[chutoy]

Bought some vinyl wrap to blackout my rear reflectors. Couldn’t figure out how to remove them without snapping them, so wrapped them in place.

[suizyun]

Got new full cover floor mats from my friend's new business, easier to clean than the OE liners and also aesthetically pleasing with that red. Pictures may make it seem a bit too bright, but in person it matches the interior perfectly.

[dhock_holiday]

Originally Posted by panki_86

I love my alcantara armrest. Mine is original M performance one.

Looks great but won’t it get dirty/worn after a while?

[Davg31]

Lol new company, more like advertising a typical Chinese Ali express product

[zlatko]

Added alcantara knee pads. I would have preferred that the Chinese "designer" had spared the fake M-stitching, but otherwise it feels great and fits pretty neat! Takes 30 seconds to "install" and costs a fraction of the real thing

[MoeTE87]

Originally Posted by zlatko

Added alcantara knee pads. I would have preferred that the Chinese "designer" had spared the fake M-stitching, but otherwise it feels great and fits pretty neat! Takes 30 seconds to "install" and costs a fraction of the real thing

Link please?

[zlatko]

MoeTE87, here you are: https://www.aliexpress.com/item/1005006019584533.html

[MoeTE87]

Thanks!

[zazzau]

M performance Alcantara armrest + door handle Alcantara armrest and Maxpider mats

[M340I///M]

Originally Posted by eforty6_m3

Yesterday, I finally got around to installing the Infinite Autowerks cold air intake on the M340i:

IAW intake

Thanks for sharing! I want to pull the plug on this intake or MST .

I was looking at the front mount intake by RK Tunes, but what held me back was two things ( from watching a install video) you have to shave the map sensor to make it fit ( this made me think that perhaps this intake wasn’t meant for the m340i and perhaps a 340i or a b58 with a smaller map sensor , im assuming). And where the cone sits the Vbrace is pushing against the intake tube causing it to flatten a tad.

I spoke to RK Tunes ( cool guys by the way) and they have plans to update the intake. But I’m sure it won’t be anytime soon. So I probably go with the one you have.

How do you like it so far?

[I800C0LLECT]

Added Llumar IRX tint and Blue Air 80 to my windshield. After driving for 6 hours and getting sun burned I figured it was time to fix that.

[lebaaron]

Purchased and installed this data reader in this location since I don't have a wireless charger, or lights ... I wanted to keep an eye on the gauges without to check on sport displays, it seems to fit the needs so far -

[Merlins Monte]

Originally Posted by MichaelNRW

Here are some more pictures with a direct comparison to the OEM light carpets.

Where do you get the lights that shine the BMW logo when the door is open? I've only seen M performance that are OEM.

[dhock_holiday]

Originally Posted by zazzau

M performance Alcantara armrest + door handle Alcantara armrest and Maxpider mats

Link for the door armrest? Not sure why BMW didn’t put any padding in this area, it’s rock hard plastic

[M340I///M]

Originally Posted by Stag77

Some shiny new quad tips! I was a little hesitant to purchase these because it seems that fitment on the LCI was less than ideal. I think they turned out quite nice. They're a huge PITA to get on right if you're a real nitpicker such as myself, though. I only wish the carbon cover extended just a bit more on the outside tips, so as to be covered completely by the diffuser, but it's only visible if you're down real low. Overall happy with how they turned out.

That looks really good, I have the 2021 m340i with the MPE, and looking for something like this, I ordered a nice glossy black diffuser from tuner Motorsports to go with my shadowline package and badges ,. Just need to find the tips that will fit the MPE.

Can you share where you got the tips? I saw some similar to yours at Monaco Motorsport and it claims fitment for the MPE but I’m skeptical.

[zlatko]

Originally Posted by dhock_holiday

Link for the door armrest? Not sure why BMW didn’t put any padding in this area, it’s rock hard plastic

There are variants in AliExpress:
https://www.aliexpress.com/item/1005006434710788.html
or
https://www.aliexpress.com/item/1005006639240024.html

I personally prefer(and use) the second one. Elbow pain on long journeys is gone now

[Portimao Blue M440ix]

Originally Posted by Merlins Monte

Where do you get the lights that shine the BMW logo when the door is open? I've only seen M performance that are OEM.

Here you go M Performance Dias For Door Projectors 63-31-2-469-631

[zazzau]

Originally Posted by dhock_holiday

Link for the door armrest? Not sure why BMW didn’t put any padding in this area, it’s rock hard plastic

Agreed, resting my arm on the door had always left me with some pain. Way too hard. I found the pad on eBay:

https://www.ebay.com/itm/19546289130...mis&media=COPY

[panki_86]

Yesterday i bought BMW product number 36112459546 at BMW dealership

That is a set of original BMW Style 795 M performance forged 20"(Ferric grey) rims + Pirelli P Zero (225 and 255) RFT, starmarked tires + TPMS sensors.
Set is calibrated from factory and tires are programed in TPMS sensors. So when you mount them in vehicle it automatically recognise summer tires and sizes. Also tire info is available in myBMW app

[jiimmmayyy]

Maxton Design spoiler.

[MichaelNRW]

Originally Posted by Merlins Monte

Where do you get the lights that shine the BMW logo when the door is open? I've only seen M performance that are OEM.

They´re original BMW parts.

[Merlins Monte]

Originally Posted by Portimao Blue M440ix

Here you go M Performance Dias For Door Projectors 63-31-2-469-631

Do you know the part# for the regular BMW logo like in the picture? Cant sport M projector with my non-M 330i. Next car