and it doesn't seem to connect. Worked fine on the prior software.

Done something specifically? or just coding in general? I just coded my car and its on the newest update.

[EDMG20]

Originally Posted by JTYAMSHAYIN

Done something specifically? or just coding in general? I just coded my car and its on the newest update.

Same here, I just recoded all my favourite things. There should be no problems with adding pervious coding options.

[Donia330i]

Originally Posted by JTYAMSHAYIN

Done something specifically? or just coding in general? I just coded my car and its on the newest update.

I cannot even get the Bimmercode app to connect at all

[Donia330i]

Originally Posted by EDMG20

Same here, I just recoded all my favourite things. There should be no problems with adding pervious coding options.

I cannot connect at all

Would using an iPhone 12 matter?

[Donia330i]

I can't even get access to car. Says connection error.

[biglesias31]

Originally Posted by Donia330i

I can't even get access to car. Says connection error.

Make sure you have the beta version of BimmerCode

[Andy3661]

Originally Posted by biglesias31

Make sure you have the beta version of BimmerCode

How do you get the beta version?

[Donia330i]

Originally Posted by biglesias31

Make sure you have the beta version of BimmerCode

I do I've coded tons of things before. Never had an issues until after this update

[JTYAMSHAYIN]

Originally Posted by Donia330i

I do I've coded tons of things before. Never had an issues until after this update

What device are you coding off of? I used both my IPhone and Ipad yesterday and I just used the normal Bimmercode App , i didn't have to request the beta. Make sure the Bimmercode App is up to date, then completely close the app and open it back up again to confirm it's not still on a previous version.

[claykin]

Originally Posted by fakca38

Can the errors in the picture be corrected with bimmercode?

Why not take it to your bmw dealer and let them fix under warranty? Or is there more to this story?

[biglesias31]

Originally Posted by Andy3661

How do you get the beta version?

Go into Settings in the app and send a support request email asking to test the beta version of the app

[Donia330i]

Ok, i got it working, had to turn on local network in privacy settings for the app.

Another question - does anyone have the HUD? I noticed after the update the REV indicator isn't there. I either turned something off or the updated removed it. Thoughts?

[njfoses]

Originally Posted by Donia330i

Ok, i got it working, had to turn on local network in privacy settings for the app.

Another question - does anyone have the HUD? I noticed after the update the REV indicator isn't there. I either turned something off or the updated removed it. Thoughts?

https://g20.bimmerpost.com/forums/sh....php?t=1768645

[AndyTeb]

Can someone please share the codes to change the ambient light colours, thanks.

[helmet91]

Originally Posted by AndyTeb

Can someone please share the codes to change the ambient light colours, thanks.

Pretty sure that's an ESYS thing, not BimmerCode.

[andy5468]

Originally Posted by AndyTeb

Can someone please share the codes to change the ambient light colours, thanks.

Happy to share my own personal settings, which I put together with support from others in this group.

I have coded mine with Bimmercode beta in expert mode to replace the Bronze and White and also the Green and White with Red and Blue. This will not change the displayed colours shown in the I drive screen, but will replace your strips, door bins, map light and footwell light colours and orientations as indicated below.

This is my personal list which I use to re code my colours to my preference after each BMW software update. I have to code both 360A and 360D.

Works fine on my UK G20 running 07/20.54 software. Code at your own risk. Coding in expert mode can damage your car.


BDC module > Expert coding > 360A LicLciColorLibrary > LIC_LCI_COLOR_LIBRARY_DATA > G20G21G26G28G80_Lichtpaket_code1 (selected option) > Custom value

1. Original hex values:

Byte 18 - D7
Byte 19 - 6E
Byte 20 – 14

Byte 23 - D7
Byte 24 - 6E
Byte 25 - 14


Byte 28 - D7
Byte 29 - 6E
Byte 30 - 14

2. New hex values:

Byte 18 – FF
Byte 19 - 00
Byte 20 – 00


Byte 23 – FF
Byte 24 - 00
Byte 25 - 00


Byte 28 – FE
Byte 29 – 0A
Byte 30 – 0A

BDC module > Expert coding > 360D LicLciColorProfiles > LIC_LCI_COLOR_PROFILES_DATA > G20G21G26G28G80_Lichtpaket_code1 (selected option) > Custom value

1. Original hex values:
Byte 2 – 01 bronze
Byte 3 – 00 white

Byte 16 – 04 green
Byte 17 – 00 white

New hex values:
Byte 2 – 01 (Map Lights, Door handles, Door bins, Footwells) Now Red Colour
Byte 3 – 03 (Door / Dash strips) Now Blue Colour

Byte 16 – 03 (Map Lights, Door Handles, Door Bins, Footwells) Now Blue Colour
Byte 17 – 01 (Door / Dash Strips) Now Red Colour

[Basti@G20 320D]

This topic is way to good not to be at the top....come on guys coding cheat sheet ....

[Paolo73]

Originally Posted by andy5468

Happy to share my own personal settings, which I put together with support from others in this group.

I have coded mine with Bimmercode beta in expert mode to replace the Bronze and White and also the Green and White with Red and Blue. This will not change the displayed colours shown in the I drive screen, but will replace your strips, door bins, map light and footwell light colours and orientations as indicated below.

This is my personal list which I use to re code my colours to my preference after each BMW software update. I have to code both 360A and 360D.

Works fine on my UK G20 running 07/20.54 software. Code at your own risk. Coding in expert mode can damage your car.


BDC module > Expert coding > 360A LicLciColorLibrary > LIC_LCI_COLOR_LIBRARY_DATA > G20G21G26G28G80_Lichtpaket_code1 (selected option) > Custom value

1. Original hex values:

Byte 18 - D7
Byte 19 - 6E
Byte 20 – 14

Byte 23 - D7
Byte 24 - 6E
Byte 25 - 14


Byte 28 - D7
Byte 29 - 6E
Byte 30 - 14

2. New hex values:

Byte 18 – FF
Byte 19 - 00
Byte 20 – 00


Byte 23 – FF
Byte 24 - 00
Byte 25 - 00


Byte 28 – FE
Byte 29 – 0A
Byte 30 – 0A

BDC module > Expert coding > 360D LicLciColorProfiles > LIC_LCI_COLOR_PROFILES_DATA > G20G21G26G28G80_Lichtpaket_code1 (selected option) > Custom value

1. Original hex values:
Byte 2 – 01 bronze
Byte 3 – 00 white

Byte 16 – 04 green
Byte 17 – 00 white

New hex values:
Byte 2 – 01 (Door / Dash strips) Now Blue Colour
Byte 3 – 03 (Map Lights, Door handles, Door bins, Footwells) Now Red Colour

Byte 16 – 03 (Map Lights, Door Handles, Door Bins, Footwells) Now Blue Colour
Byte 17 – 01 (Door / Dash Strips) Now Red Colour

To have all red?
Write the step please.

[chris_portimaog20]

Rear DRL
1. HU_MGU->HMI_SPEECH->DAYDRIVING_LIGHT_REAR->aktiv
2. BDC in Expert Mode > 3702LicFeatures->Feature_4 ->activ[/QUOTE]

no need anymore for bimmercode for rear DRL activation
it is now part of ID7 since the update

[andy5468]

Originally Posted by chris_portimaog20

Rear DRL
1. HU_MGU->HMI_SPEECH->DAYDRIVING_LIGHT_REAR->aktiv
2. BDC in Expert Mode > 3702LicFeatures->Feature_4 ->activ

It's worth adding that if you had previously activated your rear DRL's with this coding, you may find you need to reverse / deactivate this coding otherwise your rear DRL's may not work correctly through ID7 when the latest BMW software update is applied.

I had exactly that issue.

After the 07/2020 coding update, I had to change the 3702LicFeatures back to not activ to get my rear DRL's to operate through ID7. It was required though prior to that update.

Rear DRL's can now be enabled through the standard Bimmercode coding options, rather than through expert mode.