[Castrow]

Guys, i did the videon in motion unlock, but I still can't make the phone mirroring work while the car is moving. Is there anyway to make it work?

[RaptorStrike]

Does anyone know if and how to activate the auto seat heating function. I’ve done the steering wheel but miss the auto seat heating from when I had my G12.

EDIT: Found it. For anyone else wondering it’s done via expert mode in

Headunit:

AKT_AUTO_SITZE_FRONT, value: heizung
AKT_AUTO_LENKRADHEIZUNG, value: aktiv

BDC:

LHZ_CCM_IKF – aktive
IKF_ENABLE – IKF_ALLE_SITZE

Works a treat.

[sucoru]

Originally Posted by TheNine90

If you need the FSC file i can provide it.

Are you able to supply FSC codes for the G05 KAFAS4? namely Wrong Way Warning and Priority Warning (Stop Sign Give Way Warning etc) If so please PM me with details

[TheNine90]

Originally Posted by sucoru

Are you able to supply FSC codes for the G05 KAFAS4? namely Wrong Way Warning and Priority Warning (Stop Sign Give Way Warning etc) If so please PM me with details

PM sent

[fifthelement89]

Originally Posted by BelgianBimmer7

Hi guys, I just took delivery of my 32Oe G21 LCI last week and have started playing around in Bimmercode. I've added Sport+ to the car.

I was wondering if I could add Xtraboost as well. I saw the option during coding Sport+ mode. I'm asking because I'm somebody that struggles with placebo effects lol. Has anyone else coded in the Xtraboost on a 320e with real results?

Thanks for any info!

I already did this question ahah

Unfortunately I believe it doesn't work this way. I have a 320e sport from 2021.

We have 163hp plus 111 on the electric motor. It should have 274hp. I don't know where the rest of the power is..

330e have 184hp plus 111. But I dont know where it gets the rest of the power.

Xtraboost I believe its more a reprograming that we don't have.

If you somehow know how to do it without having to reprogram the ecu, hit me up!

[brianeck]

I have a 2022 340i and my Tachometer cuts off at 6,000 RPMS after changing the gauge settings - previously I was using the M Instrument Cluster and I had messed with some settings to get the yellow pre-redline shift leds in place.

Anyone know where the setting is to get my RPM gauge to go to 7k or 8k since it clearly revs over 5500 where the red hash marks start? For that matter I think it revs over 6000 where the entire gauge ends if you're really on it too.

Pics tomorrow. I also figured out how to get 4 distinct colors in the g20 2021 platform LEDs (its nothing ground breaking) but I haven't yet seen a post describing how the "White" main light HEX code actually somehow seperates from the LED strip and only into the door lights. . . I feel like some nerdy lighting folks will like this.

[brianeck]

Updated with photo - need to know how to change the RPM x 1000 to like 7,000 or more, as my car clearly revs higher than 6000 (m340i).

[brianeck]

Originally Posted by brianeck

Updated with photo - need to know how to change the RPM x 1000 to like 7,000 or more, as my car clearly revs higher than 6000 (m340i).

Okay FYI its DZM Variante, and I decided to go with B58 "ohnte" which cuts off at 7,000 RPMS even (hashed lines go 6,000 to 6,500). B58 standard appears to have the endpoint at 7,400, with the hashed lines beginning at 6500 and ending at 7000 or so.

[acmilangr]

Originally Posted by gnolivos

If anyone knows how to set the orange button brightness separately from the screens, please chime in.
I find that the buttons are too dim when I set the screens to the appropriate brightness for night driving.
Heck I'd love the buttons to be 100% all the time.

Anyone about this?

[imported_nick]

I have tried everything but cannot get LIC_FEATURE_2 to work on the G20... Does anyone know how to make the SML act as DRL/Parking Light???

I want the side mirrors to be constantly illuminated while driving (not only blinking when blinker is on).

I tried similar things to:

https://www.bimmerfest.com/threads/b...ys-on.1428699/
https://x3.xbimmers.com/forums/showthread.php?t=2054475
https://cartechnology.co.uk/showthread.php?tid=71437

But something else is different and it's not changing anything...

I tried changing the LIC_NIVEAU_OVERRIDE_INDEX and LIC_NIVEAU_OVERRIDE_DATA_0 from US spec to ECE spec and still didn't work..

Anyone know how to do it on G20??

[maks98m]

Originally Posted by TheNine90

PM me. i can help you

I can write you a private message. Contact me on Telegram if you can @y_y7707

[maks98m]

Can you tell me how to code that the MGU and cluster image would have a car with M bumper. My 330i did not have the M package at the factory.

[Taleseeker]

I was wondering that all posts mention bimmerutility, but then all the codes are listed in the posts.

I downloaded Esys 3.39.1, PSdZ files and got myself the OBD2 enet cable.

Can I not just do these edits on expert mode in Esys? Do I need bimmerutiliy?

Also is there any resources to read up on adding FSC files mentioned in the previous posts? I would like to activate traffic sign recognition in my car too.

Thank you very much in advance, this whole thread is filled with gems.

[G30M]

if i deactivate ASD activation code, how to i reactivate the activation code? (bimmercode)

[irfanmixmaster]

Hello friends. I have bmw f34 lci 2018 with digital cluster and speedometer to 260km/h. Is this posible to change to 330km/h with bimmercode or not? Please help me I realy want to change it because its much better with that.

[540i]

Has anyone been able to code side mirror turn signal to DRL’s on the g20 on g30 It’s Lic_Features2 in expert mode anyone know what the coding is for the new g20 body style

Reference photo is a 540i(g30)

[The_Tok'Ra]

Hey Guys,

Looking for a little advice. I bought an ENET cable from Amazon (UK) and it has a 1.5K Ohm resistor between pins 8 and 16.

I've read that it should be a 510 Ohm resistor to work properly, but that was for a F series car. I have a G series car, a G21 M340i XDrive.

Will the cable still work for me, or do I ned to change the resistor to a 510 Ohm resistor (1/4 watt)

Thanks!

[patjan]

Originally Posted by irfanmixmaster

Hello friends. I have bmw f34 lci 2018 with digital cluster and speedometer to 260km/h. Is this posible to change to 330km/h with bimmercode or not? Please help me I realy want to change it because its much better with that.

Yes, just enable Alpina.

[G20agba]

Originally Posted by Bambazonke

Three choices mate
1.Wait for an OTA update
2. Buy an Enet to OBD cable for $25 off eBay Send a pm to Shawn Sheridan for links to the latest Esys Program & Pzsdata files which will be free and then search Tokenmaster on YouTube and watch his tutorials on how to do FDL coding. In his one tutorial he tells you how to reset it back to factory settings by right clicking on the ECU and then pressing the option code in the sub menu. It is quite simple and you can also backup your new files too for future reference. PS you will need a windows laptop for this option
3.Buy BimmerUtility for $100 which will include the Esys program and all the functions of Bimmercode plus a whole lot more.

Anybody who is using Expert Mode in Bimmercode extensively I strongly suggest you upgrade to BimmerUtility The transition is not that much more complex and you have the added comfort if things go pear shaped you can always resort to your original factory settings in a couple of steps.

I have both BU and BC and use BimmerCode on my iPad for quick setup and simple mods/tests on ECU's that Stephan has given access to. If things go wrong I always have ESys/BU as a backup to fix it.

I have produced a G series cheat sheet that is available on Easy Bimmer Coding Facebook Group page that promotes BimmerUtility. BC users can download and use to code options not preprogrammed by BC. Please note Traffic Light Assist and other driver assist functions will not work as BC does not support the coding of the SAS3 and DSC_VIP ECU's

Can you send the facebook group link or the cheat sheet for g20 coding here please? I cant find it. Thank you

[Bambazonke]

Link to Cheatsheet on FB

[G20agba]

Originally Posted by montsov

Hello everybody, after reading this post i was very tempted to give it a try, so i have enabled the HVAC_ REMOTE_ENGINE_START and now i have the option to precondition the car if i have a departure schedule, but it was not possible to check the box “Starting engine for clim. control”, after some digging I found these two parameters in Bimmercode- STANDKKLIMA_MOTORLAUF - changed to aktiv and VORKONDITIONIERUNG_KLIMA - changed to aktiv. Now its possible to chek the box for “Starting engine for clim. Control”. I’ve set an schedule departure after 15 mins and when i got back to the car after 10-15 mins it was not running, but when i got in there was message wich stated that the preconditioning was not possible because of low battery voltage. I will keep you updated if i have more progress. I’m sorry for the bad English and the long post.

PS. My car is 07/2019 330i xdrive US/Canada spec, imported to EU(no connected services)

By coding these, does this mean i dont have to purchase connected drive anymore?

[Adict]

Hi guys , is it easy to code sport plus mode to 2019 G20 model without it ?
Also is it possible to code fog light to go on while turning into corner and how to code brake force to blink 5 times while hard braking .
With bimmer code