[JIMMYSAB]

Can someone point me to current cheat sheets? Specifically, I am looking for something to use on my 2020 X3 (G01).

[shawnsheridan]

Originally Posted by wmbdaddy123

can i get links for e-sys /psdzdata full/e-sys launcher please?

PM sent.

[ace e]

Originally Posted by shawnsheridan

PM sent.

shawnsheridan Looks like you are the legend for coding, i just swapped my cic in my e90 (no tones and no nav) as the previous was turning on once a week at best. Can you please pm me the necessary details to code this in.

[shawnsheridan]

Originally Posted by ace e

shawnsheridan Looks like you are the legend for coding, i just swapped my cic in my e90 (no tones and no nav) as the previous was turning on once a week at best. Can you please pm me the necessary details to code this in.

You are a long ways from home if you are asking for E-Series stuff in a G-Series thread. PM sent.

[Mramos1985]

Hi all, I have a G20 with factory date of 11/2022 and have German version and I need to change to spanish version, I can see the menu in spanish but navigation and bmw assistance does nor work in spanish...

Anybody knows if its possible to change with E-sys and works properly all the system in spanish?
Thx and BR

[shawnsheridan]

Originally Posted by Mramos1985

Hi all, I have a G20 with factory date of 11/2022 and have German version and I need to change to spanish version, I can see the menu in spanish but navigation and bmw assistance does nor work in spanish...

Anybody knows if its possible to change with E-sys and works properly all the system in spanish?
Thx and BR

PM sent

[G20agba]

Originally Posted by mrgicm

When driving at a certain speed the gearbox is in neutral.

I have seen this in eco/eco pro mode. I tried coding it for comfort mode, but i dont see the symbol of coasting. How do i know if the coding i did was successful or not?

[kickthecan]

can i get links for e-sys /psdzdata full/e-sys launcher please?

[shawnsheridan]

Originally Posted by kickthecan

can i get links for e-sys /psdzdata full/e-sys launcher please?

PM sent.

[renaldasc]

Hey Shawn,

Can you send me link for the E-sys / Launcher / PSDZdata for 330e,

thanks

[shawnsheridan]

Originally Posted by renaldasc

Hey Shawn,

Can you send me link for the E-sys / Launcher / PSDZdata for 330e,

thanks

PM sent.

[axtross96]

Yo Shawn, can you send me the links for latest PSdZ data , E-sys and Launcher? Thanks

[shawnsheridan]

Originally Posted by axtross96

Yo Shawn, can you send me the links for latest PSdZ data , E-sys and Launcher? Thanks

PM sent.

[moonliterider]

Hi Shawn
Could you guide me with how to remove the India specific 80/120 speed alarms . M340i LCI 2024 .
Thanks .

[shawnsheridan]

Originally Posted by moonliterider

Hi Shawn
Could you guide me with how to remove the India specific 80/120 speed alarms . M340i LCI 2024 .
Thanks .

No, sorry, I have no idea what those even are.

[moonliterider]

Originally Posted by shawnsheridan

No, sorry, I have no idea what those even are.

In India all vehicles have a mandated single alarm at 80kmph and a continuous beep at 120 kmph.This is implemented by all manufacturers .
In g20 pre LCI models while using bimmercode
the following FDL
GESCHW_LIMIT_INDIEN_SCHWELLE_1
GESCHW_LIMIT_INDIEN_SCHWELLE_2
were seen in 3001 KI_Parameter of the DKOMBI2

Setting values to 0*0 would deactivate 80kmph and 120 kmph alarms.

Also the FDL
WARNUNG_GESCHW_LIMIT
was seen in 3000 Anzeige_Konfiguration of the DKOMBI2 which could be deactivated.

Now (LCI Models)however these options are not seen .Where could these be accessible?
with E-SYS /Bimmerutility can we do?

[shawnsheridan]

Originally Posted by moonliterider

In India all vehicles have a mandated single alarm at 80kmph and a continuous beep at 120 kmph.This is implemented by all manufacturers .
In g20 pre LCI models while using bimmercode
the following FDL
GESCHW_LIMIT_INDIEN_SCHWELLE_1
GESCHW_LIMIT_INDIEN_SCHWELLE_2
were seen in 3001 KI_Parameter of the DKOMBI2

Setting values to 0*0 would deactivate 80kmph and 120 kmph alarms.

Also the FDL
WARNUNG_GESCHW_LIMIT
was seen in 3000 Anzeige_Konfiguration of the DKOMBI2 which could be deactivated.

Now (LCI Models)however these options are not seen .Where could these be accessible?
with E-SYS /Bimmerutility can we do?

Did you search all of DKOMBI or just section 3000 Anzeige_Konfiguration?

[slim25073]

Hi there, please send me the latest links for F40 esys, esys launcher and data files. Would really appreciate it.

[shawnsheridan]

Originally Posted by slim25073

Hi there, please send me the latest links for F40 esys, esys launcher and data files. Would really appreciate it.

PM sent.

[moonliterider]

Originally Posted by shawnsheridan

Did you search all of DKOMBI or just section 3000 Anzeige_Konfiguration?

I did , but shall redo once again and update .
Thanks .

[irzayev]

Hi!

How can I code g22

1. KOMBI to change ML/H to KM/H? DKOMBI4 (KOMBI-BASIS_G4)?

2. Road signs via KAFAS camera?

I did it on my F15 but no idea how to do on G22

[shawnsheridan]

Originally Posted by irzayev

Hi!

How can I code g22

1. KOMBI to change ML/H to KM/H? DKOMBI4 (KOMBI-BASIS_G4)?

2. Road signs via KAFAS camera?

I did it on my F15 but no idea how to do on G22

No idea on KM/H Conversion.

Road signs require an SLI FSC Code and Coding.