getBMWparts.com

Evan@Tischer · 02-13-2024, 01:11 PM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

getBMWparts.com | NEW Dinan BMW G2x/G4x Heat Exchanger!!!

The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger! Improving the overall thermal management system so everything runs cooler and more efficiently while being budget friendly has never been easier.

The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock the Dinan heat exchanger is ready, and able, to assist in extending your vehicles ability to deliver maximum performance time and time again for your driving enjoyment!

Application(s):

2022-2024 BMW G42 M240i
2019-2024 BMW G20 M340i
2021-2024 BMW G22/G23/G26 M440i
2020-2024 BMW G29 Z4 M40i
2022-2024 BMW G42 230i
2019-2024 BMW G20 330i
2021-2024 BMW G22/G23/G26 430i
2019-2024 BMW G29 Z4 30i
2020-2024 Toyota GR Supra (3.0T)
2021-2024 Toyota GR Supra (2.0T)

Features and Benefits:

Average of 8.7º reduction in charge air temps with a maximum reduction of nearly 12º over 30 successive WOT pulls
General improvement to the efficiency of the thermal management system, inclusive of engine cooling
45mm thick Dinan core vs. 26.75mm thick stock cooler core
68% more cooling surface area and volume than stock
Reduces the tendency to heat soak / go in to limp mode
Durable bar and plate design that is less susceptible to damage from road debris
Pressure tested, 100% TIG welded, Aluminum construction
Direct fit replacement with no modifications required

Get Yours Here!!!

02-13-2024, 01:11 PM	#1
Evan@Tischer 3368 Rep 22,756 Posts Drives: Online Parts Sales Join Date: Jul 2007 Location: Silver Spring, MD iTrader: (46)	getBMWparts.com \| NEW Dinan BMW G2x/G4x Heat Exchanger!!! BIMMERPOST / Classifieds Asking Price: None Item Interest getBMWparts.com \| NEW Dinan BMW G2x/G4x Heat Exchanger!!! The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger! Improving the overall thermal management system so everything runs cooler and more efficiently while being budget friendly has never been easier. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock the Dinan heat exchanger is ready, and able, to assist in extending your vehicles ability to deliver maximum performance time and time again for your driving enjoyment! Application(s): 2022-2024 BMW G42 M240i 2019-2024 BMW G20 M340i 2021-2024 BMW G22/G23/G26 M440i 2020-2024 BMW G29 Z4 M40i 2022-2024 BMW G42 230i 2019-2024 BMW G20 330i 2021-2024 BMW G22/G23/G26 430i 2019-2024 BMW G29 Z4 30i 2020-2024 Toyota GR Supra (3.0T) 2021-2024 Toyota GR Supra (2.0T) Features and Benefits: Average of 8.7º reduction in charge air temps with a maximum reduction of nearly 12º over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Get Yours Here!!! __________________ Evan Winstead · Internet Parts Director Contact Us \| Facebook \| Twitter \| New: Shop Porsche & Audi parts!
	Appreciate 0 Tweet Quote