vicfalc09 | BMW M Performance Carbon Fiber Mirror Cap Installation

vicfalc09 · 06-11-2019, 08:58 PM

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

senderhomes · 06-12-2019, 12:04 PM

Quote:

Originally Posted by vicfalc09

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

Looks good. Thanks for the detailed instructions

ssadri · 06-13-2019, 01:01 PM

Love the detailed instructions on the installation. I really want to get the Shadow Line Gloss Black version of the mirror caps but I am on the fence about the Carbon Fiber look with my Dravit Grey Metallic finish. It seems you have the same color M340i, How do you like the contrast between the two finishes?

vicfalc09 · 06-13-2019, 01:04 PM

Quote:

Originally Posted by ssadri

Love the detailed instructions on the installation. I really want to get the Shadow Line Gloss back version of the mirror caps but on the fence about the Carbon Fiber look with my Dravit Grey Metallic combo. It seems you have the same color M340i, How do you like the contrast between the two finishes?

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

ssadri · 06-13-2019, 01:17 PM

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

vicfalc09 · 06-13-2019, 01:29 PM

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

Front grille or the lower front bumper air ducts? Both are cerium...

miked1999 · 06-14-2019, 12:14 AM

Quote:

Originally Posted by ssadri

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

I'm in the same boat. My dealership is clueless on the part # for the Shadow line 340i grill as well!! Driving me crazy. If it's an option in Canada, it's got to be something we can receive in the states. ....Anybody have any leads or suggestions?

Also... who's replaced their cerium gray bumper trim? My body shop quoted a stupid price to remove/paint/replace the gray inserts. What do ya'll think... is this a simple plug & play or pro job?

themnmd · 06-14-2019, 12:19 AM

Quote:

Originally Posted by senderhomes

Quote:

Originally Posted by vicfalc09

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

Looks good. Thanks for the detailed instructions

I will be taking no chances, I am having mine installed at port

chenry · 06-14-2019, 12:23 AM

I've done this countless times on present and past BMWs but theG20 I would have struggled with if it wasn't for this DIY. Thanks for taking the time to document and share! I'll file this away for when the time comes

evo2335 · 06-14-2019, 05:59 AM

Quote:

Originally Posted by themnmd

Quote:

Originally Posted by senderhomes

Quote:

Originally Posted by vicfalc09

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

Looks good. Thanks for the detailed instructions

I will be taking no chances, I am having mine installed at port

That's what I did. Seems harder than it should be

ssadri · 06-15-2019, 10:51 AM

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

Front grille or the lower front bumper air ducts? Both are cerium...

The front grill I can't find. The front bumper trims I found:
Here is all I could discover so far but my local dealership said the part number of the grill is for what I already have on my car. I'm confused.

M Grille Front: 51138075665
Individual Option: Shadow-Line S7M9A=Yes
M Aerodynamic Package S715A=Yes

Exhaust End Pipe Trim, Left: 51128093303
Exhaust End Pipe Trim, Right: 51128093304
Individual Option High-Gloss Shadow-Line S7M9A=Yes

Trim on Grill, side, left: 51118093301
Trim on Grill, side, Right: 51118093302
Individual High-Gloss Shadow-Line S7M9A=Yes

vicfalc09 · 06-15-2019, 10:54 AM

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

Front grille or the lower front bumper air ducts? Both are cerium...

The front grille I can't find. The front bumper trim I found:

Trim on Grill, side, left: 51118093301
Trim on Grill, side, Right: 51118093302
Individual High-Gloss Shadow-Line S7M9A=Yes

With park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

Without park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

ssadri · 06-15-2019, 05:33 PM

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

Front grille or the lower front bumper air ducts? Both are cerium...

The front grille I can't find. The front bumper trim I found:

Trim on Grill, side, left: 51118093301
Trim on Grill, side, Right: 51118093302
Individual High-Gloss Shadow-Line S7M9A=Yes

With park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

Without park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

I saw that one and it looks great, but I was hoping to find the particular staggered look style that is similar to the one I have in the shadow line gloss black finish like in the picture.

vicfalc09 · 06-15-2019, 05:40 PM

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

Quote:

Originally Posted by ssadri

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

Exactly how I feel about the Cerium Grey. It is ugly and already has water stains on it and I only had the car less than a week now.
Have your already ordered the front grill replacement? If so, what part number and where did you order from?

I called my local dealership and they are clueless on how to order the correct parts for me.

Front grille or the lower front bumper air ducts? Both are cerium...

The front grille I can't find. The front bumper trim I found:

Trim on Grill, side, left: 51118093301
Trim on Grill, side, Right: 51118093302
Individual High-Gloss Shadow-Line S7M9A=Yes

With park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

Without park assist: https://www.bmwpartspros.com/partloc...catalogid=8798

I saw that one and it looks great, but I was hoping to find the particular staggered look style that is similar to the one I have in the shadow line gloss black finish like in the picture.

I have not seen that part released for ordering.

senderhomes · 06-18-2019, 08:13 AM

Quote:

Originally Posted by vicfalc09

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

[img]

View post on imgur.com

[/img]

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

[img]

View post on imgur.com

[/img]

[img]

View post on imgur.com

[/img]

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

[img]

View post on imgur.com

[/img]

[img]

View post on imgur.com

[/img]

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

[img]

View post on imgur.com

[/img]

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

Looks good. Thanks for the detailed instructions

miked1999 · 06-18-2019, 11:53 AM

Quote:

Originally Posted by vicfalc09

I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below:

Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off.

Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror.

Step 3 - Remove an additional two screw that attach mirror cover to lighting strip.

Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off.

Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics.

BMW M PERFORMANCE CARBON FIBER MIRROR CAP
51162462825

https://www.bmwpartspros.com/sfimage...mage242006.jpg

Outstanding instructions! I performed this mod on Sunday and I would never have attempted it without your guide! Thank you for blazing the trail. I was planning to have the dealership do the work... so your efforts saved me at least $100 or more. Thank you! Knowing what I know now, the only thing I would have done differently is wrap painters tape on the mirror edges after popping out the glass...Got a few small scratches to buff out from the rubbing of the mirror on the inner housing during reassembly. Otherwise, amazing outcome all around!!

ssadri · 06-27-2019, 11:32 AM

Just installed my Carbon Fiber mirror caps. I like this design with the extended wing!

evo2335 · 06-27-2019, 05:38 PM

Quote:

Originally Posted by ssadri

Just installed my Carbon Fiber mirror caps. I like this design with the extended wing!

Those are cool looking caps. Where are they from? Has a M-vibe to them

ssadri · 06-27-2019, 07:08 PM

Quote:

Originally Posted by evo2335

Those are cool looking caps. Where are they from? Has a M-vibe to them

Thank you, I got them on Amazon. I do love the "M" vibe they got

Looks very aggressive

https://www.amazon.com/Cuztom-Tuning...gateway&sr=8-2

th1rd3y3 · 07-02-2019, 12:03 PM

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

So given your experience and breaking those tabs, do you think it's possible to get the cerium covers off and keep them intact?

vicfalc09 · 07-02-2019, 04:01 PM

Quote:

Originally Posted by th1rd3y3

Quote:

Originally Posted by vicfalc09

My car is Mineral Grey Metallic. I am also doing the carbon fiber m performance rear spoiler and replacing the front bumper cerium grey trim with gloss black. I think the carbon is a nice touch on any grey color car.

My goal was to get rid of all the cerium grey as I don't like it at all.

So given your experience and breaking those tabs, do you think it's possible to get the cerium covers off and keep them intact?

Potentially with further disassembly of the mirror components.

Glassy · 07-03-2019, 01:52 AM

06-11-2019, 08:58 PM	#1
vicfalc09 Second Lieutenant 183 Rep 271 Posts Drives: M340i xDrive Join Date: Feb 2019 Location: New Jersey iTrader: (0)	vicfalc09 \| BMW M Performance Carbon Fiber Mirror Cap Installation I installed the M Performance Carbon Fiber Mirrors today for my G20 M340i. This installation is not as straight forward as previous models as you will see below. There would be further mirror disassembly required if I did not break the clips. See below: Step 1 - Pop the mirror off by tilting it all the way up from the electronic controls and use a plastic trim tool to pry off. Step 2 - Locate the 4 screws shown here to remove black gloss shroud from mirror. Step 3 - Remove an additional two screw that attach mirror cover to lighting strip. Step 4 - Pull mirror cover away from vehicle the only tabs still holding it on are the 3 at the bottom of the mirror cover that I broke when pulling off. Step 5 - Attach lighting strip to new Carbon Fiber mirror cover with screws. Re attach mirror cover to mirror assembly ensuring all clips engage. Re attach mirror connections and electronics. BMW M PERFORMANCE CARBON FIBER MIRROR CAP 51162462825 https://www.bmwpartspros.com/sfimage...mage242006.jpg
	Appreciate 5 VipinLJ1215.00 A6bullet323.50 OM3RTA203.00 longlasting33.50 oreoOozZz44.50 Tweet Quote

06-13-2019, 01:01 PM	#3
ssadri Private 51 Rep 95 Posts Drives: 2020 BMW M340i Stage 1 MP Join Date: Jan 2019 Location: Irvine, CA iTrader: (0)	Love the detailed instructions on the installation. I really want to get the Shadow Line Gloss Black version of the mirror caps but I am on the fence about the Carbon Fiber look with my Dravit Grey Metallic finish. It seems you have the same color M340i, How do you like the contrast between the two finishes? __________________ 2020 BMW ///M340i Dravit Grey Metallic (Individual) MP Stage 1 2019 BMW X5 40i ///M-Sport (Recalled) Mineral White Metallic 2011 Porsche Panamera Turbo S (Sold) Basalt Black Metallic 2009 BMW X6 50i Dinan (Sold) Alpine White 2003 BMW ///M3 (Sold) Laguna Seca Blue \| 1995 BMW ///M3 (Sold) Santorini Blue II
	Appreciate 0 Quote

06-14-2019, 12:23 AM	#9
chenry Colonel 1457 Rep 2,290 Posts Drives: M340(15 before)& Boston Whaler Join Date: Feb 2012 Location: SoCal: Huntington Beach iTrader: (8)	I've done this countless times on present and past BMWs but theG20 I would have struggled with if it wasn't for this DIY. Thanks for taking the time to document and share! I'll file this away for when the time comes
	Appreciate 0 Quote

06-27-2019, 11:32 AM	#17
ssadri Private 51 Rep 95 Posts Drives: 2020 BMW M340i Stage 1 MP Join Date: Jan 2019 Location: Irvine, CA iTrader: (0)	Just installed my Carbon Fiber mirror caps. I like this design with the extended wing! Attached Images __________________ 2020 BMW ///M340i Dravit Grey Metallic (Individual) MP Stage 1 2019 BMW X5 40i ///M-Sport (Recalled) Mineral White Metallic 2011 Porsche Panamera Turbo S (Sold) Basalt Black Metallic 2009 BMW X6 50i Dinan (Sold) Alpine White 2003 BMW ///M3 (Sold) Laguna Seca Blue \| 1995 BMW ///M3 (Sold) Santorini Blue II
	Appreciate 0 Quote

07-03-2019, 01:52 AM	#22
Glassy E36, E46, E90, E92, F32 79 Rep 367 Posts Drives: G20 M340i Join Date: Jun 2008 Location: Cali iTrader: (2)	Attached Images __________________
	Appreciate 2 vicfalc09182.50 ssadri50.50 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search