10-13-2021, 09:58 PM | #1 |
Private
59
Rep 73
Posts
Drives: '22 G80 Portimao XDrive Comp
Join Date: Dec 2014
Location: Silicon Valley
|
A little My car freshly washed with tint and PPF.
A little 3D waterless wash and Ammo NYC Spit love in the early evening.
The car has: Xpel Ultima Plus ppf full frontal, b and c pillars and rear arch guards. Xpel Prime XR Plus tint 70% windshield, 35% all around. Tint is easy to see through at night and cuts the heat and glare way down. |
10-14-2021, 11:32 AM | #3 | |
First Lieutenant
764
Rep 399
Posts |
Quote:
|
|
Appreciate
1
Driggett58.50 |
10-14-2021, 11:45 AM | #4 |
Private
59
Rep 73
Posts
Drives: '22 G80 Portimao XDrive Comp
Join Date: Dec 2014
Location: Silicon Valley
|
The product line is quite good but a little expensive. I use the entire line with the addition of 3D waterless wash. I use Frothe for an intermediate between Rinseless wash and a waterless wash times. I did not like the whole foaming and two bucket method because I swear I spend more time getting the dried soap suds off. I have used rinses/waterless wash route on my cars for the last six years and have not marred them when used properly. I can only detail my car in the driveway. The Reflex enamel coat so far has been very good keeping the etching components(Bird droppings, tree wet junk, bee poop) from doing their job. They are easy to wipe off. Ammo Skin was very effective in allowing track rubber etchings to come off quite easily.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
3d waterless wash, ammo nyc spit, ppf, tint, xpel |
Thread Tools | Search this Thread |
|
|