[Doctorcreampie]

Originally Posted by shawnsheridan

I think it is a 10 post minimum now. You can always PM me on Bimmerfest.

Hi Shawn,

i have few questions, which software to you think is the best one or best to start ?

i found, BimmerUtility, Esysultra and from Tokenmaster Launcher pro v5 but i heard from Tokenmaster that he does not response every time.

Greetings from Germany

[shawnsheridan]

Originally Posted by Doctorcreampie

Hi Shawn,

i have few questions, which software to you think is the best one or best to start ?

i found, BimmerUtility, Esysultra and from Tokenmaster Launcher pro v5 but i heard from Tokenmaster that he does not response every time.

Greetings from Germany

I use BimmerUtility.

[Gona]

Hello, do not tell me how to code the smooth closing of the trunk in the HKFM2 block, as I understand it, in order to program, you need to set parameters in several positions. I encode with E SIS 3.40

[Almaretto]

Originally Posted by Gona

Hello, do not tell me how to code the smooth closing of the trunk in the HKFM2 block, as I understand it, in order to program, you need to set parameters in several positions. I encode with E SIS 3.40

As you wish, I will not tell you how to code truck.

[Nembus]

Hey Shawn, thanks for helping other people out, can you share the E-sys, Launcher and psdzdata? I got a ENET cable and plan on getting BU and doing some programming/playing around. I need to replace my headlight and need to program the new headlight in this weekend. Plan on doing a tune in the future and playing with whatever stuff.

Thanks

[shawnsheridan]

Originally Posted by Nembus

Hey Shawn, thanks for helping other people out, can you share the E-sys, Launcher and psdzdata? I got a ENET cable and plan on getting BU and doing some programming/playing around. I need to replace my headlight and need to program the new headlight in this weekend. Plan on doing a tune in the future and playing with whatever stuff.

Thanks

PM sent.

[Krzysztof4n]

Hello everyone
I'm new to this forum and read a lot of posts about coding. I am in awe of your knowledge and experience, especially your Shawn. Could I have a link to download Esys which I will be able to do some coding in my BMW G01(2019.08)
Thank you and best regards.

[shawnsheridan]

Originally Posted by Krzysztof4n

Hello everyone
I'm new to this forum and read a lot of posts about coding. I am in awe of your knowledge and experience, especially your Shawn. Could I have a link to download Esys which I will be able to do some coding in my BMW G01(2019.08)
Thank you and best regards.

Your Receive PM function is disabled. PM me when working.

[Gavroche]

Hi Shawn
Can I have the latest coding tool information, too? Wait for the new g series coming soon. Thank you!

[shawnsheridan]

Originally Posted by Gavroche

Hi Shawn
Can I have the latest coding tool information, too? Wait for the new g series coming soon. Thank you!

PM sent.

[Liquid_Ice]

Was trying to VO Code my G20 to remove the 5AP coding, and followed the VO coding instructions - but now when I go to Read ECU data I get an error on BDC_BODY3:

"CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>"

I get similar errors if I try to Code the BDC_BODY3 ECU.

If I try to reinject the CAFD files, I get additional CAFD's that don't say "FFFFFFFF_255_255_255" but I still get this Short-Vin error.

Anyone have any ideas how to fix this?

[shawnsheridan]

Originally Posted by Liquid_Ice

Was trying to VO Code my G20 to remove the 5AP coding, and followed the VO coding instructions - but now when I go to Read ECU data I get an error on BDC_BODY3:

"CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>

CAFD_FFFFFFFF_255_255_255 Fehler:
<CpsData object contains a Short-Vin with an invalid character.>"

I get similar errors if I try to Code the BDC_BODY3 ECU.

If I try to reinject the CAFD files, I get additional CAFD's that don't say "FFFFFFFF_255_255_255" but I still get this Short-Vin error.

Anyone have any ideas how to fix this?

Asked and answered:

https://www.bimmerfest.com/threads/c.../post-13752979

[Liquid_Ice]

Does the 2020 G20 M340i have Active Sound Design (ASD)? I am pretty sure it does because I can hear it.

I tried the cheat code to disable it and it can't find ASD_INSIDE in the RAM ECU FDL Coding. Tried searching for ASD but didn't come up with any results that I'd feel comfortable disabling.

Using E-Sys 3.38.2, LauncherPro 5.2.0, PSdZData_Lite_v4.37.42, not sure if I have to change to a different version or anything.

[Pyo_man]

Hi Liquid_Ice.

I think LauncherPRO5.2 have old parameter mappings, so you can't find it.
I recommend BimmerUtility because it support latest parameter mappings.

But if LauncherPRO used it try this coding.

RAM 4223
3001 Audio und ASD
Audio und ASD_27_27_1 activ(01) -> inactiv(00)
eg:Audio und ASD_27_27_1 mean ASD_INSIDE.

I think you could change ASD_INSIDE parameter.

Thank you.

[Liquid_Ice]

Originally Posted by Pyo_man

Hi Liquid_Ice.

I think LauncherPRO5.2 have old parameter mappings, so you can't find it.
I recommend BimmerUtility because it support latest parameter mappings.

But if LauncherPRO used it try this coding.

RAM 4223
3001 Audio und ASD
Audio und ASD_27_27_1 activ(01) -> inactiv(00)
eg:Audio und ASD_27_27_1 mean ASD_INSIDE.

I think you could change ASD_INSIDE parameter.

Thank you.

Thanks! Strangely, ASD_27_27_1 doesn't show up either, I have a ASD_26_26_1 and ASD_27_27_3 and _4, but not the one you referenced.

Wish I had realized that LauncherPro was not as good as BimmerUtility - literally just bought the LauncherPro license 2 days ago. Not sure I want to spend another $99 after having just spent $50!

EDIT- I checked in the Vehicle Profiler Viewer and it showed ASD_26_26_1 as being applicable to my vehicle, so I tried changing it to not active and that seems to have disabled ASD for me! Thanks for the tip, wish there was a good cheat sheet that maps these to a description of what it does.

[deusexe]

Originally Posted by siegester

So far, I have successfully coded the following:

• Remove legal disclaimers (HU_MGU cheat)
• m startup animation (HU_MGU cheat)
• ASS memory (dme cheat, code with engine off)
• ASD off (RAM cheat)
• air con memory (IHKA cheat)
• video in motion (HU_MGU cheat)
• close trunk from fob (hkfm2 cheat)
• close trunk from door switch (hkfm2 cheat)
• Coasting (HU_MGU cheat)
• Speed Correction (dkombi cheat)
• 5x Turn Indicator (HU_MGU cheat)
• Lane change assistance (hu_mgu, sas cheat)
• Comfort+ Mode (HU_MGU and BDC_BODY3 cheat)
• Auto activate heated steering wheel when cold (hu_mgu, bdc_body) This was enabled from the factory for me when I was updated to 07.2020
• comfort+ mode (bdc_body cheat)
• enable sailing (bdc_body cheat)
• anti-dazzle/no glare high beams (BDC_BODY3 cheats)
• independent rear turn indicators (EU style but still red)(BDC_BODY3 cheats)

Is there a full path somewhere which values need to be encoded, not just modules? I would like to exclude sailing in particular, but I don't know where? The bdc_body module is listed here on the forum, and HU_MGU on the GitHub website. Which is valid and which exact row-value do I need to change?

[Liquid_Ice]

Originally Posted by deusexe

Is there a full path somewhere which values need to be encoded, not just modules? I would like to exclude sailing in particular, but I don't know where? The bdc_body module is listed here on the forum, and HU_MGU on the GitHub website. Which is valid and which exact row-value do I need to change?

If you download all of the cheat codes available on github, when you open the FDL Editor for the CAFD that corresponds with the correct module, you can click "refresh" in the lower right hand corner (at least with Launcher Pro) and the cheat codes will show up for that CAFD. Then check the box for that cheat code and click "Review" to see what changes it will make and then "Apply" to make the changes to the NCD file.

For BDC_BODY3 there are a number of CAFD's at least for my car - so I went into the Cheat Code XMLs to figure out which CAFD number corresponded with the change I wanted.

Cheat codes are available here: https://github.com/packetpilot/bmw-f/tree/master/cheats

For Launcher Pro, I downloaded the cheat codes and put them in "C:\Program Files\TokenMaster\E-Sys Launcher PRO\FDLCodes" then go to cheat codes in Launcher Pro before you launch E-Sys and make sure all of the cheat code boxes are checked.

You can also just look into each cheat code XML file to figure out what specific parameters get changed for each cheat but it seemed easier to me to use the Cheat Codes themselves.

[deusexe]

Originally Posted by Liquid_Ice

Cheat codes are available here: https://github.com/packetpilot/bmw-f/tree/master/cheats

But your cheats are for the F series and the thread is about the G series.
I am asking about the lines of codes because from my experience with e-sys in the F series and many problems after coding, I am going to use Bimmercode in a new car.

[Liquid_Ice]

Originally Posted by deusexe

But your cheats are for the F series and the thread is about the G series.
I am asking about the lines of codes because from my experience with e-sys in the F series and many problems after coding, I am going to use Bimmercode in a new car.

The coding itself hasn't changed that much. I just used those cheat codes yesterday to code a bunch of stuff in my 2020 M340i xDrive, which is a G-series (G20).

Also, Siegester has a cheat code file posted in that github repo specifically for the G20.

Speaking of being in the wrong thread - this thread is on ESYS, if you're planning to use Bimmercode, why don't you go to one of the threads about Bimmercode such as this one?:

https://g20.bimmerpost.com/forums/sh....php?t=1789488

There is even a post in that thread that answers your question on Coasting: https://g20.bimmerpost.com/forums/sh...3&postcount=49

[deusexe]

Thanks a lot

[michael.bramblett]

Hey everyone got my g20 less than 24 hours ago and already miss adaptive beam from my last car… I’ve used BimmerCode a lot but going to take a crack at BU. Can I have the latest coding info please??

Also, confused on cheat sheets. If I save them, does that mean they’re automatically all applied to the car? Or just a reference on where to go and what values to change? I’ve been watching vids on YouTube but still a tad confused. Thanks!

[michael.bramblett]

Hey everyone got my g20 less than 24 hours ago and already miss adaptive beam from my last car… I’ve used BimmerCode a lot but going to take a crack at BU. Can I have the latest coding info please??

Also, confused on cheat sheets. If I save them, does that mean they’re automatically all applied to the car? Or just a reference on where to go and what values to change? I’ve been watching vids on YouTube but still a tad confused. Thanks!