[RamboM340]

BIMMERPOST / Classifieds

Asking Price:

Sold

Or Best Offer

Item Interest

Active Autowerke full exhaust w/ carbon fiber tips for G20 M340i and G series M440i 2020 to 2022
LOCAL PICKUP ONLY!!
Exhaust tips are tack welded in place as shown in some pics. 1 exhaust clamp is missing.

Used for less than 500 miles before switch to M performance exhaust.





Located in San Diego area

[Jsun21]

May I ask why you decided to switch to mpe? I believe the AA would be more louder and obnoxious, while the mpe would be quieter but more refined.

[RamboM340]

Originally Posted by Jsun21

May I ask why you decided to switch to mpe? I believe the AA would be more louder and obnoxious, while the mpe would be quieter but more refined.

Sure , I switched because the AA was just a bit too much for me. Although most RPM ranges sounded amazing I could not stand the resonance around 2k RPM. If you read the AA thread here there are plenty of people who love the exhaust so it's a preference thing.

I love the MPE and should have done it from the start. It sounds more "sharp" where as the AA is a lot deeper of a sound. If not for the resonance I would have been fine with it but I've had an RSX typeS with a Skunk2 exhaust and I'm over those days....

[yoon_209]

Local and interested

Do you know how this compares to dinan or awe touring

[RamboM340]

Originally Posted by yoon_209

Local and interested

Do you know how this compares to dinan or awe touring

Sorry I don't have any experience with those exhausts to be honest. Never heard one in person.

[yoon_209]

Originally Posted by RamboM340

Sorry I don't have any experience with those exhausts to be honest. Never heard one in person.

Np, when you say resonance are you referring to drone?

[Jsun21]

Originally Posted by yoon_209

Local and interested

Do you know how this compares to dinan or awe touring

I had the awe touring exhaust on my previous f30 340i. It was really obnoxious. To be honest, after I got the awe touring, I did not drive the car as hard since it was so loud. But that could just be me. I preferred the mppsk on the f30 340 over any aftermarket exhaust. My friend recently took off his awe track exhaust from his m340i cuz it was way too loud, keep it mind he had a catless downpipe with it. Now with my m440i I have been reluctant to get an aftermarket exhaust.

[RamboM340]

Originally Posted by yoon_209

Np, when you say resonance are you referring to drone?

Yah there is some drone around 2,000 rpm

[Hoping4Dravit]

Originally Posted by RamboM340

Yah there is some drone around 2,000 rpm

Off topic question, is the MPE exhaust valved?

Thanks

[RamboM340]

Originally Posted by Hoping4Dravit

Off topic question, is the MPE exhaust valved?

Thanks

Yes the MPE is valved , it actually comes with a new set of valves when purchased.

[RamboM340]

bump!

[KeepUp]

Hoping4Dravit yea MPE is valved. I got MPE installed and was able to keep all my factory controls X.

[jou365]

Any chance you could ship it to northern California?

[RamboM340]

Originally Posted by jou365

Any chance you could ship it to northern California?

Hey sorry not looking to ship it at the moment.

[jou365]

Originally Posted by RamboM340

Hey sorry not looking to ship it at the moment.

I can pick up in So Cal in about two weeks do you have a number I can text you at?

[RamboM340]

Originally Posted by jou365

I can pick up in So Cal in about two weeks do you have a number I can text you at?

Sent you a PM

[mondayze]

no drone with the MPE?

[RamboM340]

Originally Posted by mondayze

no drone with the MPE?

I don't notice much if any drone really with the MPE. I just installed AA downpipe and its perfect now!

[G20_Rick]

Originally Posted by RamboM340

I don't notice much if any drone really with the MPE. I just installed AA downpipe and its perfect now!

Do you have any video of your MPE + AA downpipe? I have MPE myself and interested in the AA downpipe. Curious to hear how it sounds.

Also, MPE is valved? How to you open/close the valves?

[RamboM340]

Originally Posted by G20_Rick

Do you have any video of your MPE + AA downpipe? I have MPE myself and interested in the AA downpipe. Curious to hear how it sounds.

Also, MPE is valved? How to you open/close the valves?

I forgot to grab a video this weekend , I'll try sometime this week.

The MPE is valved just as the stock system is. Mine came with new valves so just plug them into stock harness.

[Yoleto]

Originally Posted by RamboM340

Sure , I switched because the AA was just a bit too much for me. Although most RPM ranges sounded amazing I could not stand the resonance around 2k RPM. If you read the AA thread here there are plenty of people who love the exhaust so it's a preference thing.

I love the MPE and should have done it from the start. It sounds more "sharp" where as the AA is a lot deeper of a sound. If not for the resonance I would have been fine with it but I've had an RSX typeS with a Skunk2 exhaust and I'm over those days....

I had a ‘02 RSX Type-S with a Skunk2 Megapower exhaust too! I got so fed up with the drone that I started wearing ear plugs on long drives. 😅

[RamboM340]

Originally Posted by G20_Rick

Do you have any video of your MPE + AA downpipe? I have MPE myself and interested in the AA downpipe. Curious to hear how it sounds.

Also, MPE is valved? How to you open/close the valves?

Sorry for late reply but got some sounds clips, hopefully this could help someone down the road.

MPE + AA Downpipe

Cold start : https://www.youtube.com/shorts/BEHiraQvyXQ

Warm and small rev :