[mikeyb74]

Originally Posted by helmet91

Yeah, I completely space cadeted that one. LOL


Can you run VIN WBA73AP08MCG01730 in ETK? I pulled that from a 430i at a dealer near where we used to live. It has black Sensatec.

The pictures are really dark, but I can see the pads: https://www.bmwoffairfax.com/new/BMW...f1307e53fc.htm

The VIN is giving me 51 16 6 997 205 and 51 16 6 997 207 for part numbers for these pieces and are on intergalactic backorder. So these are the sensatec or leather pads.

[helmet91]

Very interesting... Thanks for doing the legwork.

[Vmaxx]

Originally Posted by mikeyb74

The 076 and 077 are the pieces from my G20 which are not sensatec or leather but the hard plastic.

51 16 6 997 207 and 51 16 6 997 205 which are the leather pads I posted above. These sell for around $250.00 ea. I don't think I'll be ordering any at this point.

Nice. Do you know the part numbers for the black leather with blue stitching?

[mikeyb74]

Originally Posted by helmet91

Very interesting... Thanks for doing the legwork.

You are welcome!

Originally Posted by Vmaxx

Nice. Do you know the part numbers for the black leather with blue stitching?

I haven't seen part numbers as of yet. But they should be available.

[Vmaxx]

Originally Posted by mikeyb74

You are welcome!



I haven't seen part numbers as of yet. But they should be available.

Ok, do you know of any suppliers who sell them online?

[helmet91]

Has anyone pulled the trigger on this upgrade?

[StevenDS85]

Originally Posted by helmet91

Has anyone pulled the trigger on this upgrade?

Not really. However I went to the BMW HQ in Bornem (Belgium) where I had the opportunity to take a look at an M3 with this option. Those leather pieces would be an awesome upgrade over those hard plastic ones. The mid console tunnel is the same as on the G20. I noted down the VIN number, but the sales person couldn’t guarantee that they would fit ... . So it’s a matter of taking the hit.

On any of the online BMW parts shops I cannot find the specific parts to order ...

[helmet91]

Originally Posted by StevenDS85

Not really. However I went to the BMW HQ in Bornem (Belgium) where I had the opportunity to take a look at an M3 with this option. Those leather pieces would be an awesome upgrade over those hard plastic ones. The mid console tunnel is the same as on the G20. I noted down the VIN number, but the sales person couldn’t guarantee that they would fit ... . So it’s a matter of taking the hit.

On any of the online BMW parts shops I cannot find the specific parts to order ...

Yeah, it doesn't look like any European based online parts sources list the pads. Most US based shops do. They're charging $180-200 each. Fortunately, I have relatively easy access to getting stuff from the US. So yes, it's a matter of just pulling the trigger and hoping I get lucky.

Does anyone have a good DIY for this install?

There are a handful of simple OEM Plus type cosmetic "mods" I'd like to do while still under warranty. Once that's up I'll move on to the performance side.

[StevenDS85]

For the DIY guide we can look to:
https://g20.bimmerpost.com/forums/at...7&d=1594639690

And/or a short youtube clib to remove center console trim. Looks straight forward ...

From where would you order?

[helmet91]

www.oempartsource.com has 51-16-6-997-205 for $171 and 51-16-6-997-207 for $186.

Thanks for the DIY link.

[phayze]

Does it fit the G20?

Originally Posted by helmet91

www.oempartsource.com has 51-16-6-997-205 for $171 and 51-16-6-997-207 for $186.

Thanks for the DIY link.

[helmet91]

Originally Posted by phayze

Does it fit the G20?

Theoretically... yes?

[AtticusHoy]

The lack of a knee guard was probably the biggest aesthetic and ergonomic issue I had with the g20. I mean, cars that are multiple segments below the G20 have something other than hard plastic there.

I would try this first but I'm so mechanically disinclined that I couldn't be trusted to even know if the fit was wrong or my installation was wrong. So hopefully someone will take the plunge soon.

[Long Driver]

Originally Posted by helmet91

Has anyone pulled the trigger on this upgrade?

I did. The CF insert is a matte finish not shiny like the M3.

The alcantara knee pads don't come into play for me though.

I bought the sport rear splitter, CF spoiler, MPE and side skirts. Doing it again, I'd opt to save the $1,335 and get the open pore wood insert instead.

[Digzz]

Originally Posted by mikeyb74

According to ETK these are the same depending on the options on the G20 and G22. Here is a screen shot of the basic plastic trim piece.

Looks like the leather padded trim isn't listed as fitting the G20. If the basic plastic piece fits the padded piece should as well.

How did you get the parts for the G22 ? The online version doesn't list the G22 for some reason.

[helmet91]

Originally Posted by Digzz

How did you get the parts for the G22 ? The online version doesn't list the G22 for some reason.

I believe he works at a dealer.

[mikeyb74]

Originally Posted by Digzz

How did you get the parts for the G22 ? The online version doesn't list the G22 for some reason.

Originally Posted by helmet91

I believe he works at a dealer.

Helmet is correct I do work in a parts department at a large BMW dealer. I still want to retrofit these to mine.

I'm curious to see if the LCI G20/G21 will get the padded knee pieces next year.

[youngsandwich]

FYI I noticed the other day my local M Performance site lists the alcantara pieces separately if anyone is interested the pn is 51 59 5 A27 1B6

[MarkoSK]

Hi, I've been trying to follow this thread - can someone please tell me what part number(s) fit a MY2021 G20 330e produced in 10/2020? Thanks in adance!

[OM3RTA]

Originally Posted by MarkoSK

Hi, I've been trying to follow this thread - can someone please tell me what part number(s) fit a MY2021 G20 330e produced in 10/2020? Thanks in adance!

If it's just the kneepads you are after then the part number as mentioned by youngsandwich is what your after.

[automodz.ca]

Hello everyone!

Not sure if you guys would be interested but we actually have this knee piece finished in Italian alcantara and it fits exactly to OEM spec. It's attached using 3M double sided tape. I know there's some doubt when it comes to 3M, but our customers have installed our interior trim without any issues and the quality is incredible. It's a great option compared to the OEM replacement trim. We're still working on a full replacement but if any of you are interested in the Alcantara pieces or carbon interior trim just give us a PM and we'll set up an order for you. Price is $125 shipped within US/Canada.



Cheers!

[mikeyb74]

automodz, These are really nice. I wish someone would offer aftermarket black leather knee pads.